AutoBlanket - ERO-TEX The Ground Control Leaders
AutoBlanket - ERO-TEX The Ground Control Leaders
AutoBlanket - ERO-TEX The Ground Control Leaders
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>The</strong> Future of<br />
ECB’s is Here…<br />
• Install more blanket per day<br />
• 1 operator and 1 ground person<br />
• Reduce labor costs by 50% per yard<br />
• Will operate on steep slopes<br />
• Patented (USPTO # 6,663,324) with<br />
additional patents pending<br />
• Holds a 500 SY roll of ECB<br />
• Pneumatically installs 4” to 6” staples<br />
• Multiple staple patterns available<br />
<strong>The</strong> <strong>AutoBlanket</strong> is a hydraulic attachment for<br />
a skid loader or tractor that automatically installs<br />
erosion control blankets (ECB’s). <strong>The</strong> hydraulics<br />
power the air compressor which enables<br />
the staples to be pneumatically driven<br />
through the ECB and into the soil. <strong>The</strong> staplers<br />
are attached to an articulating mounting system<br />
that enables the machine to work on varied<br />
terrain. <strong>The</strong> PLC is conveniently located in<br />
the cab to provide control over machine operation,<br />
staple patterns, ground speed and air<br />
pressure.<br />
….Don’t Be<br />
Left Behind<br />
Nordloh Industries, LLC 4300 43rd Ave. Kenosha, Wisconsin 53144<br />
Phone 262.925.8305 Web Site www.autoblanket.com
<strong>AutoBlanket</strong> Specifications<br />
Power Plant Requirements<br />
Auxiliary Hydraulic Circuit<br />
50 HP Tractor or Skid loader with rated operating<br />
capacity of 2000 lbs<br />
Skid mount or 3 point attachment<br />
12 Volt Power Outlet (Accessory line to battery available)<br />
Minimum 13 GPM hydraulic flow<br />
Machine weights (depending on type of machine)<br />
<strong>AutoBlanket</strong> Specifications<br />
HYDRAULICS………………………….Hydraulic Circuit<br />
Parker 501/502 (or equal) for skid loader<br />
Parker 121 ( or equal) for tractor<br />
Minimum 13 GPM hydraulic flow<br />
PTO hydraulic engine may be required<br />
or low flow tractors<br />
Parker 308-9210-101 Motor<br />
Chief Hydraulic cylinder, p/n 215-113<br />
Sun Hydraulic Valves<br />
ELECTRICAL…………………………..Minimum 12 volts required for valve and PLC operation<br />
12 Volt Power Outlet<br />
12 volt power line to battery available<br />
Mitsubishi programmable logic controller (PLC)<br />
Mitsubishi touch screen<br />
Norgren manifold & valves<br />
Norgren pneumatic fittings<br />
Hoffman nema #12 enclosure and operator station<br />
Quadrature Encorder<br />
PNEUMATICS ………………………..Atlas Copco LF 7.5 Compressor<br />
Air cooled piston compressors<br />
25 cfm Capacity<br />
Nominal working pressure 145 psig<br />
Motor Size-2 to 10 hp (1.5 to 7.5 kW)<br />
Noise Level-67 to 86 dB(A)<br />
10 Gal air tank<br />
PERFORMANCE……………………...Operating speed 1-2 mph<br />
Blanket Roll diameter 32"<br />
Blanket Core diameter 4"<br />
Blanket Roll width 8'-0"<br />
Maximum working pressure 100 PSI<br />
STAPLE GUNS ……………………….Haubold PN 29150<br />
Magazine capacity 200 staples<br />
Staple length 4 - 6"<br />
16 Gauge staple with 1" crown<br />
40 Staples per cartridge<br />
Maximum working pressure 80-100 PSI<br />
Specifications may change without notice<br />
Nordloh Industries, LLC 4300 43rd Ave. Kenosha, Wisconsin 53144<br />
Phone 262.925.8305 Web Site www.autoblanket.com