MINIDIGGER WAYS MINIDIGGER - Euromat

MINIDIGGER
Track Widening
Engine YANMAR
2TNV70
Engine power Kw 7,6 - Hp 10
Operating weight with canopy Kg 1000
Operating weight without canopy Kg 960

Optional: 4 columns Canopy
Optional: 2 columns Canopy
(folded)
Maintenance
Track widening

2840 (2960)
1620 (1770)
2200
2070 (2180)
1360 (1490)
1026
395
329
146
850 tetto
180
760
990
MINIDIGGER
2784
2350 (2420)
1295 (1340) 500
930
1255
3130 (3280) 935
3175 (3315)
(…) = version with diggigng arm L = 900mm
ES 90 ZT - LIFTING CAPACITY
Opening arm from the rotation's center
Lifting capacity at 1,0 m height
1,5 2 2,5 max
DOZER FRONT END 290 175 125 105
IDLER CENTER 335 235 200 175
CRAWLER CENTER 335 190 115 90
60°
70°
1 m
1,5 m
2 m
2,5
MAX
171
219
27°
TECHNICAL SPECIFICATIONS
Operating weight standard digger Kg 960
Operating weight with 2
columns canopy Kg 1000
Operating weight with
4 columns canopy Kg 1000
Travelling speed km/h 1,8 - 3,8
Slew speed rpm 9,5
ENGINE
Type
YANMAR 2TNV70
Power (2450 rpm) Kw 7,6 - Hp 10
Displacement cc 570
Number of cylinders n° 2
Cooling system
water
Consumption Lt/h 2,5
Alternator V (A) 12 (40)
Battery V (Ah) 12 (45)
HYDRAULIC SYSTEM
Pump type
n°2 gear pumps
Pump displacement cc 4,8 - 4,8
Pump capacity lt./min 23
Auxiliary system lt./min 23
Circuit calibration pressure Bar 170
PERFORMANCES
Bucket breaking force
(standard arm) ISO 6015 kgf 1010
Arm breaking force
(standard arm) ISO 6015 kgf 752
Traction force kgf 1050
Ground bearing pressure kg/cm 2 0,28
Max slope 60% - 30°
DIMENSIONS
Total width mm 760 - 990
Max dumping height with
standard arm (optional arm) mm 2070 - (2180)
Total height mm 2200 (canopy)
Rear rotation radius. mm 500
Max digging depth
standard arm (optional arm) mm 1620 - (1770)
Digging arm length std (optional)mm 750 - (900)
Tracks width mm 180
Rollers number (for each side) 2
FILLINGS
Fuel tank lt. 10
Hydraulic oil tank lt. 9,5
Hydraulic circuit capacity lt. 15
Cooling system capacity lt. 5
Engine oil lt. 1,5
CONTROLS
Bucket, boom, swing, slew
2 lever
Travel and steering
2 lever
Dozer blade
lever
Auxiliary hydraulics system
left pedal
Boom swing
right pedal
The lifting capacity is based on the ISO 10567 and it does not exceed more than the 75% of static
tipping load or more than the 87% of the hydraulic lifting capacity of the machine.

CONCRETE SOLUTIONS. ALWAYS
• Control’s protection
• Rubber tracks
• Landfill blade
• Translation duble speed
• Digging arm 750 mm
• Air dry filter with indicator of clogging
STANDARD EQUIPMENTS
• Spare parts catalogue, use and maintenance and
tollbox
• Working light on the first arm
• Protection on blade cylinder
• Auxiliary Hydraulic circuit on the digging arm
Ruggeri Grafiche Srl (Mo) printed 08/10
OPTIONAL EQUIPMENTS
• 2 Columns Canopy (EN 13531) - FOPS
(ISO 3449) with seat belt
• 4 Columns Canopy (EN 13531) - FOPS
(ISO 3449) with seat belt
• Digging arm 900 mm
• Mechanic quick coupling for buckets and fittings
• Standard buckets from 200 mm to 500 mm
• Ditch cleaning buckets 800 mm
• Trapezoidal bucket
• Demolition hammer
• Drill with bits from 150 mm up to 300 mm of
diameter
SAMPIERANA s.p.a.
I - 47026 SAN PIERO IN BAGNO (FC)
Via Leonardo Da Vinci, 40
Tel. +39 0543.904211 - Fax +39 0543.918520
www.sampierana.com - info@sampierana.com
Dealer: