Proximity Readers
Proximity Readers
Proximity Readers
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
The ioProx reader electronics are vandal and weather resistant, and are encapsulated in epoxy (except the P600 which is sealed with a rubber gasket).<br />
All readers have an integrated piezo buzzer and bicolor LED indicating system/reader status. Optional tamper switch and user input modules are available.<br />
Easy installation<br />
The ioProx reader's small size provides flexibility for mounting; they can be<br />
installed on walls, door mullions, or single and double gang boxes.<br />
Voltage Requirements<br />
Depending on the model selected, power requirements range 5 to 14 VDC or 12<br />
to 28 VDC (P600), for compability with virtually any controller on the market. This<br />
allows a system to be upgraded simply by changing readers and cards, without<br />
rewiring<br />
Unshielded Cable<br />
The ioProx readers can be installed using unshielded cable to a distance of up to<br />
1000 ft. (300 m) from the controller. Using this type of cable significantly reduces<br />
installation costs.<br />
XSF Security<br />
XSF (eXtended Secure Format) readers are compatible only with Kantech<br />
software, with access to over 137 billion unique codes. Kantech's XSF cards<br />
provide increased security and absolute guarantee against card duplication.<br />
P10SHL<br />
Standard shell card<br />
P20DYE<br />
Due-Sub card<br />
<strong>Proximity</strong> <strong>Readers</strong><br />
P30DMG<br />
Due-Sub card with Mag<br />
Stripe<br />
P40KEY<br />
Keytag<br />
P50TAG<br />
ioProx selfadhesive<br />
Tag<br />
Integrated Command Buttons (P200/P400)<br />
An optional integrated command button module can be added to the P200 and<br />
P400 models. The two buttons are form C contacts that can be used to perform<br />
different functions such as arming/disarming an alarm panel, serving as a door<br />
bell when connected to a buzzer, etc.<br />
Integrated 12-Touch Keypad<br />
The P555 provides an ideal method of increasing security by combining reader<br />
and keypad while keeping the cost down. Since the keypad data is transmitted<br />
on the same wires as reader data, an existing reader only installation can be<br />
easily upgraded by replacing the reader with a P555KP reader with integrated<br />
keypad. There is no need to pull additional cabling. The keypad output is based<br />
on industry standard 8-bit burst format.<br />
Ordering Information<br />
<strong>Readers</strong> XSF format:<br />
(for Kantech software only)<br />
<strong>Readers</strong> Wiegand 26-bit format:<br />
P100XSF, P200XSF, P300XSF, P400XSF,<br />
P555KPXSF & P600 (selectable)<br />
P100W26, P200W26, P300W26,<br />
P400W26, P555KPW26 & P600<br />
(selectable)<br />
Compatible proximity cards:<br />
P10SHL, P20DYE, P30DMG, P40KEY &<br />
(dual encoded XSF & Wiegand 26-bit format) P50TAG<br />
Optional Parts:<br />
P-BUTN/200, P-BUTN/400 & P-TAMP<br />
Technical Specifications<br />
P100 P200 P300 P400 P555KP P600<br />
Typical read range up to 4 “ (10 cm) up to 5” (12.5cm) up to 5.5” (14cm) up to 6” (15cm) up to 4.5” (11.4cm) up to 29” (73cm)<br />
Input voltage 5 to 14VDC 5 to 14VDC 5 to 14VDC 5 to 14VDC 5 to 14VDC 12 to 28VDC<br />
Current DC maximum 85mA 85mA 85mA 85mA 85mA 1A<br />
Dimensions (HWD) in. 2.75 x 1.75 x 0.7 4.50 x 1.75 x 0.7 4.50 x 2.75 x 0.7 4.50 x 4.50 x 0.7 4.39 x 2.97 x 0.90 11.25 x 11.25 x 1.25<br />
Dimensions (HWD) mm 70 x 44 x 17.8 114.5 x 44 x 17.8 114.5 x 70 x 17.8 114.5 x 114.5 x 17.8 111.5 x 75 x 23 285 x 285 x 31.5<br />
Weight 1.37oz (39g) 1.83oz (52g) 2.92oz (83g) 3.94oz (112g) 4.8oz (135g) 38.27oz (1085g)<br />
Color Black Black Black Black Black Black<br />
Transmit frequency 125 kHz 125 kHz 125 kHz 125 kHz 125 kHz 125 kHz<br />
LED indicator Bicolor (red,green) Bicolor (red,green) Bicolor (red,green) Bicolor (red,green) Bicolor (red,green) Bicolor (red,green)<br />
Piezo buzzer Integrated Integrated Integrated Integrated Integrated Integrated<br />
Operating temperature (F) -30 0 F to 150 0 F -30 0 F to 150 0 F -30 0 F to 150 0 F -30 0 F to 150 0 F -30 0 F to 150 0 F -30 0 F to 150 0 F<br />
Operating temperature (C) -35 0 C to 65 0 C -35 0 C to 65 0 C -35 0 C to 65 0 C -35 0 C to 65 0 C -35 0 C to 65 0 C -35 0 C to 65 0 C<br />
Reader Format XSF or Wiegand 26-bit XSF or Wiegand 26-bit XSF or Wiegand 26-bit XSF or Wiegand 26-bit XSF or Wiegand 26-bit XSF or Wiegand 26-bit<br />
selectable<br />
Keypad Format N/A N/A N/A N/A 8-bit burst N/A<br />
Maximum distance from controller:<br />
5VDC: 500ft (150m) 500ft (150m) 500ft (150m) 500ft (150m) 500ft (150m) -------------<br />
12VDC: 1000ft (300m) 1000ft (300m) 1000ft (300m) 1000ft (300m) 1000ft (300m) 500ft (150m)<br />
28VDC: ------------- ------------- ------------- ------------- ------------- 1000ft (300m)<br />
Cable Types 3 twisted pairs, 3 twisted pairs, 3 twisted pairs, 3 twisted pairs, 3 twisted pairs, #18AWG UNSHIELDED,<br />
solid conductor solid conductor solid conductor solid conductor solid conductor Belden 5304UE<br />
#22AWG UNSHIELDED #22AWG UNSHIELDED #22AWG UNSHIELDED #22AWG UNSHIELDED #22AWG UNSHIELDED<br />
Belden ref #8742 Belden ref #8742 Belden ref #8742 Belden ref #8742 Belden ref #8742<br />
Command buttons (optional) N/A P-BUTN/200 N/A P-BUTN/400 N/A N/A<br />
Tamper switch (optional) N/A P-TAMP P-TAMP P-TAMP N/A Integrated<br />
Certifications FCC, CE & UL FCC, CE & UL FCC, CE & UL FCC, CE & UL FCC, CE FCC, CE & UL<br />
Tel: 1-450-444-2040 Fax: 1-450-444-2029<br />
Toll free: 1-888-KANTECH (1-888-526-8324)<br />
www.kantech.com<br />
Product specifications and availability subject to change without notice. Certain<br />
product names mentioned herein may be trade names and/or registered trademarks<br />
of other companies.<br />
Item # 21807<br />
DN1208-0405<br />
©2004 Kantech
Change language