Catalog - PFI Germany Start

More documents

Recommendations

Info

RVT, 3030 Zipper Tester Zipper Tester Designed to assess durability of zip fasteners according to DIN 3490. The zipper chain is opened and closed under transversal and longitudinal strain. Afterwards, the loss of mechanical strength is assessed by examining the cross-lateral strength. The machine is suitable for testing all commercially available zip fasteners. The machine comes with 18 weights to carry out different tests. Technical Data Footprint: 600 × 500 mm Supply voltage: 230 V Supply frequency: 50 Hz Reference N° RVT, 3030 Phone: 0049 (0) 63 31 2490505E-Mail: peter.schultheis@pfi-germany.de 60
SB, 3004 Sand Bath Sand Bath Allows assessment of thermal insulation properties of footwear conforming to EN ISO 20344 (pr. EN 15090). For this test, heat sensors are attached on the sample shoe, which is then filled up with stainless steel balls. The sand bath is heated and the sample is put in place. During this test, the temperature increase over time is measured. After the test, the sample is inspected for possible damage. Accessories • 5 kg of glass sand Accessories (available as optional extras) • 4 kg of stainless steel balls (Ø 5 mm) Technical Data Footprint: approx. 630 × 400 mm Supply voltage: 230 V Supply frequency: 50 Hz Reference N° SB, 3004 Phone: 0049 (0) 63 31 2490505E-Mail: peter.schultheis@pfi-germany.de 61
Page 1 and 2:
TEST EQUIPMENT MADE IN GERMANY Impr
Page 3 and 4:
Support in Assistance Programmes Yo
Page 5 and 6:
Water Vapour Permeability .........
Page 7 and 8:
APM 2000, 3053/1 Abrasion Testing M
Page 9 and 10: AM, 3077 Anti Static Measuring Unit
Page 11 and 12: AP, 3080/2/3/4 Pillar Drill with De
Page 13 and 14: BBP, 3116 Belt Flex Tester Belt Fle
Page 15 and 16: BVL, 3022 Outsole Bending Device Be
Page 17 and 18: BFM, 3029 Insole Flexometer Insole
Page 19 and 20: CM, 3026 Crockmeter Crockmeter Allo
Page 21 and 22: RF, 3005 Ross Flexing Machine Ross
Page 23 and 24: KPM, 3083 Flex Cracking Test Machin
Page 25 and 26: DSPM, 3035 Shock Absorption Testing
Page 27 and 28: DOM, 3073 Domplastometer Domplastom
Page 29 and 30: FH, 3057 Fallhammer Fall Hammer For
Page 31 and 32: DFM, 3125 Dynamic and static Flexib
Page 33 and 34: EFMG 3D, 3052 3D Foot Measuring Dev
Page 35 and 36: FMG/M, 3051/10 Foot Measurement Dev
Page 37 and 38: MFMG, 3048/1 Mechanical Foot Measur
Page 39 and 40: GSP, 3034 Slip Resistance Testing M
Page 41 and 42: KFM 3089/01/02/05 Edge Dyeing Machi
Page 43 and 44: KGP, 3047 Suitcase Handle Test & Fa
Page 45 and 46: KOW, 3003 Contact Heat Contact Heat
Page 47 and 48: LST-5, 3075 Laboratory-Scale Cuttin
Page 49 and 50: LP, 3092 Latex Spray Pistol Latex S
Page 51 and 52: MAR, 3016/2 Martindale Martindale F
Page 53 and 54: NLP V.2, 3122/10 Nickel release Tes
Page 55 and 56: PEN, 3023 Penetrometer Penetrometer
Page 57 and 58: MS-R, 3070 Rebound Tester Rebound T
Page 59: RET, 3059/2 Rub Fastness Tester Rub
Page 63 and 64: SE, 3065/1/2 Ramp Tester Ramp Teste
Page 65 and 66: SFH, 3136 Blade cut resistance test
Page 67 and 68: SAPE, 3098 Shock Absorption Tester
Page 69 and 70: ESMG, 3019 Electronic In-Shoe Measu
Page 71 and 72: LM, 3079/1/2/3/4 In-Shoe Length Mea
Page 73 and 74: WDA, 3020 Water Vapour Absorption W
Page 75 and 76: BUM, 3042/2/3 Joint Girth Gauge Joi
Page 77 and 78: BMB, 3042/5 Joint Girth Measuring T
Page 79 and 80: EA, 3067/1/7 Energy Absorption Ener
Page 81 and 82: HZ, 3067/2 Holding Device for Toe P
Page 83 and 84: NDST, 3067/4b Nail Penetration Test
Page 85 and 86: DSH, 3139 Nail Penetration Testing
Page 87 and 88: STAF, 3067/6 Stitch Tear Resistance
Page 89 and 90: Punching Knife Full built, height =
Page 103 and 104: Appendix All Testing Machines and D
Page 105 and 106: Flexometer (FM, 3006) 3D Foot Measu
Page 107 and 108: Zipper Tester (RVT, 3030) DIN 3419
Page 109 and 110: Nail Penetration Testing for Comple
Page 111 and 112:
Punching Knife (SM 3027/40) Punchin
show all

Catalog - PFI Germany Start

Create successful ePaper yourself

Delete template?

Save as template?