Data Sheet - Bicker Elektronik

Industrial PC power supplies
BES-560T
600 Watt
– 48 V DC input
TÜV and UL approved
High efficiency >80 %
5
YEARS
5
YEARS
Extended Extended Delivery Delivery Eco Operation Eco
Operation
DC input
The DC PC power supply BES-560T has been designed for use in
industry, telecom and transport. Thanks to its broad input voltage
range of –36 to –72 V DC it can be supplied via – 48 V DC as well
as – 60 V DC power networks. With a high output power load of
+12 V DC it is capable of safely supplying the necessary power for
high-performance graphic applications. The fan on roller bearing
is temperature controlled and provides a tachometer signal for
monitoring.
Te c h n i c a l d a t a
Input voltage -48 V DC (-36…-72 V)
Input current
Inrush current
Efficiency
Hold up time
Power-Good-Signal
Protection
16 A max. at -48 V DC
80 % at full load
Appr. 1 ms
Switch on delay 100…500 ms
Safety / EMC CE, EN 60950-1, UL 60950-1
Short circuit protection: Switch off with auto recovery
Inverse polarity protection input: existing
Overvoltage protection: +3.3 V (+3.6…+4.3 V), +5 V (+5.6…+6.5 V), +12 V (+13.2…+15 V),
switch off
Temperature Operating: 0…+70 °C, startable from -20 °C / Storage: -20…+80 °C
Derating +40…+70 °C, 1 % / °C
MTBF
Max. operation altitude
Humidity
Dimensions (W x D x H)
Weight (net)
141236 h according to MIL-HDBK-217F at +25 °C with fan
3100 m
Operating: 10…85 % RH, non-condensing / Storage: 10…90 % RH, non-condensing
150 x 140 x 86 mm ±0.5 mm
1.65 kg
Article Output Output current Load Line Cross Ripple &
No. voltage min max regulation regulation regulation Noise
BES-560T +3.3 V 0.5 A 25 A ±5 % ±1 % ±5 % ±50 mV
+5 V 1.0 A 25 A ±5 % ±1 % ±5 % ±50 mV
+12 V 2.0 A 45 A ±5 % ±1 % ±5 % ±120 mV
-12 V 0 A 0.8 A ±10 % ±1 % ±5 % ±120 mV
+5 V sb 0.1 A 3.5 A ±5 % ±1 % ±5 % ±50 mV
Max. output power is 600 W, combined max. output power at +3.3 V and +5 V is 40 A. Ripple and Noise was measured by a 20 MHz bandwidth limited oscilloscope with connected 220 µF
electrolytic capacitor and 100 nF ceramic capacitor at each output.
As a power component this PSU is for assembly purposes only and must not be operated in unassembled condition. The final assembly has to comply with the valid EMC and safety standards.
Bicker Elektronik GmbH | 86609 Donauwörth | Germany
Tel. +49 906 70595-0 | info@bicker.de | www.bicker.de

Industrial PC power supplies
Drawing BES-560T
DC input
A
A'
Tolerance ±0.5 mm
Cable harness BES-560T
ATX/EPS, 550 mm
20+4 Pin
EPS, 550 mm
BLACK
RED
RED
RED
WHITE
BLACK
BLACK
BLACK
GREEN
BLACK
BLUE
ORANGE
(GND)
(+5V)
(+5V)
(+5V)
(–5V)
(GND)
(GND)
(GND)
(PSon)
(GND)
(-12V)
(+3,3V)
YELLOW (+12V) 8
YELLOW (+12V) 7
YELLOW (+12V) 6
YELLOW (+12V) 5
24
23
22
21
20
19
18
17
16
15
14
13
4
3
2
1
12
11
ORANGE
YELLOW (+12V1)
1098765 YELLOW (+12V1)
PURPLE (+5Vsb)
GREY (PG)
BLACK (GND)
RED (+5V)
BLACK (GND)
RED (+5V REMOTE SENSE)
4
RED (+5V)
3 BLACK (GND)
2 ORANGE (+3,3V)
1
ORANGE
ORANGE
(+3,3V REMOTE SENSE)
(+3,3V)
BLACK (GND)
BLACK (GND)
BLACK (GND)
BLACK (GND)
Specification is subject to change without notice. Errors excepted. Status as at: 11.07.2013
P4/EPS, 550 mm
4+4 Pin
PCI Express, 500 mm
6+2 Pin
PCI Express, 500 mm
6+2 Pin
SATA 90°, 350 mm
SATA 90°, 150 mm
HD, 400 mm
HD, 150 mm
HD, 150 mm
HD, 400 mm
HD, 150 mm
FDD, 150 mm
A1
YELLOW (+12V)
YELLOW (+12V)
YELLOW (+12V)
YELLOW (+12V)
8
7
6
5
4
3
2
1
BLACK (GND) 8 4 BLACK (GND)
BLACK (GND) 7 3 YELLOW (+12V)
BLACK (GND) 6 2 YELLOW (+12V)
BLACK (GND) 5 1 YELLOW (+12V)
BLACK (GND) 8 4 BLACK (GND)
BLACK (GND) 7 3 YELLOW (+12V)
BLACK (GND) 6 2 YELLOW (+12V)
BLACK (GND) 5 1 YELLOW (+12V)
ORANGE (+3,3V)
BLACK (GND)
RED (+5V)
BLACK (GND)
A1 YELLOW (+12V)
4 RED (+5V)
3 BLACK (GND)
2 BLACK (GND)
1 YELLOW (+12V)
4 RED (+5V)
3 BLACK (GND)
2 BLACK (GND)
1 YELLOW (+12V)
4 RED (+5V)
3 BLACK (GND)
2 BLACK (GND)
1 YELLOW (+12V)
4 RED (+5V)
3 BLACK (GND)
2 BLACK (GND)
1 YELLOW (+12V)
4 RED (+5V)
3 BLACK (GND)
2 BLACK (GND)
1 YELLOW (+12V)
4 YELLOW (+12V)
3 BLACK (GND)
2 BLACK (GND)
1 RED (+5V)
BLACK (GND)
BLACK (GND)
BLACK (GND)
BLACK (GND)
SATA, 450 mm
SATA, 150 mm
SATA, 450 mm
SATA, 150 mm
Fan control, 580 mm
ORANGE (+3,3V)
BLACK (GND)
RED (+5V)
BLACK (GND)
A1 YELLOW (+12V)
ORANGE (+3,3V)
BLACK (GND)
RED (+5V)
BLACK (GND)
A1 YELLOW (+12V)
ORANGE (+3,3V)
BLACK (GND)
RED (+5V)
BLACK (GND)
A1 YELLOW (+12V)
BLACK
N.C.
WHITE
ORANGE (+3,3V)
BLACK (GND)
RED (+5V)
BLACK (GND)
A1 YELLOW (+12V)
Tolerance ±20 mm
Bicker Elektronik GmbH | 86609 Donauwörth | Germany
Tel. +49 906 70595-0 | info@bicker.de | www.bicker.de