Industrial PC power supplies

UPS function
On the pages 106 to 140 you can find a variety of industrial PC power supplies with UPS function.
You did not find what you were looking for? Please do not hesitate to contact us! Our product range
of standard models as well as special editions offers much more. ( +49 (0) 906 70595-0
PCFL-180P-X2S2 150 W 85…264 V AC fanless 106
PCFD-180P-X2S 120 W 20…36 V DC fanless 108
BS17A-H24/2.0L battery pack 24 V DC NiMH battery 110
eNSP-300P-RS 200 W 85…264 V AC PS/2 112
eNSP-300P-USB 200 W 85…264 V AC PS/2 116
BP-2423N-B1 battery pack 24 V DC Maintenance-free lead battery 120
RBS01A-P24/2.2L battery pack 24 V DC Maintenance-free lead battery 121
eNSP3-450P-RS 350 W 85–264 V AC PS/2 122
eNSP3-450P-USB 350 W 85–264 V AC PS/2 126
BP-2423N battery pack 24 V DC Maintenance-free lead battery 130
RBS02A-P24/2.3L battery pack 24 V DC Maintenance-free lead battery 131
BS10A-H24/2.0L battery pack 24 V DC NiMH battery 132
BP-2425N battery pack 24 V DC Maintenance-free CYCLON cells 133
RUPS 2000-B1 UPS Management Software 134
Accessories 135

Industrial PC power supplies
UPS function
PCFL-180P-X2S2
150 Watt
UPS function with NiMH battery pack
No minimum load required
Special voltages possible
The ATX power supply PCFL-180P-X2S2 uniquely combines the
functions of a PC power supply with those of a UPS. Energy is
provided by a separate NiMH battery pack in a practical 3.5“
format. Upon request it is also available with additional 24 V DC
output voltage. A UPS software monitors the supplied system so
that operation without user supervision is possible. A fit-formcompatible
variation of the PCFL-180P-X2S2 is available with DC
input as well.
Te c h n i c a l d a t a
Input voltage
Input frequency
Input current
Efficiency
Hold up time
Power-Good-Signal
Protection
Insulation voltage
85…264 V AC (active PFC)
47…63 Hz
2 A (100 V AC) / 0.9 A (220 V AC)
77 % typ.
16 msec (without battery pack)
Switch on delay 100…500 msec
Switch off delay 1 msec
Short circuit protection: At each output, switch off, +5 V sb auto-recovery
At input: fuse
Overvoltage protection: +3.3 V (3.7…4.3 V), +5 V (5.7…6.7 V), 12 V (13.8…15.6 V),
+5 V sb (5.7…7 V)
Input / Chassis: 1500 V AC for 60 sec.
Input / Output: 1500 V AC for 60 sec.
Safety / EMC CE, EN 60950-1, UL 60950-1
Operating temperature 0…+60 °C
Derating 85…90 V, 80 % load +30…+60 °C 2% / °C fanless, 1.3 % / °C with fan
MTBF
100 000 h
Storage temperature -20…+70 °C
Operating humidity
Dimensions
Weight (net)
10…95 % RH, non-condensing
93 x 55 x 160 mm ±0.4 mm
0.85 kg
Product specific data
Vibration
UPS function
10…55 Hz with 2 G, duration 10 cycles, per x, y, z axis (out of operation)
By connection of battery pack BS17A-H24/2.0L
Article Output Output current heat sink fan peak Load Ripple &
No. voltage min max max max 5 Sek. regulation Noise
PCFL-180P-X2S2 +3.3 V 0 A 10 A 10 A 10 A 10 A ±5 % 50 mV
+5 V 0 A 10 A 10 A 10 A 10 A ±5 % 50 mV
+12 V 0 A 7.5 A 8.5 A 10 A 15 A ±5 % 120 mV
-12 V 0 A 0.3 A 0.3 A 0.3 A 0.3 A ±10 % 120 mV
+5 V sb 0 A 1 A 1 A 1.5 A 1.8 A ±5 % 50 mV
Max. output power is 90 W without fan, 100 W with heat sink (>1.6 K/W) and 150 W with fan cooling (30 m 3 /h). Combined output load at +3.3 and +5 V must not exceed 60 W in fanless operation,
it must not exceed 70 W for operation with heat sink, and with fan cooling (30 m 3 /h) it must not exceed 83 W. Ripple and noise was measured by a 20 MHz bandwidth limited oscilloscope with
connected 47 µF ceramic capacitor at each output.
This power supply is for assembly purposes only and it must not be operated in unassembled condition. The final assembly has to comply with the valid EMC standards.
106

Industrial PC power supplies
Drawing PCFL-180P-X2S2
UPS function
Tolerance ±0.4 mm
Optional accessories
Article No.
BS17A-H24/2.0L
RUPS 2000-B1
CB-PCFL
WH-M2022-500-01
WH-PS610-850
Description
NiMH battery pack
UPS Management Software (CD-ROM)
AC input cable / AWG 18 / ends open / 600 mm
PCFD/L-180P / 20 pin ATX connector / 500 mm
3x HD / 2x SATA / 1x FDD cable harness / 850 mm
WH-M2022-500-01:
ATX , 500 mm
Power BS17A-H24/2.0L
WH-PS610-850:
HD, 550 mm
SATA, 150 mm
SATA, 150 mm
HD, 550 mm
HD, 150 mm
FDD, 150 mm
Tolerance ±20 mm
107

Industrial PC power supplies
UPS function
PCFD-180P-X2S
120 Watt
+24 V DC input and UPS function
No minimum load required
Special voltages possible
The ATX power supply PCFD-180P-X2S with +24 V DC input
uniquely combines the functions of a PC power supply with
those of a UPS. Energy is provided by a separate NiMH battery
pack in a practical 3.5“ format. Other output voltages can be
provided upon request.
A UPS software monitors the supplied system so that operation
without user supervision is possible. A fit-form-compatible variation
of the PCFD-180P-X2S is available with AC input as well.
Te c h n i c a l d a t a
Input voltage
Input current
Efficiency
Power-Good-Signal
Protection
Insulation voltage
20…36 V DC
6.7 A max. (24 V DC)
82 % typ.
Switch on delay 100…500 msec
Switch off delay 1 msec
Short circuit protection: At each output, switch off, +5 V sb auto-recovery
At input: fuse
Overvoltage protection: +3.3 V (3.7…4.3 V), +5 V (5.7…6.7 V), 12 V (13.8…15.6 V),
+5 V sb (5.7…7 V)
Input / Chassis: 1000 V AC for 60 sec.
Input / Output: 1000 V AC for 60 sec.
Safety / EMC Designed according to EN 60950-1 and UL 60950-1
Operating temperature 0…+60 °C
Derating 22…20 V, 90 % load +30…+60 °C 2 % / °C fanless, 1.3 % / °C with fan
MTBF
100 000 h
Storage temperature -20…+70 °C
Operating humidity
Dimensions
Weight (net)
10…95 % RH, non-condensing
93 x 55 x 160 mm ±0.4 mm
0.71 kg
Product specific data
Vibration
UPS function
10…55 Hz with 2 G, duration 10 cycles, per x, y, z axis (out of operation)
By connection of battery pack BS17A-H24/2.0L
Article Output Output current heat sink fan peak Load Ripple &
No. voltage min max max max 5 Sek. regulation Noise
PCFD-180P-X2S +3.3 V 0 A 10 A 10 A 10 A 10 A ±5 % 50 mV
+5 V 0 A 10 A 10 A 10 A 10 A ±5 % 50 mV
+12 V 0 A 7.5 A 8.5 A 10 A 15 A ±5 % 120 mV
-12 V 0 A 0.3 A 0.3 A 0.3 A 0.3 A ±10 % 120 mV
+5 V sb 0 A 1 A 1 A 1.5 A 1.8 A ±5 % 50 mV
Max. output power is 90 W without fan, 100 W with heat sink (>1.6 K/W) and 120 W with fan cooling (30 m 3 /h). Combined output load at +3.3 and +5 must not exceed 60 W in fanless operation,
it must not exceed 70 W for operation with heat sink, and with fan cooling (30 m 3 /h) it must not exceed 83 W. Ripple and noise was measured by a 20 MHz bandwidth limited oscilloscope with
connected 47 µF ceramic capacitor at each output.
This power supply is for assembly purposes only and it must not be operated in unassembled condition. The final assembly has to comply with the valid EMC standards.
108

Industrial PC power supplies
Drawing PCFD-180P-X2S
UPS function
Tolerance ±0.4 mm
Optional accessories
Article No.
BS17A-H24/2.0L
RUPS 2000-B1
CB-PCFD
WH-M2022-500-01
WH-PS610-850
Description
NiMH battery pack
UPS Management Software (CD-ROM)
DC input cable / AWG 18 / ends open / 600 mm
PCFD/L-180P / 20 pin ATX connector / 500 mm
3x HD / 2x SATA / 1x FDD cable harness / 850 mm
WH-M2022-500-01:
ATX , 500 mm
Power BS17A-H24/2.0L
WH-PS610-850:
HD, 550 mm
SATA, 150 mm
SATA, 150 mm
HD, 550 mm
HD, 150 mm
FDD, 150 mm
Tolerance ±20 mm
109

Industrial PC power supplies
UPS function
BS17A-H24 / 2.0L
24 V / 2.0 Ah
Battery pack for PCFD-180-X2S / PCFL-180-X2S2
NiMH battery
Installation into 3.5“ drive slot
The NiMH battery pack BS17A-H24/2.0L serves to store energy for
the UPS PC power supplies PCFD-180-X2S / PCFL-180-X2S2. Due
to the higher energy density of the maintenance-free nickel metal
hydride cells back-up time is increased considerably – moreover,
they weigh much less as compared to lead batteries. The NiMH
battery pack is designed for installation into the 3.5“ drive slot of a
computer. A pin-and socket connector is provided for connection
to the UPS PC power supply.
Te c h n i c a l d a t a
Voltage
Capacitance
Battery type
24 V DC
2.0 Ah
Output power 97.2 W (18 V DC / 5.4 A)
Peak power (5 Sec.)
Backup time of a typical PC
Fuse
Charge current
NiMH battery, 9.6 V DC, in UPS mode 18 V DC via booster
0 °C / 80 W, +5 °C / 100 W, +10 °C / 110 W, +15 °C / 120 W, +20 °C / 130 W
100 W app. 5 minutes, 50 W app. 11 minutes
30 A
Operating temperature 0…+45 °C
Derating
Storage temperature
Dimensions
Weight (net)
0.2 A (15 h max.), internal charger
0…+5 °C, 78 W
-20…+30 °C, storage possible 1 year or less
-20…+40 °C, storage possible 90 days or less
-20…+50 °C, storage possible 30 days or less
101.5 x 25 x 180 mm ±0.5 mm
0.9 kg
Drawing BS17A-H24 / 2.0L
Cycle operation (constant charging and discharging)
diminishes the service life of the battery.
During storage the battery pack must be charged at +40 °C
every 3 months and at +25 °C every 6 months.
Tolerance ±0.5 mm
110

Industrial PC power supplies
Connection BS17A-H24 / 2.0L
UPS function
Serial Interface RS232
AC Fail PCFL-180P-X2S2
DC Fail PCFD-180P-X2S
Battery LOW
Shutdown
LED-Beschreibung
Output
In case of mains voltage failure (under 75 V AC) the level drops to -9 V DC.
If mains voltage is ok, the level is +9 V DC.
Output
In case of mains voltage failure (14 V DC, ±2 V) the level drops to -9 V DC.
If mains voltage is ok, the level is +9 V DC.
Output
If battery is low (battery voltage 7.2…8 V DC), ) the level drops to -9 V DC.
If battery is ok, the level is +9 V DC.
Input
Signal to switch off the PC power supply in UPS operation.
The level must be ≥2.4 V DC for ≥60 msec
Charge: green LED light
Trickle charge: LED flashes green (every 10 sec.)
Discharge: LED flashes green (quickly)
In case of Microsoft operating systems from Windows® 2000 onwards UPS switch-off can be done via the APM function
when activated in PC BIOS.
Optional accessories
Article No.
RUPS 2000-B1
WH-02VH02VH-250
WH-S1004-500-02
Windows® is a registered trademark of Microsoft Corp.
Description
UPS Management Software (CD-ROM)
Battery connector cable, length 250 mm
Interfacecable, length 500 mm (open end)
111

Industrial PC power supplies
UPS function
eNSP-300P-RS
200 Watt
Industrial PC power supply with UPS function
RS232 interface
Temperature range 0…+50 °C
UPS
The UPS PC power supply eNSP-300P-RS uniquely combines the
functions of a PC power supply with those of a UPS. Sudden voltage
drops or complete voltage failures are safely bridged. Energy
is provided by the external battery pack. The eNSP-300P-RS is
fit-form-compatible with conventional PC power supplies. The battery
pack can be installed into the 5 .25“ drive slot. Via the interface
cable that is part of the delivery the power supply can communicate
directly with the UPS service of Windows® operating systems.
Te c h n i c a l d a t a
Input voltage
Input frequency
Input current
Inrush current
Efficiency
Power-Good-Signal
Protection
Earth leakage current
Safety / EMC
85…264 V AC, active PFC
47…63 Hz
2.6 A max. (115 V AC) / 1.3 A max. (230 V AC)

Industrial PC power supplies
Article Output Output current Voltage Ripple &
No. voltage min max peak regulation Noise
eNSP-300P-RS +3.3 V 0 A 14 A 28 A ±4 % 50 mV
+5 V 1 A 21 A 30 A ±4 % 50 mV
+12 V 0 A 10 A 15 A ±10 % 150 mV
-5 V 0 A 0.3 A 0.3 A ±5 % 50 mV
-12 V 0 A 0.8 A 0.8 A ±5 % 100 mV
+5 V sb 0 A 1.5 A 2.5 A ±5 % 50 mV
UPS function
Combined max. output at +3.3 V and +5 V must not exceed 125 W (180 W peak). Combined max. output at +3.3 V, +5 V, and 12 V must not exceed 185 W (280 W peak). From a load of 12 V / >7 A
onwards a minimum load of >1.5 A is required at +5 V. From a load of +5 V / 21 A onwards a minimum load of app. 0.3 A is required at +12 V. Peak output can be 303 W for up to 3 seconds.
Ripple and noise was measured by a 20 MHz oscilloscope with connected 10 µF electrolytic capacitor and 0.1 µF ceramic capacitor at each output.
This power supply is for assembly purposes only and it must not be operated in unassembled condition. The final assembly has to comply with the valid EMC standards.
Drawing eNSP-300P-RS
4x M3
Tolerance ±0.5 mm
113

Industrial PC power supplies
Cable harness eNSP-300P-RS (Included in delivery)
UPS function
Pin assignment of backside connector
P2, P3,P4, P6, P7 (HD)
PIN No. Function
1 +12 V DC
2 COM
3 COM
4 +5 V DC
P5 (FDD)
PIN No.
Function
1 +5 V DC
2 COM
3 COM
4 +12 V DC
P8 (P4)
PIN No.
Function
1 COM
2 COM
3 +12 V DC
4 +12 V DC
AUX
PIN No.
Function
1 COM
2 COM
3 COM
4 +3.3 V DC
5 +3.3 V DC
6 +5 V DC
P1(ATX)
PIN No.
Function
1 +3.3 V DC
2 +3.3 V DC
3 COM
4 +5 V DC
5 COM
6 +5 V DC
7 COM
8 PWR-OK
9 +5 V SB
10 +12 V DC
P1 (ATX)
PIN No.
Function
11 +3.3 V DC default sense
+3.3 V DC
12 –12 V DC
13 COM
14 PS-ON#
15 COM
16 COM
17 COM
18 –5 V DC
19 +5 V DC
20 +5 V DC
PS2601-02, 500 mm
Tolerance ±15 mm
114

Industrial PC power supplies
Pin assignment of front connector
Serial interface RS232 (DSUB9)
AC Fail
Battery LOW
Shutdown
Output
In case of mains voltage failure, level drops to -9 V DC.
When mains voltage is ok, level is at +9 V DC.
Output
If battery is low, level drops to -9 V DC.
If battery is ok, level is at +9 V DC.
Input
Signal to switch off the PC power supply in UPS mode.
The level must be ≥2.4 V DC for ≥15 msec.
UPS function
Internal interface P12 open collector
AC Fail
Battery LOW
Shutdown
Output
In case of mains voltage failure, level drops to -9 V DC.
When mains voltage is ok, level is low.
Output
If battery is low, the level turns to high.
If battery is ok, level is low.
Input
Signal to switch off the PC power supply in UPS mode.
The level must be ≤0.4 V DC for >15 msec..
D-SUB interface Battery connection Internal interface
D-SUB9
PIN No.
Function
1 Batt low
2 N.C.
3 N.C.
4 Shut down
5 N.C.
6 N.C.
7 N.C.
8 AC fail
9 N.C.
BATT
PIN No.
Function
1 Batt +VE
2 Batt –VE
P12 Open collektor
PIN No. Function
1 COM
2 Shut down
3 AC fail
4 Batt. low
5 N.C.
6 Fan alarm
Optional accessories
Article No.
BP-2423N-B1
RBS01A-P24/2.2L
RUPS 2000-B1
ENSP3-REBOOT
Windows® is a trademark of the Microsoft Corp.
Description
Battery pack with lead batteries 24 V / 2.3 Ah
Battery pack with removable lead batteries (clip-on frame)
UPS Management Software (CD-ROM)
Automatic start and reboot board
115

Industrial PC power supplies
UPS function
eNSP-300P-USB
200 Watt
Industrial PC power supply with UPS function
USB interface
Temperature range 0…+50 °C
UPS
The UPS PC power supply eNSP-300P-USB uniquely combines the
function of a PC power supply with that of a UPS. The power supply
safely bridges sudden mains voltage drops as well as total power
failure. The installation of the eNSP-300P-USB is compatible with
conventional PC power supplies. Energy is provided by an external
battery pack in the practical 5.25“ format. Via an interface cable,
which is part of the delivery, the power supply can communicate
directly with the UPS service of Windows® operating systems.
Te c h n i c a l d a t a
Input voltage
Input frequency
Input current
Inrush current
Efficiency
Power-Good-Signal
Protection
Earth leakage current
Safety / EMC
85…264 V AC, active PFC
47…63 Hz
2.6 A max. (115 V AC) / 1.3 A max. (230 V AC)

Industrial PC power supplies
Article Output Output current Load Ripple &
No. voltage min max peak regulation Noise
eNSP-300P-USB +3.3 V 0 A 14 A 28 A ±4 % 50 mV
+5 V 1 A 21 A 30 A ±4 % 50 mV
+12 V 0 A 10 A 15 A ±10 % 150 mV
-5 V 0 A 0.3 A 0.3 A ±5 % 50 mV
-12 V 0 A 0.8 A 0.8 A ±5 % 100 mV
+5 V sb 0 A 1.5 A 2.5 A ±5 % 50 mV
UPS function
Combined max. output at +3.3 V and +5 V must not exceed 125 W (180 W peak). Combined max. output at +3.3 V, +5 V, and 12 V must not exceed 185 W (280 W peak). From a load of 12 V / >7 A
onwards a minimum load of >1.5 A is required at +5 V. From a load of +5 V / 21 A onwards a minimum load of app. 0.3 A is required at +12 V. Peak output can be 303 W for up to 3 seconds.
Ripple and noise was measured by a 20 MHz oscilloscope with connected 10 μF electrolytic capacitor and 0.1 μF ceramic capacitor at each output.
This power supply is for assembly purposes only and it must not be operated in unassembled condition. The final assembly has to comply with the valid EMC standards.
Drawing eNSP-300P-USB
4x M3
Tolerance ±0.5 mm
117

Industrial PC power supplies
Cable harness eNSP-300P-USB (Included in delivery)
UPS function
Pin assignment of backside connector
P2, P3,P4, P6, P7 (HD)
PIN No. Function
1 +12 V DC
2 COM
3 COM
4 +5 V DC
P5 (FDD)
PIN No.
Function
1 +5 V DC
2 COM
3 COM
4 +12 V DC
P8 (P4)
PIN No.
Function
1 COM
2 COM
3 +12 V DC
4 +12 V DC
AUX
PIN No.
Function
1 COM
2 COM
3 COM
4 +3.3 V DC
5 +3.3 V DC
6 +5 V DC
P1(ATX)
PIN No.
Function
1 +3.3 V DC
2 +3.3 V DC
3 COM
4 +5 V DC
5 COM
6 +5 V DC
7 COM
8 PWR-OK
9 +5 V SB
10 +12 V DC
P1 (ATX)
PIN No.
Function
11 +3.3 V DC default sense
+3.3 V DC
12 –12 V DC
13 COM
14 PS-ON#
15 COM
16 COM
17 COM
18 –5 V DC
19 +5 V DC
20 +5 V DC
CB-USB01, 500 mm
Tolerance: ±15 mm
118

Industrial PC power supplies
Pin assignment of front connector
Internal interface P12 open collector
AC Fail
Battery LOW
Shutdown
Output
In case of mains voltage failure, level is high.
In case of mains voltage failure, level is low.
Output
If battery is low, level is high.
If battery is ok, level is low.
Input
Signal to switch off the PC power supply in UPS mode.
Level must be ≤0.4 VDC for >15 msec.
UPS function
Internal Interface USB Interface Battery connector
P12 Open Collector
PIN No. Function
1 COM
2 Shut down
3 AC fail
4 Batt. low
5 N.C.
6 Fan alarm
USB
PIN No.
Function
1 V BUS
2 D–
3 D+
4 COM
BATT
PIN No.
Function
1 Batt +VE
2 Batt –VE
Optional accessories
Article No.
BP-2423N-B1
RBS01A-P24/2.2L
RUPS 2000-B1
ENSP3-REBOOT
Windows® is a registered trademark of Microsoft Corp.
Description
Battery pack with maintenance-free lead batteries
Battery pack with maintenance-free removable lead batteries in clip-on frame
UPS Management Software (CD-ROM)
Automatic start and reboot board
119

Industrial PC power supplies
UPS function
BP-2423N-B1
24V / 2.3 Ah
Battery pack for eNSP-300P series
Maintenance-free lead-battery
Installation into 5.25“ drive slot
The battery pack BP-2423N-B1 serves to store energy for the
UPS PC power supply eNSP-300P. It is designed for the installation
into a 5.25“ drive slot. It is connected to the UPS PC power
supply via a two-pole connector. A fuse for short-circuit protection
is integrated in the circuit. The equipped lead batteries are
maintenance-free.
Te c h n i c a l d a t a
Voltage
24 V DC
Capacitance
2.3 Ah
Number of batteries 2
Type of battery
Maintenance-free lead battery, 12 V
Backup time of a typical PC
200 W app. 3 minutes, 100 W app. 9 minutes
Fuse
20 A
Connector
JST, VL series
Operating temperature 0…+40 °C
Storage temperature -20…+50 °C
Dimensions
191 x 145 x 41.5 mm ±0.5mm
Weight (net)
2.7 kg
Drawing BP-2423N-B1
BATT
PIN No.
Function
1 Batt +
2 Batt –
Tolerance ±0.5 mm
During storage the battery pack should be recharged
every 6 months.
120

Industrial PC power supplies
RBS01A-P24/2.2L
24 V / 2.2 Ah
Fast battery change due to clip-on frame
„Plug and Play“ installation in 5.25“ drive slot
Maintenance-free lead battery
UPS function
The RBS01A-P24/2.2L battery pack is used as an energy store
for the UPD PC power supplies of the eNSP-300P series. For a
quick battery change the battery pack is provided with a rack.
Removing the battery pack is easy: just flip open the front plate
and extract the battery pack. Connection to the UPS PC power
supply is done via a 2-pole connector. A fuse in the connection
cable ensures short-circuit protection.
Te c h n i c a l d a t a
Voltage
24 V DC
Capacitance
2.3 Ah
Number of batteries 2
Type of battery
Maintenance-free lead battery, 12 V
Backup time of a typical PC
200 W app. 3.5 minutes, 100 W app. 9 minutes
Fuse
20 A internal
Connector
JST, VL series
Operating temperature 0…+40 °C
Storage temperature -20…+50 °C
Dimensions
149 x 245 x 42 mm ±0.5mm
Weight (net)
3.5 kg
Drawing RBS01A-P24/2.2L
BATT
PIN No.
Function
1 Batt +
2 Batt -
42,00 mm
160mm +/- 10mm
12,00 mm
10,00 mm
149,00 mm
146,00 mm
121,00 mm
245,00 mm
During storage the battery pack
should be recharged every 6 months.
50,00 mm 80,00 mm
M3
Tolerance ±0.5 mm
121

Industrial PC power supplies
UPS function
eNSP3-450P-RS
350 Watt
Temperature range 0…+60 °C
RS232 communication interface to PC
No minimum load required
UPS
The eNSP3-450P-RS combines UPS functions with PC power
supply. The UPS shows a conventional PS/2 form factor and can
replace all standard PC power supplies. In case of an interrup tion
of the source, the UPS functions will set up instantaneously and
feed the load with energy taken from its external 5.25’’ batterypack.
Communication to the PC is realized thanks to its RS232
interface compatible with all most common operating systems.
Te c h n i c a l d a t a
Input voltage
Input frequency
Input current
Inrush current
Efficiency
Power-Good-Signal
Protection
Earth leakage current
Safety / EMC
85…264 V AC, active PFC
47…63 Hz
6 A max. (115 V AC) / 3 A max. (230 V AC)

Industrial PC power supplies
Article Output Output current Voltage Ripple &
No. voltage min max peak regulation Noise
eNSP3-450P-RS +3.3 V 0 A 20 A 30 A ±4 % 50 mV
+5 V 0 A 22 A 33 A ±4 % 50 mV
+12 V 0 A 22 A 30 A ±5 % 120 mV
-12 V 0 A 0.5 A 0.5 A ±5 % 120 mV
+5 V sb 0 A 2 A 2.5 A ±5 % 100 mV
Max. output on +3.3 V and +5 V combined must not exceed 160 W (200 W peak). Max output on +3.3 V, +5 V and 12 V combined must not exceed 334 W (430 W peak). Peak output can be 450 W for
up to 5 seconds. Ripple and Noise was measured by a 20 MHz bandwidth limited oscilloscope with connected 10 µF electrolytic capacitor and 0.1 µF ceramic capacitor at each output.
As a power component this PSU is for assembly purposes only and must not be operated in unassembled condition. The final assembly has to comply with the valid EMC and safety standards.
UPS function
Drawing eNSP3-450P-RS
4x M3
Tolerance ±0.5 mm
123

Industrial PC power supplies
Cable harness eNSP3-450P-RS (Included in delivery)
UPS function
CB-ENSP3-20+4, 500 mm
CB-ENSP3-4+4, 550 mm
CB-ENSP3-HSF
HD, 460 mm
SATA, 150 mm
SATA, 200 mm
HD, 400 mm
HD, 150 mm
FDD, 150 mm
PS2601-02, 500 mm
Tolerance ±15 mm
124

Industrial PC power supplies
Wiring front
Serial interface RS232 (DSUB9)
AC Fail
Battery LOW
Shutdown
Output
If AC input fails (below 75 V AC), level decreases to -9 V DC.
If AC input ok, level is at +9 V DC.
Output
If the battery is low, level decreases to -9 V DC.
If the battery is ok, level is at +9 V DC.
Input
Signal to switch off the PSU in UPS mode.
The level has to be ≥2.4 V DC and has to be connected ≥60 msec.
UPS function
Wiring back
MAIN
PIN No.
Function
HD
PIN No.
Function
SIG
PIN No.
Function
12 V
PIN No.
Function
1 +3.3 V Sense
1 +3.3 V
1 AC fail
1 COM
2 +3.3 V
2 +5 V
2 Shut down
2 COM
3 COM
3 COM
3 Batt low
3 COM
4 +5 V
4 COM
4 N.C.
4 COM
5 COM
5 +12 V
5 Fan M
5 +12 V
6 +5 V
6 +3.3 V
6 PS_ON
6 +12 V
7 COM
7 +5 V
7 COM
7 +12 V
8 PWR_OK
8 COM
8 +3.3 V Sense
8 +12 V
9 +5 V sb
10 +12 V
9 COM
10 +12 V
9 N.C.
10 +5 V sb
11 +12 V
12 +3.3 V
13 +3.3 V
14 -12 V
15 COM
RS232 (DSUB9)
PIN No. Function
BATT
PIN No.
Function
16 PS_ON
1 Batt low
1 Batt +
17 COM
2 N.C.
2 Charge Cont.
18 COM
3 N.C.
3 Batt -
19 COM
4 Shut down
20 N.C.
5 N.C.
21 +5 V
6 N.C.
22 +5 V
7 N.C.
23 +5 V
8 AC fail
24 COM
9 N.C.
The reference of the RS232 signal is COM (mainboard).
For Microsoft operating systems from Windows® 2000 onwards the UPS can be switched off via the APM function which has to be activated
in the PC-BIOS.
Optional accessories
Article No.
BP-2423N
BP-2425N
RBS02A-P24/2.3L
BS10A-H24/2.0L
RUPS 2000-B1
ENSP3-RS-INT
ENSP3-REBOOT
Windows® is a trademark of the Microsoft Corp.
Description
Battery pack with lead batteries 24 V / 2.3 Ah
CYCLON battery pack, 24 V / 2.5 Ah / 5 1/4“ format
Battery pack with lead batteries, removable (clip-on frame)
Battery pack with NiMH-batteries 24 V / 2.0 Ah
UPS management software (CD-ROM)
Internal RS232 interface holder
Automatic startup PC board
125

Industrial PC power supplies
UPS function
eNSP3-450P-USB
350 Watt
UPS power supply for industrial PC
Temperature range 0…+60 °C
USB Interface
UPS
The eNSP3-450P-USB combines UPS functions with PC power
supply. The UPS shows a conventional PS/2 form factor and can
replace all standard PC power supplies. In case of an interrup tion
of the source, the UPS functions will set up instantaneously and
feed the load with energy taken from its external 5.25‘‘ battery
pack. Communication to the PC is realized thanks to its USB
interface compatible with all most common operating systems.
Te c h n i c a l d a t a
Input voltage
Input frequency
Input current
Inrush current
Efficiency
Power-Good-Signal
Protection
Earth leakage current
Safety / EMC
85…264 V AC, active PFC
47…63 Hz
6 A max. (115 V AC), 3 A max. (230 V AC)

Industrial PC power supplies
Article Output Output current Voltage Ripple &
No. voltage min max peak regulation Noise
eNSP3-450P-USB +3.3 V 0 A 20 A 30 A ±4 % 50 mV
+5 V 0 A 22 A 33 A ±4 % 50 mV
+12 V 0 A 22 A 30 A ±5 % 120 mV
-12 V 0 A 0.5 A 0.5 A ±5 % 120 mV
+5 V sb 0 A 2 A 2.5 A ±5 % 100 mV
Max. output on +3.3 V and +5 V combined must not exceed 160 W (200 W peak). Max output on +3.3 V, +5 V and 12 V combined must not exceed 334 W (430 W peak). Peak output can be 450 W for
up to 5 seconds. Ripple and Noise was measured by a 20 MHz bandwidth limited oscilloscope with connected 10 µF electrolytic capacitor and 0.1 µF ceramic capacitor at each output.
As a power component this PSU is for assembly purposes only and must not be operated in unassembled condition. The final assembly has to comply with the valid EMC and safety standards.
UPS function
Drawing eNSP3-450P-USB
4x M3
Tolerance ±0.5 mm
127

Industrial PC power supplies
Cable harness eNSP3-450P-USB (Included in delivery)
UPS function
CB-ENSP3-20+4, 500 mm
CB-ENSP3-4+4, 550 mm
CB-ENSP3-HSF
HD, 460 mm
SATA, 150 mm
SATA, 200 mm
HD, 400 mm
HD, 150 mm
FDD, 150 mm
CB-USB01, 500 mm
Tolerance ±15 mm
128

Industrial PC power supplies
Wiring back
MAIN
PIN No.
Function
1 +3.3 V Sense
2 +3.3 V
3 COM
4 +5 V
5 COM
6 +5 V
HD
PIN No.
Function
1 +3.3 V
2 +5 V
3 COM
4 COM
5 +12 V
6 +3.3 V
SIG
PIN No.
Function
1 AC fail
2 Shut down
3 Batt low
4 N.C.
5 Fan M
6 PS_ON
12 V
PIN No.
Fuction
1 COM
2 COM
3 COM
4 COM
5 +12 V
6 +12 V
UPS function
7 COM
7 +5 V
7 COM
7 +12 V
8 PWR_OK
8 COM
8 +3.3 V Sense
8 +12 V
9 +5 V sb
10 +12 V
9 COM
10 +12 V
9 N.C.
10 +5 V sb
11 +12 V
12 +3.3 V
13 +3.3 V
14 -12 V
15 COM
16 PS_ON
17 COM
18 COM
19 COM
20 N.C.
21 +5 V
22 +5 V
23 +5 V
24 COM
USB
PIN No.
Function
1 V BUS
2 D–
3 D+
4 COM
BATT
PIN No.
Function
1 Batt +
2 Charge Cont.
3 Batt -
For Microsoft operating systems from Windows® 2000 onwards the UPS can be switched off via the APM function which has to be activated
in the PC-BIOS.
Optional accessory
Article No.
BP-2423N
BP-2425N
RBS02A-P24/2.3L
BS10A-H24/2.0L
RUPS 2000-B1
ENSP3-USB-INT
ENSP3-REBOOT
Windows® is a trademark of the Microsoft Corp.
Description
Battery pack with lead-batteries 24 V / 2.3 Ah
CYCLON battery pack, 24 V / 2.5 Ah / 5 1/4“ format
Battery pack with lead-batteries, removable (clip-on frame)
Battery pack with NiMH-batteries 24 V / 2.0 Ah
UPS-Management-Software (CD-ROM)
Internal USB interface holder
Automatic startup PC board
129

Industrial PC power supplies
UPS function
BP-2423N
24V / 2.3 Ah
Battery pack for eNSP3-450P series
Maintenance-free lead battery
“Plug and Play“ installation in 5.25“ drive slot
The BP-2423N batterypack feeds UPS PC power supply units of
the eNSP3-450P-xx series with energy. Very compact, it is intended
to be installed into a 5.25“ drive slot.
The connection between the batterypack and the UPS PC power
supply unitis made through a connector equipped with a protection
fuse. The lead batteries are free of maintenance.
Te c h n i c a l d a t a
Voltage
24 V DC
Capacitance
2.3 Ah
Number of batteries 2
Type of battery
Maintenance-free lead battery, 12 V
Backup time of a typical PC
300 W app. 2 minutes, 150 W app. 6 minutes
Fuse
30 A
Connector
JST, VL series
Operating temperature 0…+40 °C
Storage temperature -20…+50 °C
Dimensions
191 x 145 x 41,5 mm ±0.5mm
Weight (net)
2.7 kg
Drawing BP-2423N
BATT
PIN No.
Function
1 Batt +
2 N.C.
3 Batt -
Tolerance ±0.5 mm
During storage the battery pack should be recharged
every 6 months.
130

Industrial PC power supplies
RBS02A-P24/2.3L
24 V / 2.3 Ah
Battery pack for eNSP3-450P series
Maintenance-free lead battery, in clip-on frame
“Plug and Play“ installation in 5.25“ drive slot
UPS function
The RBS02A-P24/2.3L battery pack feeds UPS PC power supply
units of the eNSP3-450P-xx series with energy. Very compact, it is
intended to be installed into a 5.25“ drive slot.
The connection between the battery pack and the UPS PC power
supply unit is made through a connector equipped with a protection
fuse. The lead batteries are free of maintenance.
Te c h n i c a l d a t a
Voltage
24 V DC
Capacitance
2.3 Ah
Number of batteries 2
Type of battery
Maintenance-free lead battery, 12 V
Backup time of a typical PC
300 W app. 2 minutes, 150 W app. 6 minutes
Fuse
30 A internal
Connector
JST, VL series
Operating temperature 0…+40 °C
Storage temperature -20…+50 °C
Dimensions
149 x 245 x 42 mm ±0.5mm
Weight (net)
3.5 kg
Drawing RBS02A-P24/2.3L
BATT
PIN No.
Function
1 Batt +
2 N.C.
3 Batt -
During storage the battery pack should be recharged
every 6 months.
Tolerance ±0.5 mm
131

Industrial PC power supplies
UPS function
BS10A-H24/2.0L
24 V / 2.0 Ah
Battery pack for eNSP3-450P series
NiMH battery
“Plug and Play“ installation into 5.25“ drive slot
The BS10A-H24/2.0L battery pack supplies UPS PC power supply
units of the eNSP3-450P-xx series with energy. Based on NiMH
technology, it provides a longer back-up time and is lighter than
lead based battery packs. Very compact, it is intended to be
installed into 5.25“ drive slot.
The connection between the battery pack and the UPS PC power
supply unit is made through a connector equipped with a protection
fuse. The battery pack is free of maintenance.
Te c h n i c a l d a t a
Voltage
Capacitance
Battery type
Backup time of a typical PC
Fuse
Connector
Charge current
Operating temperature
Storage temperature
Dimensions
Weight (net)
24 V DC
2.0 Ah
NiMH battery
300 W app. 3.5 minutes, 150 W app. 9 minutes (410 W max.)
30 A
JST, VL series
0,2 A (15 hmax), internal charger
0…+45 °C, the additional heatingcan be switched on from +15 °C onwards
-20…+30 °C, storage possible one year or less
-20…+40 °C, storage possible 90 days or less
-20…+50 °C, storage possible 30 days or less
200 x 146 x 37 mm ±0.5 mm
1.8 kg
Drawing BS10A-H24/2.0L
BATT
PIN No.
1 24 V
2 CNT
3 0 V
Function
In case of a daily discharge the service life is 2.5 years, in
case of 5 discharges per year it is 3 to 4 years (measured
at 200 Watt load and with 3-minutes discharge)
The storaged batteries have to be charged every 3 months
(+40 °C) and every 6 months (+25 °C). Tolerance ±0.5 mm
132

Industrial PC power supplies
BP-2425N
24 V / 2.5 Ah
Temperature range from 0…+60 °C
Battery pack for eNSP3-450P series
Service life up to 10 years
UPS function
The battery pack BP-2425N serves to store energy for the UPS
PC power supplies eNSP3-450P-RS and eNSP3-450P-USB. It is
the optimal solution when a long service life of the battery pack
is required at rather high ambient operating temperatures. The
equipped CYCLON cells are based on a special lead-tin alloy
which results in a service life of up to 10 years in stand-by mode.
Due to its low self-discharge a fully charged battery pack can be
stored for up to 1 year.
Te c h n i c a l d a t a
Nominal voltage
24 V DC
Capacity
2.5 Ah
Number of batteries
12 cells with 2 V each
Type of battery
Maintenance-free lead-tin battery
Discharge cycles
10 000…300 depending on temperature, charge, and discharge
Fuse
30 A
Connector
JST, VL series
Operating temperature 0…+60 °C
Storage temperature -30…+70 °C
Dimensions
144 x 218 x 41 ±0.5 mm
Weight (net)
2.7 kg
Backup time until battery discharge voltage is 17 V DC, measured at +20 °C
Time approx. 1 min 10 sec. 4 min 20 sec. 11 min 24 min
Power (load at power supply output) 350 W 200 W 100 W 50 W
Drawing BP-2425N
BATT
PIN No.
Function
1 Batt +
2 N.C.
3 Batt -
The storaged batteries have to be charged every 6 months
(+25 °C) Bei Einlagerung ist der Batteriepack spätestens alle 6
Monate (25 °C) zu laden.
Tolerance: ±0.5 mm
133

Industrial PC power supplies
UPS function
RUPS 2000-B1
UPS management software
Easy to use
Easy to install
Open collector interface
The UPS management software RUPS 2000 OEM is the means
of communication between UPS and PC. Users can monitor the
input voltage and individually adjust the shutdown function.
Also, this software serves to define the PC and then to switch
off the UPS.
Te c h n i c a l d a t a
This article consists of the following component:
CD-ROM with series number on cover
This software supports the following operating systems:
Novell NetWare®
Windows® 3.x / 95 / 98 / NT / ME / 2000 / 2003 / XP / Vista / 7
Linux
LAN Manager
IBM Lan Server
Artisoft LANtastic
Windows® is a registered trademark of Microsoft Corp.
NetWare® is a registered trademark of Novell.
134

Industrial PC power supplies
Accessories
For Industrial PC power supplies
For your industrial PCs we will be glad to supply appropriate
accessories such as mounting screws, sets of safety clips, ATX
extensions or adapters!
All parts are available from stock, also in larger quantities.
Accessories
BEP-510-COVER
Cover for BEP-510
Incl. Mounting screws
Packing unit (PU): 1 piece
BEP-510C/Filter B
EMC filter
EN55022 class B for DC power supply BEP-510C
Packing unit (PU): 1 piece
BEP-520H-COVER
Cover for BEP-520H
Incl. Mounting screws
Packing unit (PU): 1 piece
CB-506
ATX cable harness
For BEP-506 / BEP-506C / BEP-506M
Packing unit (PU): 1 piece
135

Industrial PC power supplies
Accessories
CB-515
ATX cable harness
For BEP-515 / BEP-515C / BEP-515M
Packing unit (PU): 1 piece
CB-DC100W
ATX cable harness
For DC100W
Length 185 mm
Packing unit (PU): 1 piece
CB-PCFD
DC input cable harness
For PCFD-180P-X2S
600 mm, AWG 18, ends open
Packing unit (PU): 1 piece
CB-PCFL
AC input cable harness
For PCFL-180P-X2S2
600 mm, AWG 18, ends open
Packing unit (PU): 1 piece
ENSP3-REBOOT
Automatc startup PC board
For eNSP3-450P-RS / eNSP3-450P-USB / eNSP-3000P-RS
Packing unit (PU): 1 piece
136

Industrial PC power supplies
ENSP3-RS-INT
Interface holder
For eNSP3-450P-RS
Internal RS232 interface holder
Packing unit (PU): 1 piece
Accessories
ENSP3-USB-INT
Interface holder
For eNSP3-450P-USB
Internal USB interface holder
Packing unit (PU): 1 piece
WH-02VH02VH-250
Battery connector cable
For BS17A-H24/2.0L
Length 250 mm
Packing unit (PU): 1 piece
WH-M2022-500-01
20 pin ATX connector
For PCFD-180P-X2S / PCFL-180P-X2S2
Length 500 mm
Packing unit (PU): 1 piece
WH-PS610-850
Cable harness
For PCFD-180P-X2S / PCFL-180P-X2S2
3x HD, 2x SATA, 1x FDD
Packing unit (PU): 1 piece
137

Industrial PC power supplies
Accessories
WH-S1004-500-02
Interface cable
For BS17A-H24/2.0L
RS232, length 500 mm
Packing unit (PU): 1 piece
X1-007
P4 Adapter
For feeding in the +12 V voltage from the HDD to the
P4 connector of the mainboard
Packing unit (PU): 1 piece
X1-012
Mains supply IEC-320
For feeding in the mains voltage via an IEC-320 female connector
(rubber connection), L/N cable with double-insulation, 105 °C,
AWG18, 10 A / 250 V~, length approx. 500 mm
Packing unit (PU): 1 piece
X1-021
ATX Extension
For extending the 20-pole ATX connector
Length approx. 300 mm
Packing unit (PU): 1 piece
X1-024
AC input cable harness
2 poles, AWG 18, ends open
Packing unit (PU): 1 piece
138

Industrial PC power supplies
X1-040
Set of retaining clips for IEC connectors,
long (35 mm)
For preventing rubber connector from slipping out:
Wire bracket, 2x hexagon head bolt M3, screw nuts M3, washer
Packing unit (PU): 1 piece
Accessories
X1-053
Set of retaining clips for IEC connector,
short (27 mm)
For preventing rubber connector from slipping out:
Wire bracket, 2x hexagon head bolt M3
Packing unit (PU): 1 piece
X1-085
Mounting screws for PC power supplies
Phillips-recessed-head/hexagonal with washer, steel, nickel-plated,
Thread 6-32 UNC
Packing unit (PU): 2000 pcs
X1-086
Flat head screws for PC power supplies
Recessed countersunk flat head screw 100-110°, steel,
nickel-plated, Thread 6-32 UNC
Packing unit (PU): 2000 pcs
X1-114
EPS 24/ATX 20 Adapter
For supplying ATX mainboards with 20-pole connection from
24-pole EPS connector of PC PSU, length approx. 100mm
Packing unit (PU): 1 piece
139

Industrial PC power supplies
Accessories
X1-115
ATX/AT Adapter
ATX /AT Adapter with cables for power switch, ATX 20 pin to P6,
P8, P9 and P18
Packing unit (PU): 1 piece
X1-116
ATX 20/AT Adapter
For supplying AT mainboards with P8/P9 connection from
20-pole ATX connector of PC PSU, length approx. 100mm
Packing unit (PU): 1 piece
X1-132
Power cord
With shockproof plug-/rubber connector
Length 1800 mm
Packing unit (PU): 1 piece
X1-135
Power cord
Standardised European plug/IEC-320-C7
2x 0,75 mm 2 , Length 1800 mm
Packing unit (PU): 1 piece
140

Challenges are here
to be solved!
You need a power supply with special requirements for an unusual application?
Or you have a clear conception but still require advice?
Each and every system resembles a puzzle made from 1000 parts.
If you don’t want the power supply to become the problem part in your big puzzle,
simply talk to us well beforehand.
We are always at your service – with words and deeds.