Industrial PC power supplies

Industrial PC power supplies
UPS function
BS10A-H24/2.0L
24 V / 2.0 Ah
Battery pack for eNSP3-450P series
NiMH battery
“Plug and Play“ installation into 5.25“ drive slot
The BS10A-H24/2.0L battery pack supplies UPS PC power supply
units of the eNSP3-450P-xx series with energy. Based on NiMH
technology, it provides a longer back-up time and is lighter than
lead based battery packs. Very compact, it is intended to be
installed into 5.25“ drive slot.
The connection between the battery pack and the UPS PC power
supply unit is made through a connector equipped with a protection
fuse. The battery pack is free of maintenance.
Te c h n i c a l d a t a
Voltage
Capacitance
Battery type
Backup time of a typical PC
Fuse
Connector
Charge current
Operating temperature
Storage temperature
Dimensions
Weight (net)
24 V DC
2.0 Ah
NiMH battery
300 W app. 3.5 minutes, 150 W app. 9 minutes (410 W max.)
30 A
JST, VL series
0,2 A (15 hmax), internal charger
0…+45 °C, the additional heatingcan be switched on from +15 °C onwards
-20…+30 °C, storage possible one year or less
-20…+40 °C, storage possible 90 days or less
-20…+50 °C, storage possible 30 days or less
200 x 146 x 37 mm ±0.5 mm
1.8 kg
Drawing BS10A-H24/2.0L
BATT
PIN No.
1 24 V
2 CNT
3 0 V
Function
In case of a daily discharge the service life is 2.5 years, in
case of 5 discharges per year it is 3 to 4 years (measured
at 200 Watt load and with 3-minutes discharge)
The storaged batteries have to be charged every 3 months
(+40 °C) and every 6 months (+25 °C). Tolerance ±0.5 mm
132