Ordering Information - Dental-Depot

Ordering Information
The Certain ® Internal Connection Implant System

OSSEOTITE ® Certain ® Implants
OSSEOTITE Certain
PREVAIL ®
P = Restorative Platform
D = Diameter
Straight
Collar
Expanded
Collar
Length 3/4/3mm(P) 4/3mm(P) 4/5/4mm(P) 5/4mm(P) 5/6/5mm(P)
8.5mm IIOS3485 IIOS4385 IIOS4585 IIOS5485 IIOS5685
10.0mm IIOS3410 IIOS4310 IIOS4510 IIOS5410 IIOS5610
11.5mm IIOS3411 IIOS4311 IIOS4511 IIOS5411 IIOS5611
13.0mm IIOS3413 IIOS4313 IIOS4513 IIOS5413 IIOS5613
15.0mm IIOS3415 IIOS4315 IIOS4515 IIOS5415 IIOS5615
Straight
Collar
Expanded
Collar
OSSEOTITE Parallel Walled
Certain
OSSEOTITE XP ®
(Expanded Platform)
Length 3.25mm(D) 4.0mm(D) 5.0mm(D) 6.0mm(D) 4/5mm(P) 5/6mm(P)
8.5mm IOSM385 IOSS485 IOSS585 IOSS685 IOS4585 IOS5685
10.0mm IOSM310 IOSS410 IOSS510 IOSS610 IOS4510 IOS5610
11.5mm IOSM311 IOSS411 IOSS511 IOSS611 IOS4511 IOS5611
13.0mm IOSM313 IOSS413 IOSS513 IOSS613 IOS4513 IOS5613
15.0mm IOSM315 IOSS415 IOSS515 IOSS615 IOS4515 IOS5615
18.0mm IOSM318 IOSS418 N/A N/A N/A N/A
20.0mm N/A IOSS420 N/A N/A N/A N/A
Straight
Collar
Expanded
Collar
Full OSSEOTITE Parallel Walled
Full OSSEOTITE XP Certain
CertainLength 3.25mm(D) 4.0mm(D) 5.0mm(D) 6.0mm(D) 4/5mm(P) 5/6mm(P)
8.5mm IFOSM385 IFOS485 IFOS585 IFOS685 IFOS4585 IFOS5685
10.0mm IFOSM310 IFOS410 IFOS510 IFOS610 IFOS4510 IFOS5610
11.5mm IFOSM311 IFOS411 IFOS511 IFOS611 IFOS4511 IFOS5611
13.0mm IFOSM313 IFOS413 IFOS513 IFOS613 IFOS4513 IFOS5613
15.0mm IFOSM315 IFOS415 IFOS515 IFOS615 IFOS4515 IFOS5615
OSSEOTITE Tapered
Certain
8.5mm INT3285 INT485 INT585 INT685
10.0mm INT3210 INT410 INT510 INT610
11.5mm INT3211 INT411 INT511 INT611
13.0mm INT3213 INT413 INT513 INT613
15.0mm INT3215 INT415 INT515 INT615
3.25mm(D) 4.0mm(D) 5.0mm(D) 6.0mm(D)
Full OSSEOTITE Tapered
Certain
3.25mm(D) 4.0mm(D) 5.0mm(D) 6.0mm(D)
8.5mm IFNT3285 IFNT485 IFNT585 IFNT685
10.0mm IFNT3210 IFNT410 IFNT510 IFNT610
11.5mm IFNT3211 IFNT411 IFNT511 IFNT611
13.0mm IFNT3213 IFNT413 IFNT513 IFNT613
15.0mm IFNT3215 IFNT415 IFNT515 IFNT615
1

NanoTite Certain ® Implants
NanoTite Certain
PREVAIL ®
P = Restorative Platform
D = Diameter
Straight
Collar
Expanded
Collar
Length 3/4/3mm(P) 4/3mm(P) 4/5/4mm(P) 5/4mm(P) 5/6/5mm(P)
8.5mm NIIOS3485 NIIOS4385 NIIOS4585 NIIOS5485 NIIOS5685
10.0mm NIIOS3410 NIIOS4310 NIIOS4510 NIIOS5410 NIIOS5610
11.5mm NIIOS3411 NIIOS4311 NIIOS4511 NIIOS5411 NIIOS5611
13.0mm NIIOS3413 NIIOS4313 NIIOS4513 NIIOS5413 NIIOS5613
15.0mm NIIOS3415 NIIOS4315 NIIOS4515 NIIOS5415 NIIOS5615
NanoTite Parallel Walled
Certain
Length 3.25mm(D) 4.0mm(D) 5.0mm(D) 6.0mm(D)
8.5mm NIOSM385 NIOSS485 NIOSS585 NIOSS685
10.0mm NIOSM310 NIOSS410 NIOSS510 NIOSS610
11.5mm NIOSM311 NIOSS411 NIOSS511 NIOSS611
13.0mm NIOSM313 NIOSS413 NIOSS513 NIOSS613
15.0mm NIOSM315 NIOSS415 NIOSS515 NIOSS615
18.0mm NIOSM318 NIOSS418 N/A N/A
NanoTite Tapered
Certain 3.25mm(D) 4.0mm(D) 5.0mm(D) 6.0mm(D)
8.5mm NINT3285 NINT485 NINT585 NINT685
10.0mm NINT3210 NINT410 NINT510 NINT610
11.5mm NINT3211 NINT411 NINT511 NINT611
13.0mm NINT3213 NINT413 NINT513 NINT613
15.0mm NINT3215 NINT415 NINT515 NINT615
NanoTite Tapered Certain
PREVAIL
4/3mm(P) 5/4mm(P) 6/5mm(P)
8.5mm NIITP4385 NIITP5485 NIITP6585
10.0mm NIITP4310 NIITP5410 NIITP6510
11.5mm NIITP4311 NIITP5411 NIITP6511
13.0mm NIITP4313 NIITP5413 NIITP6513
15.0mm NIITP4315 NIITP5415 NIITP6515
Implant Cover Screws
Standard* IMMCS1 ICS375 ICS500 ICS600
Flat** IMCSF34 ICSF41 ICSF50 ICSF60
Headless N/A ICS275 ICS275 ICS275
*Implants include the corresponding Standard Cover Screw.
**PREVAIL Implants include the corresponding Flat Cover Screw.
2

Encode ® Two-Piece Healing Abutments
Dimensions Item #
3.4mm(D) 3.8mm(P) X 3.0mm(H)
IEHA343
3.8mm(P) X 4.0mm(H)
IEHA344
5.0mm(D)
3.8mm(P) X 6.0mm(H)
IEHA346
3.8mm(P) X 8.0mm(H)
IEHA348
5.0mm(P) X 3.0mm(H)
IEHA353
5.0mm(P) X 4.0mm(H)
IEHA354
5.0mm(P) X 6.0mm(H)
IEHA356
5.0mm(P) X 8.0mm(H)
IEHA358
4.1mm(D) 4.1mm(P) X 3.0mm(H) IEHA443
4.1mm(P) X 4.0mm(H)
IEHA444
4.1mm(P) X 6.0mm(H)
IEHA446
4.1mm(P) X 8.0mm(H)
IEHA448
5.0mm(P) X 3.0mm(H)
IEHA453
5.0mm(P) X 4.0mm(H)
IEHA454
6.0mm(D)
5.0mm(P) X 6.0mm(H)
IEHA456
5.0mm(P) X 8.0mm(H)
IEHA458
6.0mm(P) X 3.0mm(H)
IEHA463
6.0mm(P) X 4.0mm(H)
IEHA464
6.0mm(P) X 6.0mm(H)
IEHA466
6.0mm(P) X 8.0mm(H)
IEHA468
7.5mm(P) X 3.0mm(H)
IEHA473
7.5mm(P) X 4.0mm(H)
IEHA474
7.5mm(P) X 6.0mm(H)
IEHA476
7.5mm(P) X 8.0mm(H)
IEHA478
Dimensions Item #
5.6mm(P) X 3.0mm(H)
IEHA553
5.6mm(P) X 4.0mm(H)
IEHA554
5.6mm(P) X 6.0mm(H)
IEHA556
5.6mm(P) X 8.0mm(H)
IEHA558
6.0mm(P) X 3.0mm(H)
IEHA563
6.0mm(P) X 4.0mm(H)
IEHA564
6.0mm(P) X 6.0mm(H)
IEHA566
6.0mm(P) X 8.0mm(H)
IEHA568
7.5mm(P) X 3.0mm(H)
IEHA573
7.5mm(P) X 4.0mm(H)
IEHA574
7.5mm(P) X 6.0mm(H)
IEHA576
7.5mm(P) X 8.0mm(H)
IEHA578
6.8mm(P) X 3.0mm(H)
6.8mm(P) X 4.0mm(H)
6.8mm(P) X 6.0mm(H)
6.8mm(P) X 8.0mm(H)
7.5mm(P) X 3.0mm(H)
7.5mm(P) X 4.0mm(H)
7.5mm(P) X 6.0mm(H)
7.5mm(P) X 8.0mm(H)
D = Diameter
P = Emergence Profile
H = Collar Height
IEHA663
IEHA664
IEHA666
IEHA668
IEHA673
IEHA674
IEHA676
IEHA678
Occlusal markings provide information to aid
in the design of patient specific abutments.
EP ® One-Piece Healing Abutments
Dimensions Item #
3.4mm(D) 3.4mm(P) X 2.0mm(H)
ISMHA32
3.4mm(P) X 3.0mm(H)
ISMHA33
3.4mm(P) X 4.0mm(H)
ISMHA34
3.4mm(P) X 6.0mm(H)
ISMHA36
3.8mm(P) X 2.0mm(H)
IMHA32
3.8mm(P) X 3.0mm(H)
IMHA33
3.8mm(P) X 4.0mm(H)
IMHA34
3.8mm(P) X 6.0mm(H)
IMHA36
4.1mm(D) 4.1mm(P) X 2.0mm(H) ISHA42
4.1mm(P) X 3.0mm(H)
ISHA43
4.1mm(P) X 4.0mm(H)
ISHA44
4.1mm(P) X 6.0mm(H)
ISHA46
4.1mm(P) X 8.0mm(H)
ISHA48
5.0mm(P) X 2.0mm(H)
ITHA52
5.0mm(P) X 3.0mm(H)
ITHA53
5.0mm(P) X 4.0mm(H)
ITHA54
5.0mm(P) X 6.0mm(H)
ITHA56
5.0mm(P) X 8.0mm(H)
ITHA58
6.0mm(P) X 3.0mm(H)
ITHA63
6.0mm(P) X 4.0mm(H)
ITHA64
6.0mm(P) X 6.0mm(H)
ITHA66
6.0mm(P) X 8.0mm(H)
ITHA68
7.5mm(P) X 3.0mm(H)
ITHA73
7.5mm(P) X 4.0mm(H)
ITHA74
7.5mm(P) X 6.0mm(H)
ITHA76
7.5mm(P) X 8.0mm(H)
ITHA78
EP (Emergence Profile)
Height
Restorative Platform
5.0mm(D)
6.0mm(D)
Dimensions Item #
5.0mm(P) X 2.0mm(H)
ISWHA52
5.0mm(P) X 3.0mm(H)
ISWHA53
5.0mm(P) X 4.0mm(H)
ISWHA54
5.0mm(P) X 6.0mm(H)
ISWHA56
5.0mm(P) X 8.0mm(H)
ISWHA58
5.6mm(P) X 2.0mm(H)
IWTH52
5.6mm(P) X 3.0mm(H)
IWTH53
5.6mm(P) X 4.0mm(H)
IWTH54
5.6mm(P) X 6.0mm(H)
IWTH56
5.6mm(P) X 8.0mm(H)
IWTH58
6.0mm(P) X 2.0mm(H)
IWTH562
6.0mm(P) X 3.0mm(H)
IWTH563
6.0mm(P) X 4.0mm(H)
IWTH564
6.0mm(P) X 6.0mm(H)
IWTH566
6.0mm(P) X 8.0mm(H)
IWTH568
7.5mm(P) X 2.0mm(H)
IWTH572
7.5mm(P) X 3.0mm(H)
IWTH573
7.5mm(P) X 4.0mm(H)
IWTH574
7.5mm(P) X 6.0mm(H)
IWTH576
7.5mm(P) X 8.0mm(H)
IWTH578
6.0mm(P) X 2.0mm(H)
ISWHA62
6.0mm(P) X 3.0mm(H)
ISWHA63
6.0mm(P) X 4.0mm(H)
ISWHA64
6.0mm(P) X 6.0mm(H)
ISWHA66
6.0mm(P) X 8.0mm(H)
ISWHA68
6.8mm(P) X 2.0mm(H)
IWTH62
6.8mm(P) X 3.0mm(H)
IWTH63
6.8mm(P) X 4.0mm(H)
IWTH64
6.8mm(P) X 6.0mm(H)
IWTH66
6.8mm(P) X 8.0mm(H)
IWTH68
7.5mm(P) X 2.0mm(H)
IWTH672
7.5mm(P) X 3.0mm(H)
IWTH673
7.5mm(P) X 4.0mm(H)
IWTH674
7.5mm(P) X 6.0mm(H)
IWTH676
7.5mm(P) X 8.0mm(H)
IWTH678
3

Implant Impression Copings
D = Diameter
P = Emergence Profile
H = Collar Height
Pick-Up Impression Coping
Twist Lock Impression Coping
Description Item # Description Item #
3.4mm(D)
4.1mm(D)
5.0mm(D)
6.0mm(D)
3.4mm(P)
IMIC30
3.8mm(P)
IMIC33
4.1mm(P)
IIIC41
4.1mm(P) (Non-Hexed) IIIC42
5.0mm(P)
IIIC12
6.0mm(P)
IIIC60
7.5mm(P)
IIIC75
5.0mm(P)
IWIP50
5.6mm(P)
IWIP55
6.0mm(P)
IWIP56
7.5mm(P)
IWIP57
6.0mm(P)
IWIP60
6.8mm(P)
IWIP66
7.5mm(P)
IWIP67
Laboratory Components
4.1mm(D) 4.1mm(P) IIIC44
5.0mm(P)
IIIC45
6.0mm(P)
IIIC46
7.5mm(P)
IIIC47
5.0mm(D) 5.0mm(P)
IWIT50
5.6mm(P)
IWIT55
6.0mm(P)
IWIT56
7.5mm(P)
IWIT57
6.0mm(D) 6.0mm(P)
IWIT60
6.8mm(P)
IWIT66
7.5mm(P)
IWIT67
Implant Laboratory Analog
3.4mm(D)
4.1mm(D)
5.0mm(D)
6.0mm(D)
IMMILA
IILA20
IILAW5
IILAW6
UCLA, Prep-Tite ® And ZiReal ® Polishing Protector
3.4mm(D)
4.1mm(D)
5.0mm(D)
6.0mm(D)
IPPMM1
IPPIA3
IPPIA5
IPPIA6
Provisional Restorations
PreFormance ® Post* Description Item # Item #
3.4mm(D)
Straight Pre-Angled (15°)
3.8mm(P) X 4.0mm(H) IMPFP34 IMPAPF34
3.8mm(P) X 6.0mm(H) IMPFP36 IMPAPF36
4.1mm(D)
5.0mm(D)
6.0mm(D)
5.0mm(P) X 4.0mm(H) IPFP454 IPAPF454
5.0mm(P) X 6.0mm(H) IPFP456 IPAPF456
5.0mm(P) X 4.0mm(H) IWPFP554 IPAPF554
5.0mm(P) X 6.0mm(H) IWPFP556 IPAPF556
6.0mm(P) X 4.0mm(H) IWPFP664 IPAPF664
6.0mm(P) X 6.0mm(H) IWPFP666 IPAPF666
PreFormance Temporary Cylinder*
Titanium Temporary Cylinder*
3.4mm(D)
4.1mm(D)
5.0mm(D)
6.0mm(D)
Hexed
IMPFTC34
IPFTC41
IWPFTC51
IWPFTC61
Non-Hexed
IMPFTC32
IPFTC42
IWPFTC52
IWPFTC62
3.4mm(D)
4.1mm(D)
5.0mm(D)
6.0mm(D)
Hexed
IMMTCS1
IITCS41
IWTCS51
IWTCS61
Non-Hexed
N/A
IIITCS42
IWTCS52
IWTCS62
*Includes Certain ® Titanium Hexed Screw
4

Cement-Retained Restorations
GingiHue ® Post
3.4mm(D)
D = Diameter
P = Emergence Profile
H = Collar Height
Description Item # Item #
Straight Pre-Angled (15°)
3.8mm(P) X 2.0mm(H) IMAP32G IMPAP32G
3.8mm(P) X 4.0mm(H) IMAP34G IMPAP34G
4.1mm(D)
5.0mm(D)
6.0mm(D)
5.0mm(P) X 2.0mm(H) IAPP452G IPAP452G
5.0mm(P) X 4.0mm(H) IAPP454G IPAP454G
6.0mm(P) X 2.0mm(H) IAPP462G IPAP462G
6.0mm(P) X 4.0mm(H) IAPP464G IPAP464G
7.5mm(P) X 2.0mm(H) IAPP472G IPAP472G
7.5mm(P) X 4.0mm(H) IAPP474G IPAP474G
5.0mm(P) X 2.0mm(H) IWPP552G IPAP552G
5.0mm(P) X 4.0mm(H) IWPP554G IPAP554G
6.0mm(P) X 2.0mm(H) IWPP562G IPAP562G
6.0mm(P) X 4.0mm(H) IWPP564G IPAP564G
7.5mm(P) X 2.0mm(H) IWPP572G IPAP572G
7.5mm(P) X 4.0mm(H) IWPP574G IPAP574G
6.0mm(P) X 2.0mm(H) IWPP662G IPAP662G
6.0mm(P) X 4.0mm(H) IWPP664G IPAP664G
7.5mm(P) X 2.0mm(H) IWPP672G IPAP672G
7.5mm(P) X 4.0mm(H) IWPP674G IPAP674G
ZiReal ® Post*
*GingiHue Posts do not include the screw. The final Gold-Tite ® Screw (IUNIHG) must be ordered separately.
4.1mm(D) 5.0mm(P) X 4.0mm(H) ICAP454
6.0mm(P) X 4.0mm(H)
ICAP464
5.0mm(D)
6.0mm(P) X 4.0mm(H)
IWCAP564
7.5mm(P) X 4.0mm(H)
IWCAP574
*All ZiReal Posts Include Certain ® ZiReal Gold-Tite Screw (IZSHG) and Certain ZiReal Titanium Try-In Screw (IZIRTS).
UCLA Abutment
3.4mm(D)
4.1mm(D)
5.0mm(D)
6.0mm(D)
Gold Hexed IMUCG1C*
Gold Non-Hexed (With Gold-Tite Large Diameter Screw) IMUCG2C
Gold Non-Hexed (With Ti Large Diameter Screw) IMUCG2T
Castable Non-Hexed (With Gold-Tite Large Diameter Screw) IMUCC2C
Castable Non-Hexed (With Gold-Tite Large Diameter Screw) IMUCC2T
Gold Hexed IGUCA1C*
Gold Non-Hexed (With Gold-Tite Large Diameter Screw) IGUCA2C
Gold Non-Hexed (With Ti Large Diameter Screw) IGUCA2T
Castable Non-Hexed (With Gold-Tite Large Diameter Screw) IUNAB2C
Castable Non-Hexed (With Ti Large Diameter Screw) IUNAB2T
Gold Hexed IWGA51C*
Gold Non-Hexed (With Gold-Tite Large Diameter Screw) IWGA52C
Gold Non-Hexed (With Ti Large Diameter Screw) IWGA52T
Castable Non-Hexed (With Gold-Tite Large Diameter Screw) IWPC52C
Castable Non-Hexed (With Ti Large Diameter Screw) IWPC52T
Gold Hexed IWGA61C*
Gold Non-Hexed (With Gold-Tite Large Diameter Screw) IWGA62C
Gold Non-Hexed (With Ti Large Diameter Screw) IWGA62T
Castable Non-Hexed (With Gold-Tite Large Diameter Screw) IWPC62C
Castable Non-Hexed (With Ti Large Diameter Screw) IWPC62T
*UCLA Hexed Abutments do not include the screw. The final Gold-Tite Screw (IUNIHG) or the Titanium Screw (IUNIHT) must be ordered separately.
5

Cement-Retained Restorations
Provide ® Abutment
post
profile
collar
D = Diameter
P = Emergence Profile
H = Collar Height
PH = Post Height
Description Abutment Only Placement Kit* Restorative Kit**
4.1mm(D) 1.0mm(H) X 4.8mm(P) X 4.0mm(PH) IPA4140 PAK4140 PRK484
2.0mm(H) X 4.8mm(P) X 4.0mm(PH) IPA4240 PAK4240 PRK484
3.0mm(H) X 4.8mm(P) X 4.0mm(PH) IPA4340 PAK4340 PRK484
4.0mm(H) X 4.8mm(P) X 4.0mm(PH) IPA4440 PAK4440 PRK484
1.0mm(H) X 4.8mm(P) X 5.5mm(PH) IPA4155 PAK4155 PRK485
2.0mm(H) X 4.8mm(P) X 5.5mm(PH) IPA4255 PAK4255 PRK485
3.0mm(H) X 4.8mm(P) X 5.5mm(PH) IPA4355 PAK4355 PRK485
4.0mm(H) X 4.8mm(P) X 5.5mm(PH) IPA4455 PAK4455 PRK485
post
profile
collar
5.0mm(D)
1.0mm(H) X 6.5mm(P) X 4.0mm(PH) IPA5140 PAK5140 PRK654
2.0mm(H) X 6.5mm(P) X 4.0mm(PH) IPA5240 PAK5240 PRK654
3.0mm(H) X 6.5mm(P) X 4.0mm(PH) IPA5340 PAK5340 PRK654
4.0mm(H) X 6.5mm(P) X 4.0mm(PH) IPA5440 PAK5440 PRK654
1.0mm(H) X 6.5mm(P) X 5.5mm(PH) IPA5155 PAK5155 PRK655
2.0mm(H) X 6.5mm(P) X 5.5mm(PH) IPA5255 PAK5255 PRK655
3.0mm(H) X 6.5mm(P) X 5.5mm(PH) IPA5355 PAK5355 PRK655
4.0mm(H) X 6.5mm(P) X 5.5mm(PH) IPA5455 PAK5455 PRK655
post
profile
collar
6.0mm(D) 1.0mm(H) X 6.5mm(P) X 4.0mm(PH) IPA6140 PAK6140 PRK654
2.0mm(H) X 6.5mm(P) X 4.0mm(PH) IPA6240 PAK6240 PRK654
3.0mm(H) X 6.5mm(P) X 4.0mm(PH) IPA6340 PAK6340 PRK654
4.0mm(H) X 6.5mm(P) X 4.0mm(PH) IPA6440 PAK6440 PRK654
1.0mm(H) X 6.5mm(P) X 5.5mm(PH) IPA6155 PAK6155 PRK655
2.0mm(H) X 6.5mm(P) X 5.5mm(PH) IPA6255 PAK6255 PRK655
3.0mm(H) X 6.5mm(P) X 5.5mm(PH) IPA6355 PAK6355 PRK655
4.0mm(H) X 6.5mm(P) X 5.5mm(PH) IPA6455 PAK6455 PRK655
* Abutment Placement Kit includes Provide Abutment, Protection Cap and Certain ® Gold-Tite ® Hexed Screw (IUNIHG).
** Abutment Restorative Kit includes Impression Coping, Impression Coping w/Holes, Waxing Sleeve (single-unit), Waxing Sleeve
(multi-unit) and Non-Prepared Analog.
Provide Abutment Protection Cap
Description Item #
4.8mm(P) X 4.0mm(PH)
PPC484
4.8mm(P) X 5.5mm(PH)
PPC485
6.5mm(P) X 4.0mm(PH)
PPC654
6.5mm(P) X 5.5mm(PH)
PPC655
Provide Abutment Impression Coping (Unprepared)
Description Item #
4.8mm(P) X 4.0mm(PH)
PIC484
4.8mm(P) X 5.5mm(PH)
PIC485
6.5mm(P) X 4.0mm(PH)
PIC654
6.5mm(P) X 5.5mm(PH)
PIC655
Provide Abutment Impression Coping With Holes (Prepared)
Description Item #
4.8mm(P) X 4.0mm(PH)
PIC484H
4.8mm(P) X 5.5mm(PH)
PIC485H
6.5mm(P) X 4.0mm(PH)
PIC654H
6.5mm(P) X 5.5mm(PH)
PIC655H
Provide Abutment Analog W/Pin (Prepared)
Description Item #
4.8mm(P)
PAAP48
6.5mm(P)
PAAP65
Provide Abutment Waxing Sleeve
Description Item #
4.8mm(P) Single-Unit
PWS48S
4.8mm(P) Multi-Unit
PWS48M
6.5mm(P) Single-Unit
PWS65S
6.5mm(P) Multi-Unit
PWS65M
Provide Abutment Temporary Cylinder
Description Item #
4.8mm(P) Single-Unit
PUA48S
4.8mm(P) Multi-Unit
PUA48M
6.5mm(P) Single-Unit
PUA65S
6.5mm(P) Multi-Unit
PUA65M
Provide Abutment Analog (Unprepared)
Description Item #
4.8mm(P) X 4.0mm(PH)
PAA484
4.8mm(P) X 5.5mm(PH)
PAA485
6.5mm(P) X 4.0mm(PH)
PAA654
6.5mm(P) X 5.5mm(PH)
PAA655
6

Screw-Retained Restorations
D = Diameter
P = Emergence Profile
H = Collar Height
Conical Abutment
3.4mm(D)
4.1mm(D)
5.0mm(D)
6.0mm(D)
Description Item # (Straight) Item # (17º Pre-Angled) Item # (25º Pre-Angled)
3.4mm(P) X 1.0mm(H) IMCA31 N/A N/A
3.4mm(P) X 2.0mm(H) IMCA32 N/A N/A
3.4mm(P) X 3.0mm(H) IMCA33 N/A N/A
3.4mm(P) X 4.0mm(H) IMCA34 N/A N/A
5.0mm(P) X 1.0mm(H) ICA001 N/A N/A
5.0mm(P) X 2.0mm(H) ICA002 IAC4217 IAC4225
5.0mm(P) X 3.0mm(H) ICA003 N/A N/A
5.0mm(P) X 4.0mm(H) ICA004 IAC4417 IAC4425
5.0mm(P) X 5.5mm(H) ICA055 N/A N/A
5.0mm(P) X 1.0mm(H) IWCA51 N/A N/A
5.0mm(P) X 2.0mm(H) IWCA52 N/A N/A
5.0mm(P) X 3.0mm(H) IWCA53 N/A N/A
5.0mm(P) X 4.0mm(H) IWCA54 N/A N/A
5.0mm(P) X 5.5mm(H) IWCA55 N/A N/A
6.0mm(P) X 1.0mm(H) IWCA61* N/A N/A
6.0mm(P) X 2.0mm(H) IWCA62 N/A N/A
6.0mm(P) X 3.0mm(H) IWCA63 N/A N/A
6.0mm(P) X 4.0mm(H) IWCA64 N/A N/A
6.0mm(P) X 5.5mm(H) IWCA65 N/A N/A
*Requires Shorter Retaining Screw (GSH20).
Conical Abutment Pick-Up Impression Coping
3.4mm(D) 3.8mm(P) Single-Unit
4.1mm(D) 5.0mm(P) Single-Unit
5.0mm(D)
5.0mm(P) Multi-Unit
6.0mm(P) Single-Unit
6.0mm(P) Multi-Unit
7.5mm(P) Single-Unit
7.5mm(P) Multi-Unit
Item #
MEC33
CNRIC
CSQI7
CSQN6
CSQ06
CSQN7
CSQ07
6.0mm(D)
6.0mm(P) Single-Unit
6.0mm(P) Multi-Unit
7.5mm(P) Single-Unit
7.5mm(P) Multi-Unit
WCP661
WCP662
WCP671
WCP672
Conical Abutment Twist Lock Impression Coping
Item #
4.1mm(D) 5.0mm(P) Multi-Unit CIC55
5.0mm(D) 6.0mm(P) Multi-Unit
CIC56
7.5mm(P) Multi-Unit
CIC57
6.0mm(D)
6.0mm(P) Single-Unit
6.0mm(P) Multi-Unit
7.5mm(P) Single-Unit
7.5mm(P) Multi-Unit
WCT661
WCT662
WCT671
WCT672
7

Screw-Retained Restorations
D = Diameter
P = Emergence Profile
H = Collar Height
Conical Abutment Polishing Protector
3.4mm(D)
4.1mm(D)
5.0mm(D)
6.0mm(D)
Item #
PPMC1
PPCA3
PPCA3
WCPP6
Conical Abutment Temporary Cylinder*
3.4mm(D) Single-Unit
Multi-Unit
4.1mm(D) Single-Unit
5.0mm(D) Multi-Unit
Item #
MCTC1
MCTC2
CNC30
CC300
Conical Abutment Laboratory Analog
3.4mm(D)
MMCLA
6.0mm(D)
6.0mm(P) Single-Unit
6.0mm(P) Multi-Unit
7.5mm(P) Single-Unit
7.5mm(P) Multi-Unit
WCTC60
WCTC61
WCTC670
WCTC671
4.1mm(D)
5.0mm(D)
6.0mm(D)
CLA20
CLA20
WCLA6
*Requires Gold-Tite Retaining Screw.
Conical Abutment Healing Cap
3.4mm(D) 3.8mm(P)
MHC33
Conical Abutment Gold Cylinder*
3.4mm(D) Single-Unit
Multi-Unit
MCAG1
MCAG2
4.1mm(D)
5.0mm(D)
5.0mm(P)
6.0mm(P)
7.5mm(P)
CS250
CS260
CS270
4.1mm(D)
5.0mm(D)
Single-Unit
Multi-Unit
CNRG5
CAGC5
6.0mm(D)
6.0mm(P)
7.5mm(P)
WCS66
WCS67
6.0mm(D) Single-Unit
Multi-Unit
*Requires Gold-Tite ® Retaining Screw.
QuickBridge ® Provisional Components
CNRG6
CAGC6
Conical Abutment Castable Cylinder*
4.1mm(D) Single-Unit
5.0mm(D) Multi-Unit
*Requires Gold-Tite Retaining Screw.
CNRC5
CACC5
4.1mm(D)
5.0mm(D)
Cylinder And Cap
Cap
QKBRG
QBCAP
IOL ® Abutment
4.1mm(D) 4.5mm(P) X 2.0mm(H) IIOL20S
4.5mm(P) X 3.0mm(H) IIOL30S
4.5mm(P) X 4.0mm(H) IIOL40S
4.5mm(P) X 5.5mm(H) IIOL55S
4.5mm(P) X 7.0mm(H) IIOL70S
IOL Abutment Components
4.1mm(D) Pick-Up Impression Coping
Transfer Twist Lock
Impression Coping
Laboratory Analog
Temporary Cylinder
Gold Cylinder
Distal Extension
Healing Cap
Polishing Protector
IOLPIC
IOLTIC
IOLLAS
IOLTC
IOLGC
IOLDE
IOLHC
IOLPP
8

OverdentSURE Restorations
D = Diameter
H = Collar Height
LOCATOR ® Abutment*
3.4mm(D)
Description
1.0mm(H)
Item #
IMLOA001
2.0mm(H)
IMLOA002
3.0mm(H)
IMLOA003
4.0mm(H)
IMLOA004
5.0mm(H)
IMLOA005
6.0mm(H)
IMLOA006
4.1mm(D) 1.0mm(H) ILOA001
2.0mm(H)
ILOA002
3.0mm(H)
ILOA003
4.0mm(H)
ILOA004
5.0mm(H)
ILOA005
6.0mm(H)
ILOA006
Housing{
*Included with each abutment:
and Black
Processing
Male
{
{
{
Final Male
LOCATOR
Light
Retention
Male
White{
Extra Light
Retention
Male
Spacer Ring
LOCATOR Abutment
Components
Description Item #
Impression Coping (one time use)
LAIC1
Laboratory Analog
LALA1
Core Tool/Abutment Driver
LCTDR1
Driver Tip 24.0mm/30.0mm
LOADT4/LOADT9
Replacement Housing Kit
LORHK
Extended Range Males (4-pack) - Green
LAERM
Extra Light Retention Males (4-pack) - Blue
LAELM
Light Retention Replacement Males (4-pack) - Pink LLRMS
Replacement Males (4-pack) - White
LARMS
Extra Light Retention Extended Range Males - Red LELARM
Replacement Housing
LOAH
1.25mm .050in. Driver Tip 24.0mm(L) - used with LCTDR1 RASH4
1.25mm .050in. Driver Tip 30.0mm(L) - used with LCTDR1 RASH9
Male Extraction Tool
LOA8397**
**Part of the Core Tool/Abutment Driver LCTDR1.
Standard Abutment
Description Item #
4.1mm(D) 2.0mm(H) IAB200
3.0mm(H)
IAB300
4.0mm(H)
IAB400
5.5mm(H)
IAB550
7.0mm(H)
IAB700
Standard Abutment
Components
Description Item #
Healing Cap
TS250
Pick-Up Impression Coping
SQIC7
Twist Lock Impression Coping
SIC70
Laboratory Analog
SLA20
Gold Cylinder
SGC30***
Castable Gold Cylinder
SGC34***
Temporary Cylinder
TC300
Polishing Protector
PPSA3
Chamfered Gold Cylinder
CGC30***
***Requires Gold-Tite ® Retaining Screw.
9

Screws
Retaining Screws And Waxing Screws
(Conical, IOL ® , Standard)
2.0mm Gold-Tite ® Hexed Retaining Screw
3.0mm Gold-Tite Hexed Retaining Screw
7.0mm Gold-Tite Hexed Retaining Screw
3.0mm Titanium Hexed Retaining Screw
10.0mm Waxing Screw/Guide Pin - Knurled
15.0mm Waxing Screw/Guide Pin - Knurled
PSKT Surgical Kit - Parallel Walled Implants
GSH20
GSH30
GSH70
TSH30
WSK10
WSK15
Abutment Screws (UCLA, GingiHue ® , Provide ® , ZiReal ® )
Surgical Kits
Gold-Tite Hexed Screw
Titanium Hexed Screw
Gold-Tite Hexed Large Diameter Screw
Titanium Hexed Large Diameter Screw
ZiReal Gold-Tite Hexed Screw
Item # Try-In And Impression Coping Screws
Item #
IUNIHG
IUNIHT
ILRGHG
ILRGHT
IZSHG
Hex Try-In Screw - 5-pack
Knurled Implant Waxing Screw/Guide Pin
Twist Lock Coping Screw
*Only for GingiHue Posts, Hexed UCLA Abutments and Hexed
Titanium Temporary Cylinders.
Narrow Posterior Large Hex Driver 17.0mm
Narrow Standard Large Hex Driver 24.0mm
Posterior Abutment Driver 17.0mm
Posterior Abutment Driver 24.0mm
Manual Interchangeable Driver Tip Handle
Twist Lock Coping Driver
Laboratory Abutment Holder (all diameters)
Certain ® QuickSeat ® Activator Tool
Screw Removal Kit
Narrow Right Angle Hex Driver Tip 24.0mm
Narrow Right Angle Hex Driver Tip 30.0mm
Right Angle Abutment Driver Tip - Steel
QNTSK Surgical Kit - Tapered Implants
IUNITS*
IWSU30
IWITSC
Drivers, Driver Tips And Misc. Items
PHD02N
PHD03N
PAD00
PAD24
MIDTH
ICD00
ILTAH57
IQSA01
ISRT10
RASH3N
RASH8N
RASA3
PSKT Surgical Kit Contents - Parallel Walled Implants
Description
Item #
ACT ® Twist Drill 2.0mm X 10.0mm
ACT Twist Drill 2.0mm X 15.0mm
ACT Twist Drill 2.0mm X 20.0mm
ACT Twist Drill 2.75mm X 10.0mm
ACT Twist Drill 2.75mm X 15.0mm
ACT Twist Drill 2.75mm X 20.0mm
ACT Twist Drill 3.0mm X 10.0mm
ACT Twist Drill 3.0mm X 15.0mm
ACT Twist Drill 3.0mm X 20.0mm
ACT Twist Drill 3.25mm X 10.0mm
ACT Twist Drill 3.25mm X 15.0mm
ACT Twist Drill 3.25mm X 20.0mm
ACT Twist Drill 3.85mm X 10.0mm
ACT Twist Drill 3.85mm X 15.0mm
ACT Twist Drill 3.85mm X 20.0mm
ACT Twist Drill 4.25mm X 13.0mm
ACT Twist Drill 4.25mm X 18.0mm
ACT Twist Drill 4.25mm X 8.5mm
ACT Twist Drill 4.85mm X 13.0mm
ACT Twist Drill 4.85mm X 18.0mm
ACT Twist Drill 4.85mm X 8.5mm
ACT Twist Drill 5.25mm X 13.0mm
ACT Twist Drill 5.25mm X 18.0mm
ACT Twist Drill 5.25mm X 8.5mm
Drill Extension
Countersink Depth Indicator For ICD100
Countersink Depth Indicator For CD4500
Countersink Depth Indicator For CD5600
Countersink Drill 4.0mm (Ext. Connection)
Countersink Drill for OSSEOTITE XP ® 4.0/5.0mm
Pilot/Countersink Drill 5.0mm
ACT2010
ACT2015
ACT2020
ACT2710
ACT2715
ACT2720
ACT3010
ACT3015
ACT3020
ACT3210
ACT3215
ACT3220
ACT3810
ACT3815
ACT3820
ACT4213
ACT4218
ACT4285
ACT4813
ACT4818
ACT4885
ACT5213
ACT5218
ACT5285
ACTDE
CDI100
CDI4500
CDI5600
CD100
CD4500
CD500
PSKT40 PSKT35 PSKT01
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Description Item #
Countersink Drill for OSSEOTITE XP 5.0/6.0mm CD5600
Pilot/Countersink Drill 6.0mm
CD600
Open End Wrench
CW100
Direction Indicator 2.0mm X 10.0mm - 3ea. DI100
Implant Depth Gauge
DP020
Certain Countersink Drill 4.0mm
ICD100
Certain Implant Driver Tip - Short
IIPDTS
Certain Implant Driver Tip - Long
IIPDTL
Certain Implant Driver Tip 3.4mm(D) - Short IMPDTS
Certain Implant Driver Tip 3.4mm(D) - Long IMPDTL
Certain Ratchet Ext. Driver 3.4mm(D) - Short IMRE100
Certain Ratchet Ext. Driver 3.4mm(D) - Long IMRE200
Certain Ratchet Extension Driver 6.0mm(L) IRE100
Certain Ratchet Extension Driver 15.0mm(L) IRE200
Driver Tip Replacement O-Rings - 10 pack IRORDR
Handpiece Connector
MDR10
Mount 3.4mm(D) X 15.0mm(L)
MMC15
Tap 3.25mm(D) X 18.0mm(L)
MTAP2
Pilot Drill 2.0/3.0mm
PD100
Narrow Small Hex Hand Driver
PHD00N
Narrow Large Hex Hand Driver
PHD02N
Plastic Organizer Tray
PTT100
Plastic Surgical Tray
PTT300I
Narrow Large Hex Driver Tip
RASH3N
Round Drill
RD100
Ratchet Extension 6.0mm
RE100
Ratchet Extension 15.0mm
RE200
Tap 4.0mm X 13.0mm
TAP413
Tap 5.0mm X 13.0mm
TAP53S
Tap 6.0mm X 13.0mm
TAP63S
Ratchet Wrench
WR150
PSKT40 PSKT35 PSKT01
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
10

QNTSK40 And QNTSK20 Surgical Kit Contents - Tapered Implants
Description Item # QNTSK40 QNTSK20 Description Item # QNTSK40 QNTSK20
ACT ® Twist Drill 2.0mm X 10.0mm
ACT2010
ACT Twist Drill 2.0mm X 15.0mm
ACT2015
ACT Twist Drill 2.0mm X 20.0mm
ACT2020
Drill Extension
ACTDE
ACT Pointed Starting Drill
ACTPSD
Open End Wrench
CW100
Direction Indicator 2.0mm X 10.0mm - 3 each DI100
Certain ® Countersink Drill 4.0mm Implant
ICD100
Certain Implant Driver Tip - Short
IIPDTS
Certain Implant Driver Tip - Long
IIPDTL
Certain Driver Tip 3.4mm(D) - Short
IMPDTS
Certain Driver Tip 3.4mm(D) - Long
IMPDTL
Certain Ratchet Ext. Driver 3.4mm(D) - Short IMRE100
Certain Ratchet Ext. Driver 3.4mm(D) - Long
IMRE200
Certain Ratchet Extension Driver 6.0mm(L)
IRE100
Certain Ratchet Extension Driver 15.0mm(L) IRE200
Certain Driver Replacement O-Rings - 10-pack IRORDR
Handpiece Connector
MDR10
Implant Mount 3.4mm(D) X 15.0mm(L) (Ext. Connection) MMC15
Dense Bone Tap Kit
NTAPK
Depth Indicator 3.25mm X 10.0mm
NTDI3210
Depth Indicator 3.25mm X 11.5mm
NTDI3211
Depth Indicator 3.25mm X 13.0mm
NTDI3213
Depth Indicator 3.25mm X 15.0mm
NTDI3215
Depth Indicator 3.25mm X 8.5mm - 3 each
NTDI3285
Depth Indicator 4.0mm X 10.0mm
NTDI410
Depth Indicator 4.0mm X 11.5mm
NTDI411
Depth Indicator 4.0mm X 13.0mm
NTDI413
Depth Indicator 4.0mm X 15.0mm
NTDI415
Depth Indicator 4.0mm X 8.5mm - 3 each
NTDI485
Depth Indicator 5.0mm X 10.0mm
NTDI510
Depth Indicator 5.0mm X 11.5mm
NTDI511
Depth Indicator 5.0mm X 13.0mm
NTDI513
Depth Indicator 5.0mm X 15.0mm
NTDI515
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
*
•
•
•
•
•
•
•
•
•
Depth Indicator 5.0mm X 8.5mm - 3 each
Depth Indicator 6.0mm X 10.0mm
Depth Indicator 6.0mm X 11.5mm
Depth Indicator 6.0mm X 13.0mm
Depth Indicator 6.0mm X 15.0mm
Depth Indicator 6.0mm X 8.5mm - 3 each
Narrow Posterior Hexed Driver 17.0mm
Posterior Large Hexed Driver 17.0mm
Complete Quad Shaping Drill Tray
Quad-Shaping Drill 3.25mm X 10.0mm
Quad-Shaping Drill 3.25mm X 11.5mm
Quad-Shaping Drill 3.25mm X 13.0mm
Quad-Shaping Drill 3.25mm X 15.0mm
Quad-Shaping Drill 3.25mm X 8.5mm
Quad-Shaping Drill 4.0mm X 10.0mm
Quad-Shaping Drill 4.0mm X 11.5mm
Quad-Shaping Drill 4.0mm X 13.0mm
Quad-Shaping Drill 4.0mm X 15.0mm
Quad-Shaping Drill 4.0mm X 8.5mm
Quad-Shaping Drill 5.0mm X 10.0mm
Quad-Shaping Drill 5.0mm X 11.5mm
Quad-Shaping Drill 5.0mm X 13.0mm
Quad-Shaping Drill 5.0mm X 15.0mm
Quad-Shaping Drill 5.0mm X 8.5mm
Quad-Shaping Drill 6.0mm X 10.0mm
Quad-Shaping Drill 6.0mm X 11.5mm
Quad-Shaping Drill 6.0mm X 13.0mm
Quad-Shaping Drill 6.0mm X 15mm
Quad-Shaping Drill 6.0mm X 8.5mm
Narrow Right Angle Large Hexed Driver Tip 24.0mm
Ratchet Extension 6.0mm (Ext. Connection)
Ratchet Extension 15.0mm (Ext. Connection)
Ratchet Wrench
NTDI585
NTDI610
NTDI611
NTDI613
NTDI615
NTDI685
PHD00N
PHD02N
QNTSKT
QSD3210
QSD3211
QSD3213
QSD3215
QSD3285
QSD410
QSD411
QSD413
QSD415
QSD485
QSD510
QSD511
QSD513
QSD515
QSD585
QSD610
QSD611
QSD613
QSD615
QSD685
RASH3N
RE100
RE200
WR150
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
*Includes only bone tap sizes that correspond with the QSDs included in the kit.
Global Headquarters
4555 Riverside Drive
Palm Beach Gardens, FL 33410
1-800-342-5454
Outside The U.S.: +1-561-776-6700
Fax: +1-561-776-1272
www.biomet3i.com
Certain, Encode, EP, GingiHue, Gold-Tite, IOL, OSSEOTITE, OSSEOTITE XP, PreFormance, PREVAIL, Provide, QuickBridge and ZiReal are
registered trademarks and NanoTite and Twist Lock are trademarks of BIOMET 3i LLC. BIOMET is a registered trademark and BIOMET
3i and design are trademarks of BIOMET, Inc. ©2010 BIOMET 3i LLC. All rights reserved.
REV B 01/10