Screw-Retained Restorations - Com-Dental

Introduction
Patient Specific Restorations ® Overview
ARCHITECH PSR ®
Encode ® Impression System
The Encode Impression System eliminates the need for an
implant-level impression while delivering a Patient Specific
Restoration that has the appropriate margin height and
natural emergence contours for the patient.
This accuracy is achieved from an impression of the Encode
Healing Abutment. Codes embedded on the occlusal surface
of the Encode Healing Abutment communicate the collar
height, implant hex-orientation, platform diameter and
interface (the Certain ® Internal Connection or External Hex
Connection) of the implant. Because the tissue is healed at
the time of impression, the margin is designed to have the
appropriate placement and contour. The result is a patient
specific, anatomically designed, final Encode Abutment.
Available in titanium, titanium nitride coating and zirconia.
CAM StructSURE ® Precision Milled Bars
And Frameworks
CAM StructSURE Precision Milled Bars are created with the
technology to achieve a truly passive fit. These are available
in Hader and Dolder ® Designs for overdenture bars, primary
bars and in fixed hybrid designs. This technology does not
require any wax or resin design from the technician. The
bars can be made on most major dental implants and
abutments. Because these are milled from one solid piece of
lightweight titanium, the potential for weakness caused by
soldering or laser welded joints is eliminated. You receive a
completed superstructure ready for prosthesis processing.
No polishing or retention creation necessary. BIOMET 3i can
even tap holes for attachments.
Copy Milled Bars are also available for those who prefer to
design a bar or framework in resin pattern to the patient’s
specifications.
Note: Please ensure that as many implants as necessary are
used for a fully stable restoration.
v