Screw-Retained Restorations - Com-Dental

Ordering Information
Some products may not be available outside the U.S.A.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.
To Place an Order:
Contact your local BIOMET 3i, Inc. Representative or call:
BIOMET 3i, Inc. Customer Service
Monday–Thursday 8am–8pm (EST)
Friday 8am–6:30pm (EST)
800-342-5454 Fax 561-776-1272
In Canada: 800-363-1980 Outside US: 561-776-6700
TERMS AND CONDITIONS OF SALE. The following are the terms and
conditions by which BIOMET 3i, Inc. sells its products.
GOVERNING TERMS. Any shipment of products shall be deemed to be on the
terms and conditions stated herein. Any and all terms and conditions submitted by
Purchaser are hereby rejected.
TAXES. The prices set forth herein do not include any sales, use, excise, ad
valorem, property or other taxes applicable to the sale, use or delivery of the
products, all of which shall be paid by Purchaser separately or added to the
contract price and paid by Purchaser to BIOMET 3i, Inc.
PRICES. The prices set forth for the products are in United States Dollars.
DELIVERY. Products sold hereunder shall be delivered F.O.B. manufacturer’s plant
or distributor’s plant, as applicable. Purchaser shall assume responsibility for all
subsequent delivery or shipping charges.
PAYMENT. Payment terms shall be as set forth under the “Terms” section on front
of invoice.
WARRANTY. EXCEPT AS EXPRESSLY SET FORTH IN THE “BIOMET 3i, INC. FIVE
YEAR WARRANTY PROGRAM,” NEITHER BIOMET 3i, INC. NOR ANY OF ITS
AFFILIATES MAKE ANY WARRANTY, EXPRESS OR IMPLIED, EXCEPT THAT ITS
PRODUCTS SHALL BE FREE FROM DEFECTS IN MATERIAL AND/OR
WORKMANSHIP. THIS WARRANTY APPLIES ONLY TO THE ORIGINAL
PURCHASER. IN THE EVENT OF A PRODUCT DEFECT, IMMEDIATELY NOTIFY
BIOMET 3i, INC. OF THE DEFECT PRIOR TO RETURNING THE PRODUCT. DEVICES
SHALL BE STERILIZED PRIOR TO RETURN. AS ITS SOLE OBLIGATION AND AS
PURCHASER’S SOLE REMEDY UNDER THIS WARRANTY, BIOMET 3i, INC. WILL,
AT ITS OPTION, EITHER REPAIR, REPLACE OR ISSUE CREDIT FOR SUCH
PRODUCTS. PURCHASER ASSUMES ALL RISKS AND LIABILITY RESULTING
FROM THE USE OF THESE PRODUCTS, WHETHER USED SEPARATELY OR IN
COMBINATION WITH OTHER PRODUCTS.
EXCEPT FOR THE WARRANTY EXPRESSLY DESCRIBED IN “WARRANTY”
PARAGRAPH ABOVE, NEITHER BIOMET 3i, INC. NOR ANY OF ITS AFFILIATES
MAKES ANY OTHER WARRANTY WITH RESPECT TO THE BIOMET 3i, INC.
PRODUCTS, EXPRESSED OR IMPLIED, WRITTEN OR ORAL, INCLUDING,
WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR A
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.
EDUCATION; MODIFICATION OF PRODUCTS. BIOMET 3i, Inc. strongly
recommends completion of formal post graduate implant education and strict
adherence to the procedures described in BIOMET 3i, Inc.’s Implant Instruction
Manuals. BIOMET 3i, Inc. continually strives to improve its products and therefore
reserves the right to improve, modify or discontinue products at any time, or to
change specifications of the products without notice and without incurring any
obligation.
RETURN POLICY. A Purchaser may return any BIOMET 3i, Inc. Product within
90 days of the invoice date. BIOMET 3i, Inc. Products returned within 60 days of
the invoice date will be accepted without any re-stocking fee to the Purchaser.
BIOMET 3i, Inc. Products returned between 61 and 90 days of the invoice date will
be subject to a 15% restocking fee. A BIOMET 3i, Inc. Product will be accepted for
return only if the BIOMET 3i, Inc. Product is (1) returned in its original, unopened
package (including autoclavable products); (2) received by BIOMET 3i, Inc. within
90 days after the invoice date for that product; and (3) returned freight prepaid to
4555 Riverside Drive, Palm Beach Gardens, Florida 33410, (Attention: Returns
Department) accompanied by the BIOMET 3i, Inc. Return authorization number
provided by BIOMET 3i, Inc.’s Customer Service Department. Purchaser should be
advised that BIOMET 3i, Inc. Products not meeting the above criteria will not be
accepted for return.
EXCHANGE POLICY. BIOMET 3i, Inc. Products may be exchanged within 180
days of the invoice date, without a re-stocking fee, for other BIOMET 3i, Inc.
Products of equal or lesser value within the same product family as determined by
BIOMET 3i, Inc. (ex. implant for implant, abutment for abutment, membrane for
membrane). BIOMET 3i, Inc. Products may be exchanged within 180 days of the
invoice date for other BIOMET 3i, Inc. Products of greater value within the same
product family as determined by BIOMET 3i, Inc. (ex. implant for implant, abutment
for abutment, membrane for membrane), with the price differential paid by the
Purchaser. In both cases, the exchanged BIOMET 3i, Inc. Product must be (1)
returned in its original, unopened package (including autoclavable products); (2) a
currently offered BIOMET 3i, Inc. Product (discontinued product not included); and
(3) returned freight prepaid to 4555 Riverside Drive, Palm Beach Gardens, Florida
33410, (Attention: Returns Department) and accompanied by the BIOMET 3i, Inc.
Return Authorization Number provided by BIOMET 3i, Inc.’s Customer Service
Department.
LICENSES, PERMITS AND EXPORT CONTROL. The timely securing of
permits, licenses or other local, state or federal governmental approvals required in
connection with Purchaser’s use of any products hereunder shall be the sole
responsibility of Purchaser and Purchaser shall bear the cost thereof. Unless
otherwise agreed between BIOMET 3i, Inc. and Purchaser, products sold hereunder
are only for use in the United States. Purchaser agrees that the Purchaser will
comply fully with all applicable state and federal laws and regulations and
Purchaser shall indemnify BIOMET 3i, Inc. for all losses, damages and penalties
incurred as a result of any violation of applicable state or federal law or regulations.
The advertised devices may not have been licensed in accordance with Canadian
Law.
FORCE MAJEURE. BIOMET 3i, Inc. shall not be liable for any loss or damage
due to failure or delay arising out of any cause beyond the reasonable control of
BIOMET 3i, Inc. In the event of any failure or delay resulting from such causes, an
equitable adjustment of delivery and any other appropriate terms and conditions
shall be made. No such failure or delay shall be the basis for an increase in BIOMET
3i, Inc.’s obligations nor any termination by Purchaser.
LIMITATION OF LIABILITY. UNDER NO CIRCUMSTANCES SHALL BIOMET 3i,
INC. OR ANY OF ITS AFFILIATES BE LIABLE FOR BUSINESS INTERRUPTION, LOSS
OF PROFITS, SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES
OF ANY NATURE AND FROM ANY CAUSE WHETHER BASED IN CONTRACT,
WARRANTY OR TORT (INCLUDING NEGLIGENCE) OR OTHER LEGAL THEORY,
EVEN IF BIOMET 3i, INC. HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
VALIDITY. If any provision of these Terms and Conditions is found to be illegal or
unenforceable in any respect, such illegality or unenforceability shall not affect any
other provision of these Terms and Conditions, all of which shall remain
enforceable in accordance with their terms.
GENERAL PROVISIONS. The purchase of the products and these Terms and
Conditions are governed by the laws of Florida, without regard to conflicts of law
principles. This document incorporates all oral and written representations between
the parties and constitutes the entire agreement and understanding of the parties
with respect to the subject matter hereof and supercedes any and all other
agreements either oral or written between the parties with respect to such subject
matter. No amendment or modification may be made to this document unless in
writing and duly executed by an authorized representative of BIOMET 3i, Inc.
CAUTION. Federal (U.S.) Law restricts these devices to sale by or on the order of
a licensed healthcare practitioner. Devices labeled “STERILE” are certified to be
sterile unless sterile package is opened or damaged.
EXPORT ORDERS. Require advance payment or letter of credit. Shipments are
made either freight collect or paid by BIOMET 3i, Inc. and added to invoice. Unless
special instructions are received with the order, the shipping method will be
determined by BIOMET 3i, Inc., F.O.B. Palm Beach Gardens, FL.
TRADEMARKS. BIOMET 3i LLC. Registered Trademarks®: BIOMET 3i and
design, ACT, Advanced Cutting Technology, ARCHITECH PSR, Biogran, CAM
StructSURE, Certain, DIEM, Encode, EP, GingiHue, Gold-Tite, IOL, Miniplant,
Navigator, OSSEOCISION, OsseoGuard, OSSEOTITE, OSSEOTITE XP, PreFormance,
Prep-Tite, PREVAIL, Provide, QuickBridge, QuickSeat, RegenerOss and ZiReal are
registered trademarks of BIOMET 3i LLC.
BIOMET 3i LLC. Trademarks: BIOMET 3i, BIOMET 3i IDS, Gold Standard ZR, ICE,
NanoTite, Providing Solutions – One Patient At A Time and Twist Lock are
trademarks of BIOMET 3i LLC.
Biomet is a registered trademark of BIOMET, Inc. Calcigen is a trademark of
BIOMET, Inc. Dolder is a registered trademark of Prof. Eugen Dolder, formerly the
director of the School of Dentistry at the University of Zurich. Endobon is a
registered trademark of BIOMET Deutschland GmbH. LOCATOR is a registered
trademark of Zest Anchors, Inc. Safescraper is a registered trademark of CGM
S.p.A Divisione Medicale META.