NSI LOGO GUIDELINES - National Security Inspectorate
NSI LOGO GUIDELINES - National Security Inspectorate
NSI LOGO GUIDELINES - National Security Inspectorate
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
TM<br />
Exclusion zone & minimum size<br />
// Your guide to using the <strong>NSI</strong> logo on your promotional material<br />
It is important that all approved companies project our logo consistently and professionally,<br />
without variation. On this page we show the importance of leaving space around the logo.<br />
The exclusion zone<br />
This is the clear space around the logo in<br />
which nothing else should appear. It helps to<br />
ensure clarity and improve the impact of the<br />
logo. This clear space (X) is proportional and<br />
is defined by the height of the <strong>NSI</strong> dot.<br />
1.5X<br />
X<br />
X<br />
X<br />
X<br />
X<br />
20mm<br />
TM<br />
10mm<br />
GOLD<br />
The minimum size<br />
To ensure legibility the <strong>NSI</strong> certification logo<br />
should not be used smaller than 20mm height<br />
for the colour version or 10mm if using the<br />
mono version as shown.<br />
TM<br />
GOLD<br />
Minimum size for the<br />
colour version<br />
Minimum size for the<br />
Mono version<br />
NB. Be sure to use the smaller logo version<br />
when the height is less than 30mm<br />
X<br />
GOLD<br />
1.6<br />
<strong>NSI</strong> logo guidelines © <strong>National</strong> <strong>Security</strong> <strong>Inspectorate</strong> 2012 Issue 3