User Guide
User Guide
User Guide
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
R320 Receiver <strong>User</strong> <strong>Guide</strong><br />
Pole Mount<br />
The center thread of the antenna is 5/8 inches for compatibility with a survey<br />
pole (not included). Simply thread the pole into the antenna.<br />
Connecting the Cables<br />
When connecting the cables from the R320 ensure the following:<br />
• Power cable must reach an appropriate power source<br />
• Antenna cable must reach from the antenna to the R320 receiver<br />
• Data cable may connect to a data storage device, computer, or other<br />
device that accepts GPS data<br />
When choosing a route for all R320 cables keep the following in mind:<br />
• Avoid running cables in areas of excessive heat<br />
• Keep cables away from corrosive chemicals<br />
• Do not run the extension cable through door or window jams<br />
• Keep cables away from rotating machinery<br />
• Do not crimp or excessively bend the cables<br />
• Avoid placing tension on the cables<br />
• Remove unwanted slack from the extension cable at the receiver<br />
end<br />
• Secure along the cable route using plastic wraps<br />
Improperly installed cables near machinery can be dangerous.<br />
9
Change language