VITA veneering material - dentes.sk

VITA In-Ceram ® YZ for inLab ®
Pre-sintered blocks made from yttrium-stabilized zirconium oxide (Y-TZP)
Product description
VITA In-Ceram YZ - thanks to its outstanding material strength
(> 900 MPa) - enables the fabrication of delicate crown and
bridge structures with optimum marginal accuracy. VITA In-
Ceram YZ is considered as the “diamond” among dental ceramics!
VITA In-Ceram YZ enables the fabrication of precise, individual
restorations with consistent high quality and high functional
strength.
Substructures are veneered with the VITA VM 9 veneering ceramic.
VITA customers benefit from a perfectly matched system of
veneering and substructure ceramic.
Indications
Anterior and posterior crowns and multi-unit bridges
Shades
VITA In-Ceram YZ can be shaded with YZ COLORING LIQUIDS.
In addition to this, VITA zirconium dioxide is also available as
an industrially preshaded version in the shade Color LL1p.
Features/Benefits
High clinical safety / load strength:
A very high material strength (> 900 MPa) and excellent fracture
toughness values. Around 10 years of clinical experience.
Excellent marginal fit / high quality:
The extremely homogeneous material ensures a consistently
high degree of marginal accuracy and distortion-free sintering.
The precise determination of the scaling factor for each batch -
and the information stored in the barcode of the block - guarantee
a controlled degree of sintering shrinkage, and hence optimum
precision.
Reduced production time:
Thanks to the industrially preshaded VITA In-Ceram YZ Color
LL1p blocks, there is no need for manual coloration.
Homogeneous shading:
Industrially preshaded blocks guarantee homogeneous shading
throughout, and hence consistently reproducible aesthetics.
Wide range of indications:
VITA In-Ceram YZ covers all indications from crown substructures
to multi-unit bridge substructures with ten bridge units with
a maximum of two adjacent pontics.
VITA all-ceramics
147