Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Spray</strong> <strong>Nozzles</strong>, Standard <strong>Spray</strong><br />
Full Cone <strong>Nozzles</strong><br />
Features and Benefits<br />
• Solid cone-shaped spray pattern with round impact area.<br />
• Unique vane design with large flow passages provides<br />
superior control and uniform distribution.<br />
• Quick and easy spray tip replacement – remove tips by<br />
unscrewing the retainer cap.<br />
• Lower cost – nozzle body can be reused – only spray tips<br />
are replaced.<br />
Standard <strong>UniJet</strong> Bodies<br />
• Large choice of interchangeable spray tips, body types/sizes,<br />
materials, spray patterns, spray angles, accessories.<br />
• <strong>UniJet</strong> nozzle assemblies:<br />
– Nozzle body, slotted strainer, core, disc, tip retainer.<br />
– Nozzle body, spray tip, tip retainer.<br />
<strong>UniJet</strong> <strong>Spray</strong> Tips<br />
• T female and TT male inlet connections<br />
A typical <strong>UniJet</strong> assembly will consist of a T female body or<br />
TT male body, slotted strainer, core, disc and tip retainer. A<br />
typical <strong>UniJet</strong> assembly with TG tip will consist of a T female<br />
body or TT male body, spray tip and tip retainer.<br />
D<br />
TG<br />
T female body or<br />
T female body or<br />
TT male body<br />
TT male body<br />
Disc and core type<br />
303 Stainless Steel and<br />
Hardened Stainless Steel only<br />
One-piece spray tip<br />
Slotted strainer<br />
<strong>Spray</strong> tip<br />
Core<br />
Tip retainer<br />
Disc<br />
Tip retainer<br />
Phone 1-800-95-spray, FAX 1-888-95-spray<br />
Visit Our Web Site: www.spray.com, Email: info@spray.com<br />
<strong>B14</strong>
<strong>Spray</strong> <strong>Nozzles</strong>, Standard <strong>Spray</strong><br />
Optimization Tips<br />
• See page B2 for optimization tips.<br />
Applications<br />
• Cooling primary metals and other materials<br />
• Creation and dispersion of drops in chemical reaction processing<br />
• Dust control<br />
• Foam break-up, aeration, deaeration<br />
• Gas scrubbing, washing, cooling<br />
• Washing/rinsing<br />
See Also<br />
http://<br />
• Accessories<br />
– Adjustable mounting clamp – Plug valve nozzle bodies<br />
nozzle bodies<br />
– Rollover nozzle bodies<br />
– Ball valve nozzle bodies<br />
– Split-eyelet bodies<br />
– Check valves<br />
– Strainers<br />
– Plates, tip retainers,<br />
– Swivel nozzle bodies<br />
adapters<br />
• FullJet ® Maximum Free Passage spray nozzles for applications<br />
prone to clogging<br />
• SpiralJet ® spray nozzles for maximum liquid throughput<br />
• Kynar ® Quick FullJet spray nozzles for strippers, etchers,<br />
developers (See Section K, Special Purpose <strong>Spray</strong> <strong>Nozzles</strong>)<br />
Full Cone<br />
nozzles<br />
Dimensions and Weights<br />
Ordering Info<br />
Standard<br />
Nozzle<br />
Type<br />
Length<br />
(in.)<br />
Hex.<br />
(in.)<br />
Net<br />
Weight<br />
(oz.)<br />
T+D 1-1/2 13/16 2-1/4<br />
TT+D 1-1/2 13/16 2<br />
T+TG 1-31/32 13/16 2-1/2<br />
TT+TG 1-31/32 13/16 2-1/4<br />
nozzle Body<br />
<strong>UniJet</strong> Complete nozzle<br />
<strong>Spray</strong> tip<br />
1/4 t – SS + tG – SS 10<br />
l l l l l l<br />
Inlet<br />
Conn.<br />
Body<br />
Type<br />
nozzle Body<br />
Material<br />
Code<br />
Tip<br />
Type<br />
Material<br />
Code<br />
Capacity<br />
Size<br />
orifiCe diSC and Core<br />
1/4 tt – SS + d4 – 35 HSS<br />
l l l l l l<br />
Inlet<br />
Conn.<br />
Body<br />
Type<br />
Material<br />
Code<br />
Orifice<br />
Disc No.<br />
Core<br />
No.<br />
Material<br />
Code<br />
BSPT connections require the addition of a “B” prior to the nozzle body<br />
inlet connection.<br />
Based on largest/heaviest version of each type.<br />
Materials<br />
Material<br />
Material<br />
Code<br />
<strong>Spray</strong> Tip<br />
D<br />
TG<br />
Brass (none) l<br />
303 Stainless Steel SS l l<br />
Hardened Stainless Steel HSS l<br />
Other materials available upon request.<br />
Mesh Selection Guide<br />
Orifice<br />
Dia.<br />
in. (mm)<br />
Up through<br />
.018 (.46)<br />
.019 (.47)<br />
through<br />
.031 (.79)<br />
.032 (.80)<br />
and larger<br />
Recommended<br />
Screen<br />
Mesh<br />
200<br />
100<br />
50<br />
Phone 1-800-95-spray, FAX 1-888-95-spray<br />
Visit Our Web Site: www.spray.com, Email: info@spray.com<br />
B15
<strong>Spray</strong> <strong>Nozzles</strong>, Standard <strong>Spray</strong><br />
Full Cone <strong>Nozzles</strong><br />
Performance Data<br />
D<br />
Body<br />
Inlet<br />
Conn.<br />
(in.)<br />
1/4<br />
Orifice<br />
Disc No. –<br />
Core No.<br />
Orifice<br />
Dia.<br />
Nom.<br />
(in.)<br />
Capacity<br />
(gallons per minute)*<br />
*At the stated pressure in psi.<br />
<strong>Spray</strong><br />
Angle<br />
(°)*<br />
10 20 30 40 60 80 100 150 200 300 20 40 80<br />
D1-31 .031 .08 .11 .13 .15 .18 .20 .23 .27 .31 .37 49 47 43<br />
D1.5-31 .036 .10 .14 .17 .19 .23 .26 .29 .35 .40 .48 57 65 53<br />
D2-31 .041 .12 .16 .19 .22 .26 .30 .33 .40 .45 .55 62 63 61<br />
D3-31 .047 .13 .18 .21 .24 .29 .33 .37 .44 .50 .60 63 65 63<br />
D1-33 .031 .09 .11 .12 .14 .17 .20 .22 .26 .30 .37 27 32 35<br />
D1.5-33 .036 .12 .15 .17 .19 .23 .26 .30 .36 .41 .50 37 43 45<br />
D2-33 .041 .13 .17 .21 .24 .29 .33 .37 .45 .52 .63 45 52 55<br />
D3-33 .047 .15 .21 .25 .29 .36 .41 .45 .55 .63 .76 48 54 57<br />
D4-33 .063 .20 .28 .34 .39 .47 .54 .60 .73 .83 1.02 50 56 61<br />
D1-35 .031 .08 .11 .13 .14 .17 .20 .22 .26 .29 .35 19 23 26<br />
D1.5-35 .036 .10 .14 .17 .19 .23 .26 .29 .34 .39 .46 23 27 29<br />
D2-35 .041 .14 .18 .24 .25 .30 .34 .37 .45 .51 .60 40 44 47<br />
D3-35 .047 .16 .22 .26 .30 .36 .41 .45 .55 .62 .74 45 50 52<br />
D4-35 .063 .27 .37 .44 .50 .60 .70 .79 .93 1.1 1.3 68 70 71<br />
D5-35 .078 .34 .48 .58 .66 .80 .92 1.0 1.2 1.4 1.7 67 69 71<br />
D2-56 .041 – – .21 .25 .30 .35 .39 .47 .55 .67 – 14 17<br />
D3-56 .047 – – .29 .34 .41 .48 .53 .65 .75 .92 – 20 23<br />
D4-56 .063 – .39 .48 .55 .67 .78 .87 1.1 1.2 1.5 20 26 29<br />
D5-56 .078 .38 .54 .66 .76 .93 1.1 1.2 1.5 1.7 2.1 26 32 34<br />
D6-56 .094 .55 .78 .95 1.1 1.4 1.6 1.7 2.1 2.5 3.0 34 39 41<br />
D7-56 .109 .76 1.1 1.3 1.5 1.9 2.2 2.4 2.9 3.4 4.2 45 52 54<br />
D8-56 .125 .96 1.4 1.7 1.9 2.4 2.7 3.1 3.7 4.3 5.3 52 57 59<br />
D10-56 .156 1.4 1.9 2.3 2.7 3.3 3.8 4.3 5.2 6.0 7.4 62 65 67<br />
For nozzles using Orifice Disc Nos. 1, 1.5 and 2 or Core Nos. 31 and 33, Slotted Strainer No. 4514-20 equivalent to 25 mesh screen size is supplied. For<br />
all other larger capacity Discs and Cores, Slotted Strainer No. 4514-32 equivalent to 16 mesh screen size is supplied.<br />
Other body types may be available. Contact representative for further information.<br />
For additional information see Data Sheet 4498-1.<br />
TG<br />
Body<br />
Inlet<br />
Conn.<br />
(in.)<br />
1/4<br />
Capacity<br />
Size<br />
Orifice<br />
Dia.<br />
Nom.<br />
(in.)<br />
Max.<br />
Free<br />
Passage<br />
Dia.<br />
(in.)<br />
Capacity<br />
(gallons per minute)*<br />
*At the stated pressure in psi.<br />
<strong>Spray</strong><br />
Angle<br />
(°)*<br />
5 7 10 20 30 40 60 80 100 150 7 20 80<br />
.3 .020 .016 – – – .041 .050 .057 .068 .078 .087 .10 – 50 61<br />
.4 .022 .018 – – – .055 .066 .076 .091 .10 .12 .14 – 56 63<br />
.5 .024 .020 – – – .069 .083 .095 .11 .13 .14 .17 – 56 63<br />
.6 .027 .020 – – – .083 .099 .11 .14 .16 .17 .21 – 54 62<br />
.7 .030 .020 – – – .096 .12 .13 .16 .18 .20 .24 – 54 63<br />
1 .036 .025 – – – .14 .17 .19 .23 .26 .29 .35 – 58 53<br />
2 .047 .040 – – .20 .28 .33 .38 .46 .52 .58 .70 – 50 46<br />
3 .062 .040 – – .30 .41 .50 .57 .68 .78 .87 1.0 – 65 59<br />
3.5 .067 .050 – – .35 .48 .58 .66 .80 .91 1.0 1.2 – 50 46<br />
5 .082 .050 – – .50 .69 .83 .95 1.1 1.3 1.4 1.7 – 65 59<br />
6.5 .094 .063 .47 .55 .65 .89 1.1 1.2 1.5 1.7 1.9 2.3 45 50 46<br />
10 .109 .063 .73 .85 1.0 1.4 1.7 1.9 2.3 2.6 2.9 3.5 58 67 61<br />
Maximum Free Passage Diameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging.<br />
Other body types may be available. Contact representative for further information.<br />
Phone 1-800-95-spray, FAX 1-888-95-spray<br />
Visit Our Web Site: www.spray.com, Email: info@spray.com<br />
B16