B10 - Quick FullJet Spray Nozzles - Spraying Systems Co.
B10 - Quick FullJet Spray Nozzles - Spraying Systems Co.
B10 - Quick FullJet Spray Nozzles - Spraying Systems Co.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Quick</strong><br />
and ProMax ® <strong>Quick</strong> <strong>FullJet</strong><br />
<strong>Spray</strong> <strong>Nozzles</strong>, Standard <strong>Spray</strong><br />
Full <strong>Co</strong>ne <strong>Nozzles</strong><br />
Features and Benefits<br />
• Solid cone-shaped spray pattern with round impact area.<br />
• Fast and easy installation of spray tips without tools.<br />
• Automatic alignment.<br />
• Lower cost – nozzle body can be reused – only spray tips<br />
are replaced.<br />
• Removable caps and vanes for easy inspection and cleaning<br />
on some models.<br />
• Non-removable vane contributes to uniform distribution<br />
across the impact area.<br />
• Standard <strong>Quick</strong> <strong>FullJet</strong> spray nozzle assemblies:<br />
– Nozzle body, spray tip with integral seal.<br />
• ProMax <strong>Quick</strong> <strong>FullJet</strong> spray nozzle assemblies:<br />
– Nozzle body, spray tip, optional external O-ring.<br />
• ProMax <strong>Quick</strong>Jet ® provides increased chemical resistance<br />
and less build-up. Additional protection against contaminants<br />
in harsh environments is provided by internal O-ring seal and<br />
optional external O-ring. See chart for maximum pressures at<br />
various temperatures.<br />
• ProMax <strong>Quick</strong> <strong>FullJet</strong> spray tips color-coded for easy flow rate<br />
identification.<br />
Standard <strong>Quick</strong>Jet Bodies<br />
• QJA female and QJJA male inlet connections<br />
• QJLA female and QJJLA male inlet connections<br />
<strong>Quick</strong> <strong>FullJet</strong> <strong>Spray</strong> Tips<br />
<strong>Quick</strong> <strong>FullJet</strong> nozzles are comprised of two components, a body and a<br />
spray tip. QGA, QHA, QLGA and QLHA are the four spray tips available.<br />
Each of these four spray tips are compatible with either the male or<br />
female bodies.<br />
QGA<br />
QLGA<br />
QJA and QJLA female bodies or<br />
QJJA and QJJLA male bodies<br />
Standard connection<br />
Removable cap and vane<br />
QHA<br />
Large connection<br />
Removable cap and vane<br />
QLHA<br />
<strong>Spray</strong> tip<br />
Standard connection<br />
Non-removable vane<br />
Large connection<br />
Non-removable vane<br />
Phone 1-800-95-spray, FAX 1-888-95-spray<br />
Visit Our Web Site: www.spray.com, Email: info@spray.com<br />
<strong>B10</strong>
<strong>Quick</strong><br />
and ProMax ® <strong>Quick</strong> <strong>FullJet</strong><br />
<strong>Spray</strong> <strong>Nozzles</strong>, Standard <strong>Spray</strong><br />
ProMax<br />
<strong>Quick</strong>Jet ® Bodies<br />
• QPPA male inlet connections<br />
ProMax <strong>Quick</strong> <strong>FullJet</strong> <strong>Spray</strong> Tips<br />
ProMax <strong>Quick</strong> <strong>FullJet</strong> nozzles are comprised of two components, a body and a spray tip.<br />
Available spray tips are shown below. In addition, there is an optional O-ring recommended<br />
for harsh environments.<br />
Full <strong>Co</strong>ne<br />
nozzles<br />
QPPA nozzle body<br />
Optional external O-ring<br />
(CP7717-2/17-VI)<br />
Brown QPHA-1<br />
.1 gpm<br />
White QPHA-1.5<br />
.15 gpm<br />
Gray QPHA-2<br />
.2 gpm<br />
Black QPHA-3<br />
.3 gpm<br />
Orange QPHA-3.5<br />
.35 gpm<br />
Green QPHA-5<br />
.5 gpm<br />
Yellow QPHA-6.5<br />
.65 gpm<br />
Beige QPHA-8<br />
.8 gpm<br />
Blue QPHA-10<br />
1.0 gpm<br />
Red QPHA-15<br />
1.5 gpm<br />
<strong>Spray</strong> tip<br />
Capacities at 10 psi (0.7 bar)<br />
Optimization Tips<br />
See Also<br />
http://<br />
• See page B2 for optimization tips.<br />
Applications<br />
standard <strong>Quick</strong> <strong>FullJet</strong><br />
spray nozzles<br />
• <strong>Co</strong>oling coke, primary metals<br />
and other materials<br />
• Dust control<br />
• Fire suppression/prevention<br />
• Foam break-up, aeration,<br />
deaeration<br />
• Gas scrubbing, washing,<br />
cooling<br />
• Washing/rinsing<br />
ProMax <strong>Quick</strong> <strong>FullJet</strong><br />
spray nozzles<br />
• Chemical manufacturing<br />
• <strong>Co</strong>ating<br />
• <strong>Co</strong>oling<br />
• Food processing<br />
• Metal finishing<br />
• Printed circuit board<br />
manufacturing<br />
• Accessories<br />
– ProMax <strong>Quick</strong>Jet nozzle adapters<br />
– <strong>Quick</strong>Jet adjustable ball fitting nozzle bodies. See chart for<br />
maximum pressures at various temperatures<br />
– <strong>Quick</strong>Jet nozzle system adapters<br />
– <strong>Quick</strong>Jet nozzle system plugs<br />
– <strong>Quick</strong>Jet nozzle system plugs for ProMax bodies<br />
– <strong>Quick</strong>Jet split-eyelet bodies<br />
– UniJet ® nozzle system adapter for <strong>Quick</strong>Jet systems<br />
• Kynar ® <strong>Quick</strong> <strong>FullJet</strong> spray nozzles for strippers, etchers,<br />
developers (See Section K, Special Purpose <strong>Spray</strong> <strong>Nozzles</strong>)<br />
PRESSURE<br />
ProMax <strong>Quick</strong>Jet nozzle maximum pressures<br />
at various temperatures<br />
bar psi<br />
10.0 150<br />
7.0 100<br />
3.5 50<br />
OPERATING REGION<br />
0 0<br />
40 60 80 100 120 140 160 180 200 °F<br />
4 16 27 38 49 60 71 82 93 °C<br />
LIQUID TEMPERATURE<br />
Phone 1-800-95-spray, FAX 1-888-95-spray<br />
Visit Our Web Site: www.spray.com, Email: info@spray.com<br />
B11
<strong>Quick</strong><br />
and ProMax ® <strong>Quick</strong> <strong>FullJet</strong><br />
<strong>Spray</strong> <strong>Nozzles</strong>, Standard <strong>Spray</strong><br />
Full <strong>Co</strong>ne <strong>Nozzles</strong><br />
Performance Data<br />
Inlet <strong>Co</strong>nn.<br />
(in.)<br />
1/8, 1/4, 3/8, 1/2<br />
(QPHA 1/4, 3/8<br />
only)<br />
1/4, 3/8, 1/2<br />
(QPHA 1/4, 3/8<br />
only)<br />
3/8, 1/2<br />
1/2<br />
Nozzle Type<br />
Capacity<br />
Size<br />
Orifice<br />
Dia.<br />
Nom.<br />
(in.)<br />
Max.<br />
Free<br />
Passage<br />
Dia.<br />
(in.)<br />
Capacity<br />
(gallons per minute)*<br />
*At the stated pressure in psi.<br />
QGA QLGA QHA QLHA QPHA 7 10 20 30 40 60 70 80 100 150 7 20 80<br />
l l 1 .031 .025 – .10 .14 .17 .19 .23 .24 .26 .29 .35 – 58 53<br />
l l 1.5 .047 .025 .13 .15 .21 .25 .28 .34 .37 .39 .43 .52 52 65 59<br />
l l 2 .047 .040 .17 .20 .28 .33 .38 .46 .49 .52 .58 .70 43 50 46<br />
l 2.5 .053 .040 .21 .25 .34 .41 .47 .57 .61 .65 .72 .87 43 50 46<br />
l l 3 .063 .040 .25 .30 .41 .50 .57 .68 .73 .78 .87 1.0 52 65 59<br />
l l l 3.5 .063 .050 .30 .35 .48 .58 .66 .80 .86 .91 1.0 1.2 43 50 46<br />
l 4 .067 .050 .34 .40 .55 .66 .76 .91 .98 1.0 1.2 1.4 48 55 50<br />
l l 5 .078 .050 .42 .50 .69 .83 .95 1.1 1.2 1.3 1.4 1.7 52 65 59<br />
l l l 6.5 .094 .063 .55 .65 .89 1.1 1.2 1.5 1.6 1.7 1.9 2.3 45 50 46<br />
l 8 .096 .063 .68 .80 1.1 1.3 1.5 1.8 2.0 2.1 2.3 2.8 54 65 61<br />
l l l 10 .109 .063 .85 1.0 1.4 1.7 1.9 2.3 2.4 2.6 2.9 3.5 58 67 61<br />
l 15 .141 .063 1.3 1.5 2.1 2.5 2.8 3.4 3.7 3.9 4.3 5.2 80 85 80<br />
l 9.5 .109 .094 .81 .95 1.3 1.6 1.8 2.2 2.3 2.5 2.7 3.3 45 50 46<br />
l l 15 .141 .094 1.3 1.5 2.1 2.5 2.8 3.4 3.7 3.9 4.3 5.2 64 67 61<br />
l 20 .156 .109 1.7 2.0 2.8 3.3 3.8 4.6 4.9 5.2 5.8 7.0 76 80 73<br />
l l 22 .188 .109 1.9 2.2 3.0 3.6 4.2 5.0 5.4 5.7 6.3 7.6 87 90 82<br />
l 16 .141 .125 1.4 1.6 2.2 2.7 3.0 3.6 3.9 4.2 4.6 5.6 48 50 46<br />
l 20 .161 .125 1.7 2.0 2.8 3.3 3.8 4.6 4.9 5.2 5.8 7.0 62 65 59<br />
l l 25 .188 .125 2.1 2.5 3.4 4.1 4.7 5.7 6.1 6.5 7.2 8.7 64 67 61<br />
l 30 .189 .141 2.5 3.0 4.1 5.0 5.7 6.8 7.3 7.8 8.7 10.4 69 72 66<br />
l 32 .203 .141 2.7 3.2 4.4 5.3 6.1 7.3 7.8 8.3 9.2 11.1 72 75 68<br />
l 40 .250 .141 3.4 4.0 5.5 6.6 7.6 9.1 9.8 10.4 11.5 13.9 88 91 83<br />
l 50 .266 .156 4.2 5.0 6.9 8.3 9.5 11.4 12.2 13.0 14.4 17.4 91 94 86<br />
<strong>Spray</strong><br />
Angle<br />
(°)*<br />
Maximum Free Passage Diameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging.<br />
Phone 1-800-95-spray, FAX 1-888-95-spray<br />
Visit Our Web Site: www.spray.com, Email: info@spray.com<br />
B12
<strong>Quick</strong><br />
and ProMax ® <strong>Quick</strong> <strong>FullJet</strong><br />
<strong>Spray</strong> <strong>Nozzles</strong>, Standard <strong>Spray</strong><br />
Dimensions and Weights<br />
Standard<br />
Nozzle<br />
Type<br />
Length<br />
(in.)<br />
Hex.<br />
(in.)<br />
Net<br />
Weight<br />
(oz.)<br />
QJA+QGA 2-13/32 1 5<br />
QJJA+QGA 2-5/16 7/8 4-1/2<br />
QJLA+QLGA 2-25/32 1-1/8 8<br />
Body Types<br />
Inlet<br />
<strong>Co</strong>nn.<br />
(in.)<br />
<strong>Co</strong>nn. F<br />
Standard Body<br />
<strong>Co</strong>nn. M<br />
QJA QJLA QJJA QJJLA QPPA<br />
1/8 l l<br />
1/4 l l l<br />
3/8 l l l l l<br />
1/2 l l l l<br />
Full <strong>Co</strong>ne<br />
nozzles<br />
QJJLA+QLGA 2-27/32 1-1/8 7-1/2<br />
QJA+QHA 1-15/16 1 2-1/2<br />
QJJA+QHA 1-27/32 1 2<br />
QJLA+QLHA 2-7/32 1-1/8 4-1/2<br />
QJJLA+QLHA 2-1/4 1-1/8 4-1/2<br />
QPPA+QPHA 1-3/4 7/8 1/2<br />
Materials<br />
Material<br />
Material<br />
<strong>Co</strong>de<br />
<strong>Spray</strong> Tip<br />
QGA QLGA QHA QLHA<br />
Brass (none) l l l l<br />
303 Stainless Steel SS l l l l<br />
Standard <strong>Quick</strong> <strong>FullJet</strong> nozzles available in either brass with a Buna-N<br />
seal or stainless steel with a Viton ® seal.<br />
ProMax <strong>Quick</strong> <strong>FullJet</strong> nozzles available with a Viton seal.<br />
Other materials available upon request.<br />
Based on largest/heaviest version of each type.<br />
Ordering Info<br />
<strong>Quick</strong> <strong>FullJet</strong> coMPlete Nozzle<br />
Nozzle Body<br />
SPray tiP<br />
1/4 QJa – SS + Qha – SS 10<br />
I I I I I I<br />
Inlet<br />
<strong>Co</strong>nn.<br />
Body<br />
Type<br />
Material<br />
<strong>Co</strong>de<br />
Tip<br />
Type<br />
Material<br />
<strong>Co</strong>de<br />
Capacity<br />
Size<br />
ProMax <strong>Quick</strong> <strong>FullJet</strong> coMPlete<br />
Nozzle without exterNal o-riNg<br />
Nozzle Body<br />
SPray tiP<br />
1/4 QPPa + QPha – 3<br />
I I I I<br />
Inlet<br />
<strong>Co</strong>nn.<br />
Body<br />
Type<br />
Tip<br />
Type<br />
Capacity<br />
Size<br />
ProMax <strong>Quick</strong> <strong>FullJet</strong> coMPlete<br />
Nozzle with exterNal o-riNg<br />
Nozzle Body<br />
SPray tiP<br />
3/8 QPPa + QPha – 2a<br />
I I I I<br />
Inlet<br />
<strong>Co</strong>nn.<br />
Body<br />
Type<br />
Tip<br />
Type<br />
Capacity<br />
Size<br />
BSPT connections require the addition of a “B” prior to the nozzle body inlet connection.<br />
Phone 1-800-95-spray, FAX 1-888-95-spray<br />
Visit Our Web Site: www.spray.com, Email: info@spray.com<br />
B13