F56 - DripSafeâ„¢ AirJet Fogger Spray Nozzles - Spraying Systems ...

DripSafe
Special Purpose
Fogger Spray Nozzles,
Air Atomizing Nozzles
Features and Benefits
• High-volume/high-efficiency air atomization.
• Produces an adjustable, high-quality dry fog without wetting with
pressure-fed liquid.
• Ideal for large/open structures and areas with high air exchange rates.
• Operation is through a drip safe air-actuated liquid shut-off valve.
• Automatically prevents liquid from spraying until air pressure at the
nozzle is sufficient for fine atomization.
• Drip safe valve simplifies system construction and control while
improving performance.
• Operates using normal water pressures found in municipal water
systems, eliminating the need for expensive, high-pressure hydraulic
pumps.
• Air requirements are met using an air compressor with a
capacity range that is suitable for the application.
• Requires minimal maintenance.
• The flat spray tip has a large orifice that reduces clogging.
• Spray set-up and built-in strainer are quickly removed by
hand if cleaning is required.
• Spray tip is brass; valve and body polymer.
• Operates at pressures up to 100 psi (7 bar) with a minimum
air pressure range of 25 to 35 psi (1.7 to 2.5 bar).
• A split-eyelet or saddle clamp version of the AirJet
Fogger (45269 Series) is also available for quick and easy
mounting to the liquid supply pipe.
45265
45269
Optimization Tips
• See page F2 for optimization tips.
Applications
1/4" NPT or BSPT (F) Split-eyelet type to clamp on
pipe 1/2" to 1"
• Evaporative cooling
• Fogging
• Humidification
• Insecticide spraying
• Plant propagation
Specifications
Nozzle
Inlet
Conn.
(in.)
AirJet
Fogger
Type
1/4 45265
Fluid
Orifice
No.
Orifice
Dia.
Nom.
(in.)
16.0 .016
20 .020
26 .026
See Also
• Accessories
– Air line filters
– Pressure gauges
– Air pressure regulators – Solenoid valves
– Liquid pressure regulators – Strainers
• For 23412 and QJ25655, request Data Sheets 23412
and 25635
• For 45265 and 45269, request Data Sheets 45265-1-2
and 45269-1-2
http://
To Clamp On
Pipe
Size
(in.)
1/2
AirJet
Fogger
Type
Fluid
Orifice
No.
Orifice
Dia.
Nom.
(in.)
16.0 .016
3/4 45269
20 .020
1 26 .026
Phone 1-800-95-spray, FAX 1-888-95-spray
Visit Our Web Site: www.spray.com, Email: info@spray.com
F56

DripSafe
Special Purpose
Fogger Spray Nozzles,
Performance Data
45265, 45269
Water
Pressure
20
30
40
Fluid Orifice No. 16 (.016" Dia.)
Air Pressure*
*At the stated pressure in psi.
10 20 30 40 50 60 70 80
1.2 1.1 – – – – – –
1.5 2.5 – – – – – –
1.7 1.5 1.2 – – – – –
1.4 2.4 3.4 – – – – –
2.0 1.7 1.5 1.4 – – – –
1.4 2.4 3.3 4.2 – – – –
45265, 45269
Water
Pressure
20
30
40
Fluid Orifice No. 20 (.020" Dia.)
Air Pressure*
*At the stated pressure in psi.
10 20 30 40 50 60 70 80
3.1 1.7 – – – – – –
1.4 2.8 – – – – – –
3.6 2.1 1.7 – – – – –
1.3 2.5 3.6 – – – – –
4.3 3.1 2.2 – – – – –
1.2 2.3 3.4 – – – – –
45265, 45269
Water
Pressure
20
30
40
Fluid Orifice No. 26 (.026" Dia.)
Air Pressure*
*At the stated pressure in psi.
10 20 30 40 50 60 70 80
3.3 1.8 – – – – – –
1.3 2.4 – – – – – –
4.3 3.4 2.1 – – – – –
1.1 2.1 3.2 – – – – –
– 4.5 3.6 2.4 – – – –
– 1.9 2.8 3.9 – – – –
In each line, figures in plain face indicate water atomized in gph (l/h)
at psi (bar) water pressure.
Figures in boldface indicate atomizing air in scfm (Nl/min) at psi (bar)
air pressure.
1. Values in blue area show optimum evaporation under normal
room conditions, when center line of spray is 5' (1.5 m) from the
lower surface.
2. Values in red area can require up to 10' (3 m) for evaporation.
Other values may be used where extended heat, higher air
velocity exist or where slight surface wetting is permitted.
3. AirJet Fogger has a horizontal throwing distance of 15' (4.5 m)
and will expand to approximately 8' (2.4 m) wide/3' (.9 m) thick.
Air Atomizing
nozzles
Ordering Info
Complete Nozzle
Assembly
45265 – 1/4 – 16
l l l
Nozzle
Body
Inlet
Conn.
Fluid
Orifice
Dia.
Complete Nozzle
Assembly
45269 – 1/2 – 16
l l l
Nozzle
Body
Pipe
Size
Fluid
Orifice
Dia.
BSPT connections require the addition of a “B” prior to the nozzle body
inlet connection.
Phone 1-800-95-spray, FAX 1-888-95-spray
Visit Our Web Site: www.spray.com, Email: info@spray.com
F57