specialty haulage solutions for construction and ... - Mega Corporation

More documents

Recommendations

Info

Optional Features Custom options available upon request. Dump Bar Tank Dump Options A dump bar (sometimes called a “drip” or “dribble bar”) is a horizontally arranged 4 inch diameter carbon steel pipe that is drilled along its bottom center line with a row of holes. The dump bar can be either pressurized or non-pressurized. Pressurized dump bars spray penetrating jets of water directly onto the ground surface the width of the tank. Non pressurized dump bars are gravity fed directly from the bottom of the water tank. An advantage of this tool is that water can be applied for dust suppression even in the event that the water pump is out of service. Dump Valve – Remote or Manual Operation The quick dump option is a large drain located at the bottom rear of the tank. This option is available either manually or hydraulically actuated in 4 inch (102mm) diameters. Anti-Siphon Fill Pipe The anti-siphon fill pipe is used with any pressurized water source. It is specifically designed to accommodate municipal water systems and fire hydrants requiring an air gap to prevent back siphoning of water into the supply. Spray Head Valve Options Vertical Side Spray Two spray heads mounted on the front quadrant of the tank with internal piping for spraying vertical fans of water. This spray is suitable for spraying hill sides, piles, and berms. 14
Optional Features Custom options available upon request. Tank Interior Corrosion Resistance Epoxy Tank Lining Tank interior is blasted to a SP10 “near-white” condition, all sharp corners are rounded and voids are filled with special caulking prior to the tank being fully lined with high quality epoxy coating. This coating resists acids, salts, alkalis, and petroleum distillates. Moisture Cure Urethane Tank Lining Tank interior is blasted and fully lined with an aluminum filled moisture cure urethane coating. This is a very tough and flexible coating that is resistant to salty, acidic or alkaline water. NOTE: Coating data sheet and MSDS available upon request. Other Optional Features Factory Installation Water tank fully installed and tested at Mega Corp. factory in Albuquerque, New Mexico, U.S.A. (Requires transport of tractor to factory). Hose Reel - Manual Rewind Hose reels installed on Mega MAC/MAT models include high quality rubber water hose rated to 120 psi (827 kPa) and an adjustable fog to stream nozzle. Fall Protection Tie Off Points Optional custom fall protection tie off points are available upon request. 15
Page 1 and 2: SPECIALTY HAULAGE SOLUTIONS FOR CON
Page 3 and 4: MAC/MAT-Mega Articulated Truck Tank
Page 5 and 6: Standard Features Mega Spray System
Page 7 and 8: Standard Features Mega Spray Head V
Page 9 and 10: Standard Features Self-Loading Capa
Page 11 and 12: Standard Features Technical Manuals
Page 13: Optional Features Custom options av
Page 17 and 18: MAC-MAT6/7 MAC-MAT6/7 730 ADT SWB-S
Page 19 and 20: MAC-MAT8/9 MAC-MAT 8/9 740 ADT SWB-
Page 21 and 22: We Reach Out Globally to Take Care
Page 23 and 24: Warranty Coverage For Your Mega Equ

specialty haulage solutions for construction and ... - Mega Corporation

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?