Maintenance Manual
Maintenance Manual
Maintenance Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SECTION 5<br />
M-4 Water Pump<br />
MTT-MX-2<br />
10 Jul 2012<br />
M-4 Water Pump Description …………… 5-1<br />
M-4 Drive Motor And Crossover ………... 5-2<br />
Drive Motor Speed Control ……………… 5-3<br />
Hydraulic Drive Motor Activation ………. 5-4<br />
Water Pump Activation, Cautions and<br />
Conditions ………………………………. 5-5<br />
Operation and In-service ………………... 5-6<br />
M4 WATER PUMP DESCRIPTION<br />
An open centrifugal type water pump mounted<br />
to the water tank supplies water pressure and<br />
flow for tank mounted spray heads, monitor,<br />
dump bar, and hose reel. The water pump shaft<br />
is driven clockwise (CW) by a hydraulic motor<br />
mounted to the water pump bracket.<br />
Contents<br />
Routine <strong>Maintenance</strong> ………..…………... 5-7<br />
Inspection Schedule ……………………... 5-9<br />
Repair ……………………………………. 5-11<br />
Water Pump Reassembly ………………... 5-17<br />
Function and RPM Adjustment …………. 5-20<br />
Data Sheet ………………………………. 5-24<br />
Clockwise rotation as viewed from the drive<br />
end of the water pump assembly<br />
Due to the nature of these processes, ensure<br />
that all safety information, warnings and<br />
instructions are read and understood before any<br />
operation or any maintenance procedures are<br />
performed. This service function takes place<br />
with heavy components and at moderate<br />
heights, ensure all proper safety procedures and<br />
equipment are maintained when performing<br />
this service. Failure to use and maintain proper<br />
safety equipment and procedures will cause<br />
personal injury, death or damage to equipment.<br />
5-1