Stanley QPM Controllers - Interface Features

Stanley QPM Controllers - Interface Features
Every controller version offers (per spindle) …
- 10,000 rundowns in non-volatile memory
- Last 5 cycles in trace memory
- Last 5 NOK cycles in trace memory
- 32 parameter sets, 8 steps each
- Alphanumeric display for rundown results, raw data, statistics
- Numeric keypad for parameter entry and configuration selection
o Up and down arrows allow alphabetic input where applicable
o Left and right arrows provide space and backspace functions
o Arrow, enter and escape keys allow menu navigation
- Serial port to allow connection of any of the three PC Support software options
Delta Controller
- Runs one tool
- Parameter based user interface
- 24VDC I/O
- RS-232 for PC Support Software
- Does not meet Common Controller specification
Alpha Control Module
- Runs one tool
- Parameter based user interface
- Device Net Slave (I/O Mapping & Explicit Messaging)
- RS-232 for PC Support Software
- Requires Sigma to meet Common Controller specification
Sigma Interface Module
- Interfaces up to 12 Alpha Control Modules, does not run a tool itself
- Alphanumeric menu driven user interface
- Ethernet Port per Common Controller specification
o Also connects PC Support Software for all interfaced Alphas
- Device Net Slave per Common Controller specification
- Device Net Master connects Alphas & any other ODVA Device Net device
- RS-232 for custom printing via ladder logic programs
- RS-232 for PC Support Software for all Alphas interfaced
- Parallel port for printing standard reports (Raw Data, Parameters, etc.)
- 24VDC I/O (16 inputs, 16 outputs, optically isolated,

Three levels of PC Support Software
1. Telnet access to all parameters over RS-232 or Ethernet on any QPM
• Telnet is part of all 32 bit Microsoft Windows operating systems
• Nothing need be purchased from Stanley to use Telnet for parameter access
o Command Line User Interface using ASCII codes
2. Configuration Editor (Windows 95, 98, NT, 2000 compatible)
• Included on CD-ROM supplied with each controller order at no additional charge
• CD-ROM also has tool prints, user manuals, contact info, etc.
o Graphical user interface parameter management (all user parameters)
o Parameter wizards for easy setup
3. Fastening Toolbox (Windows 95, 98, NT, 2000 compatible)
• Requires purchase order for software license on a per seat basis
• Program package bids include first copy at no additional charge
• Per bid specifications, additional licenses are purchased on a per seat basis
o Includes all features of the Configuration Editor plus
o Rundown data upload one controller at a time
• Raw data, statistics, histogram, X-bar/R, Shift End
o Trace capture and overlay
o I/O Ladder Logic file management
o Tool memory reconfiguration
o Tool, communication, and I/O diagnostics
o Spindle & System event logs
o Controller & Tool Memory fault logs