2012 National Space & Missile Materials Symposium

More documents

Recommendations

Info

Research Center 1450 - 1515 Development of Ceramic Microtruss as a Panel Core Structure for Thermal Protection Systems, Dr. Daniel Driemeyer, The Boeing Company 1515 - 1545 Break 1545 - 1610 C/SiC Truss Core for PGS, Ms. Leanne Lehman, The Boeing Company 1610 - 1635 Integral SiC-SiC Structures for Thermal Protection, Dr. Oliver Sudre, Teledyne Scientific 1635 - 1700 Materials Characterization and Optimization of Carbon-Carbon, Mr. Venkatakrishnan Raj Narayanan, Carbon Carbon Advanced Technologies, Inc. 1700 - 1725 Ceramic Matrix Composites for Thermal Protection Systems, Mr. Randy Batzer, Lockheed Martin Aeronautics Wednesday, 27 June 2012 0700 - 0745 Speaker Breakfast for Wednesday Presenters 0700 - 0800 Attendee Continental Breakfast 0700 - 1700 Registration Concurrent Sessions Hypersonics Session Chair: Dr. Paul Jero, AFRL & Dr. Artie Mabbett, DARPA & Dr. James Pittman, NASA Fundamental Aeronautics Hypersonics Session Session Organizers: Mr. Kon Haake, Pratt & Whitney Rocketdyne; Mr. Mitch Petervary, Boeing; Mr. Brian Sullivan, Materials Research & Design, Inc.; Mr. David Brewer, NASA LaRC; Dr. Monica Stucke, AFRL/XPP; Mr. Andy Swanson, Dr. Vanessa Oklejas, The Aerospace Corporation New High-Performance, Lower-Cost Alloys: Ferrium® M54, Ultra-High Strength, Ultra-High Toughness Steel, and High-Strength, High- Toughness Castable Titanium, Mr. Rich Kooy, QuesTek Innovations, Inc. Synthesis and Consolidation of Boride- Carbide Composites with Submicron Scale Microstructure, Dr. E. G. Baburaj, Clarkson Aerospace Corporation Liquid Precursor Systems of Ultrahigh Temperature Ceramics (UHTC) HfB2 and ZrB2 by Rapid Sol-Gel Processing, Mr. Luke Walker, The University of Arizona Ionic Liquids: Lubricants for the Future, Dr. Jenny Devaud, Ball Aerospace and Technology Corporation Charge Dissipating Transparent Conformal Coatings for Spacecraft Electronics, Mr. Adam Goff, Luna Innovations, Inc. Space Materials Experiments & Environmental Effects Simulation Session Chair: Mr. John Vasquez, NRL Session Organizers: Mr. Chip Frohlich, The Boeing Company; Mr. Shane Juhl, AFRL; Dr. Suraj Rawal, Lockheed Martin Space Systems Space Exploration Session Chair: Mr. Wendell Colberg, NASA MSFC Session Organizers: Mr. Rich Wegrich, NASA MSFC; Mr. Mike Fuller, ATK; Mr. Charlie Camarda, NASA HQ; Mr. John Vickers, NASA MSFC; Mr. Alan Brown, Pratt & Whitney Rocketdyne; Dr. Dianne Wiley, Consultant
AFRL/RBSA 0800 - 0805 Session Introduction: Dr. Artie Mabbett, DARPA 0805 - 0830 CPGS: A Year in Review, Mr. Greg Hulcher, OSD 0830 - 0855 Development of High Temperature Materials for Hypersonic Vehicles in China, Mr. James Shircliffe, National Intelligence Council/Science and Technology Intelligence Committee 0855 - 0920 Carbon-Carbon Composite Laminates Mechanical Properties Characterization, Dr. Dragos-Stefan Dancila, The University of Texas at Arlington 0920 - 0945 X-Ray CT-Scan-Based Characterization of Arc- Jet and Laser Heating Induced Damage in Carbon-Carbon Composites, Dr. Dragos-Stefan Dancila, The University of Texas at Arlington 0945 - 1015 Break 1015 - 1040 Ultra High Temperature Mechanical Testing of ZrB2 Based Ceramics, Mr. Eric Neuman, Missouri University of Science & Technology 1040 - 1105 Structural Performance of Continuous Core Structurally Integrated Thermal Protection System, Mr. Carl Poteet, NASA LaRC 1105 - 1130 Energy Conversion Capabilities in Scramjet Vehicles Using Thermoelectrics, Mr. Kevin Yost, AFRL Session Introduction: Mr. John Vasquez, NRL Estimated Environmental Exposures for MISSE-7B, Mrs. Miria Finckenor, NASA MSFC Measurements of the Ionosphere using Miniaturized Electrostatic Analyzer on MISSE-7, Dr. Richard Balthazor, USAF Academy/Space Scientific Instruments, Inc. Post-flight Characterization of Optical Samples Flown on ORMatE-2/Misse-7, Mr. Christopher Panetta, The Aerospace Corporation Post Flight Analysis of Optical Specimens from MISSE-7, Dr. Alan Stewart, The Boeing Company Coverglasses for Advanced Photovoltaics, Mr. James Belcher, Infoscitex Corporation Mechanical Testing of Silicon Carbide Specimens on MISSE-7, Dr. David Witkin, The Aerospace Corporation Results of International Space Station Vehicle Materials Exposed on MISSE-7B, Mrs. Miria Finckenor, NASA MSFC Session Introduction: Mr. Wendell Colberg NASA Space Exploration, Mr. Chris Singer, NASA MSFC Global Commercial Space Transportation Industry, Mr. Ken Gidlow, FAA Commercial Space Transportation Office Design of Large Composite Cryotanks for CCTD, Mr. Michael Robinson and Mr. Michael Hand, The Boeing Company Hydrogen Permeation Testing and Analysis for Composite Cryotanks, Mr. Michael Robinson, The Boeing Company & Mr. Justin Jackson, NASA MSFC Composite Cryotank Technologies and Development Phase 2, Dan Rivera, The Boeing Company Test Approach to CCTD, Mr. Cataldo Mazzola, The Boeing Company C-C Nozzle Extension Designs and Analyses in Support of J-2X Nozzle Extension Risk Reduction Effort, Ms. Leslie Weller, Materials
Page 1 and 2: 2012 National Space & Missile Mater
Page 3: 1045 - 1100 Break 1100 - 1200 Tutor
Page 7 and 8: Structurally Integrated Thermal Pro
Page 9: System Innovation Concepts and Stra

2012 National Space & Missile Materials Symposium

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?