SELF PRIMING PUMPS in cast iron DIMENSION TABLE - Ebara

AGE-AGF
SELF PRIMING PUMPS in cast iron
Self-priming jet pumps produced in cast iron, suitable for water supply, domestic pressure and small irrigation
systems, pool and tank emptying and general clean water pumping.
SPECIFICATIONS
• Maximum working pressure
• Maximum liquid temperature
• Maximum suction depth
: 6 bar
: 45˚C
: 8 m
MATERIALS
• Pump body in cast iron
• Casing cover in AISI 304
• Shaft in AISI 416
• Impeller, nozzle and diffuser in technopolymer
• Mechanical seal in carbon/ceramic/NBR
TECHNICAL DATA
• Asynchronous 2 pole motor
• Insulation : Class F
• Protection degree: IP44
• 1~230V ± 10% 50Hz, 3~230/400V ± 10% 50Hz
• Permanent split capacitor and automatic thermal
overload protection for single-phase version
• Thermal protection to be provided by the user
• DNA- DNM 1”
DIMENSION TABLE
246

AGE-AGF
PERFORMANCE CURVE
PERFORMANCE TABLE
247

AGA-AGC
SELF PRIMING PUMPS in cast iron
Self-priming electropump made in cast iron, suitable for domestic pressure boosting, small irrigation, gardening, car
wash, emptying tank and pools and pumping clear water in general.
SPECIFICATIONS
• Maximum working pressure : 6 bar for AGA 0.60-0.75-1.00
10 bar for other models
• Maximum liquid temperature : 35˚C according EN 60335-2-41 for domestic uses
45˚C for other uses
• Maximum suction
: 8 mts
MATERIALS
• Pump body in cast iron
• Casing cover in AISI 304 for AGA 0.60-0.75-1.00
• Shaft in AISI 416 for AGA 0.60-0.75-1.00,
in AISI 303 for the other models
• Impeller in technopolymer for AGA 0.60-0.75-1.00,
in brass for the other models
• Mechanical seal in carbon/ceramic/NBR
TECHNICAL DATA
• Asynchronous 2 pole motor
• Insulation : Class F
• Protection degree : IP44
• 1~230V ± 10% 50Hz, 3~230/400V ± 10% 50Hz
• Permanent split capacitor and automatic thermal
overload protection for single-phase version
• Thermal protection to be provided by the user
• DNM 1”
DIMENSION TABLE
248

AGA-AGC
PERFORMANCE CURVE
PERFORMANCE TABLE
249

SWA
SELF PRIMING CENTRIFUGAL PUMPS - for swimming pool
SWA is a horizontal centrifugal, self priming pump particularly suitable for water circulation in swimming-pool
systems.
APPLICATIONS
• For water circulation in swimming pool filtration system
MATERIALS
• Pump casing, impeller, diffuser : thermoplastic glass reinforced
• Strainer basket : thermoplastic
• Shaft : stainless steel in AISI 316
• Mechanical seal : ceramic/carbon/ NBR
TECHNICAL DATA
• Capacity up to 32 m 3 /h
• Total head up to 19m
• Power up to 1.5kW
• Maximum working pressure : 3 bar
• Maximum water pressure : 40˚C
• Motor : 2 pole, Class F insulation, IP55 protection, continuously rated
• Single phase version : from 0.5 up to 2HP :
230V-50Hz permanent split capacitor built in overload motor protection with
automatic reset
• Three phase version : from 0.6 up to 2HP :
400V overload protection must be provided by the user
DIMENSIONAL TABLE
250

SWA
PERFORMANCE CURVE
2 Pole
20
18
16
14
12
10
8
6
4
2
Hm
9
12
14
19
24
28
0 6 10 14 18 22 26 30 34
Qm 3 /h
PERFORMANCE TABLE
251

FQ & FQD
SELF PRIMING PUMPS
FQ
FQD
APPLICATIONS
• Water supply
• Agriculture
• Sprinkling
• Drainage
FEATURES
• Self priming pump; Priming required for initial use only
• Enclosed impeller ensures high efficiency
• Fast pumping action; Special design casing provides very fast action
• BPO (back pull out) system; Over haul without suction/discharge pipe removal
• Non-overload design; Ensures stable performance for all applications
• Sealed ball bearing; Eliminates need of lubrication
• Compact construction; The two-pole high speed motor provides a compact unit and
minimizes installation area
• 403 stainless steel shaft; Portion of shaft contacting liquid is made of 403 stainless
and is highly resistant to wear
SPECIFICATION & ACCESSORIES
Model FQ
Model FQD
Standard Optional Standard Optional
Liquid Fresh water Fresh water
Temperatures 0~40°C (32~104°F) 0~40°C (32~104°F)
Re. NPSH 4m (13 feet) 4m (13 feet)
Speeds 3000min -1 - 50Hz 3000min -1 - 50Hz
Installations Indoors Indoors
Materials
Casing Cast iron Cast iron
Impeller Bronze Bronze
Shaft 403 stainless steel 304 stainless steel 403 stainless steel
420J stainless steel
Flange JIS 10kgf/cm 2 GR.F. JIS 10kgf/cm 2 GR.F.
thin type thin type
Construction Direct coupled type Close coupled type
Nozzle position End suction-top discharge End suction-top discharge
Impeller type Enclosed Enclosed
Stuffing box Packing Mechanical seal
Bearing Sealed ball Sealed ball
Accessories [Bare shaft pump] Strainer Base ........................ 1 Strainer
Priming plug Companion flanges Priming plug ............ 1 Companion flanges
Air vent valve (with bolts) Air vent valve .......... 1 (with bolts)
Anchor bolts
Anchor bolts
[With motor] Pressure gauge Pressure gauge
Common base…....1 Compound gauge Compound gauge
Coupling…............. 1 set Vacuum gauge Vacuum gauge
Coupling guard...… 1 Gate valve Gate valve
Check valve
Check valve
252

FQ & FQD
SELECTION CHART
MODEL FQ & FQD
Model FMQ range
SYMBOLS
40 FQ
5. 75
Model FQ or FQD
Size : mm
Motor output : kW
Frequency 50Hz : 5
253

FQ & FQD
DIMENSION
MODEL FQD
Flange
Unit : mm
Size
ø
g e f t n h
32 80 100 135 18 4 15
40 85 105 140 18 4 15
50 100 120 155 18 4 15
65 120 140 175 18 4 15
50 Hz
Size
Output Pump & Motor Weight
Model
{Mass}
Ø kW A B C H P G BN1 BM BN2 BY BZ Z Fd FI Fa Fb kg
32
32FQD5.4 0.4 110 273 125 220 142 12 60 130 60 230 250 12 M10 125 25 40 27
32FQD5.75 0.75 110 287 125 220 150 12 60 130 60 230 250 12 M10 125 25 40 30
40FQD5.75 0.75 150 300 125 225 150 5 65 270 45 290 322 12 M10 125 25 40 36
40 40FQD51.5 1.5 150 353 125 265 157 5 65 270 45 290 322 12 M10 125 25 40 45
40FQD52.2 2.2 150 367 125 265 157 5 65 270 45 290 322 12 M10 125 25 40 49
50
50FQD51.5 1.5 160 353 125 225 157 5 65 270 45 290 322 12 M10 125 25 40 44
50FQD52.2 2.2 160 367 125 265 157 5 65 270 45 290 322 12 M10 125 25 40 50
65
65FQD52.2 2.2 170 367 125 225 157 5 65 270 45 290 322 12 M10 125 25 40 49
65FQD53.7 3.7 170 421 125 265 187 5 65 270 45 290 322 12 M10 125 25 40 69
Note : Open drip-proof type motor is indicated.
Unit : mm
MODEL FQ
50 Hz
Size
Output Pump Motor Common base Anchor bolt Weight
Model
Ø kW A B C H F L
Frame {Mass}
MA MR BM BN1 BN2 BY1 BY2 No.
Fd FI Fa Fb kg
40FQ5.75 0.75 150 200 125 250 25 618 80 125 140 330 85 70 290 230 M10 125 40 40 45
40 40FQ51.5 1.5 150 280 125 290 45 751.5 90L 150 168.5 420 105 80 290 230 M10 125 40 40 64
40FQ52.2 2.2 150 280 125 290 45 781 100L 165 183 420 105 105 290 290 M10 125 40 40 68
50
50FQ51.5 1.5 160 280 125 250 45 761.5 90L 150 168.5 420 105 80 290 230 M10 125 40 40 61
50FQ52.2 2.2 160 280 125 290 45 791 100L 165 183 420 105 105 290 290 M10 125 40 40 71
65
65FQ52.5 2.2 170 280 125 250 45 801 100L 165 183 420 105 105 290 290 M10 125 40 40 67
65FQ53.7 3.7 170 280 125 290 45 828 112M 175 200 420 105 105 290 290 M10 125 40 40 93
80
80FQ53.7 3.7 190 360 125 335 55 928 112M 175 200 540 130 70 350 290 M12 160 50 50 106
80FQ55.5 5.5 190 360 125 335 55 997 132S 205 239 540 130 150 350 350 M12 160 50 50 136
254
Unit : mm
Size
ø
g e f t n h
40 85 105 140 18 4 15
50 100 120 155 18 4 15
65 120 140 175 18 4 15
80 130 150 185 18 8 15
Unit : mm

SQ
SELF PRIMING VOLUTE PUMPS
Semi-open impeller type
Enclosed impeller type
APPLICATIONS
• Building drainage
• Agriculture water supply
• Miscellaneous water supply and drainage
FEATURES
• No priming is required except for initial use
• Special design of casing provides very quick priming
• Water mixed with a little sand or mud can be pumped
up due to semi-open impeller design
• Grease lubrication ensures long life of mechanical seal
APPLICATIONS
• Water supply
• Agriculture
• Sprinkling
FEATURES
• No priming is required except for initial use
• Special design of casing provides very quick priming
• High efficiency is achieved due to enclosed impeller
• No need of lubrication due to sealed ball bearing
SPECIFICATIONS
Semi-open impeller type
Enclosed impeller type
Standard Optional Standard Optional
Liquid Turbid water, Muddy or Fresh water or equivalent
Sandy water, fresh water
Temperature 0 ~ 40°C (32 ~ 104°F) 0 ~ 40°C (32 ~ 104°F)
Re. NPSH Below 5m (at 20°C) Below 5m (at 20°C)
Synchronous speed 1500 min -1 / 50Hz 1500 min -1 / 50Hz
Installation Indoors Indoors
Material
Casing Cast iron Cast iron
Impeller Cast iron Bronze Cast iron Bronze
Shaft Carbon steel 403 stainless steel 403 stainless steel
Flange Standard for model SQ JIS 10kgf/cm 2 GR.F.
Construction
Nozzle position End suction, top discharge End suction, top discharge
Impeller type Semi-open Enclosed
Stuffing box Mechanical seal Mechanical seal
Bearing Sealed ball bearing Sealed ball bearing
Accessories [Bare shaft pump] Strainer [Bare shaft pump] Strainer
Priming funnel ..............1 Anchor bolts Priming funnel ..............1 Companion flange
Automatic air vent valve
(with bolts)
Companion flanges Pressure gauge Anchor bolts
(with bolts) ................... 2 set Compound gauge Automatic air vent valve
[With motor] Vacuum gauge [With motor] Pressure gauge
Common base ............. 1 Check valve Common base ............. 1 Compound gauge
Coupling ...................... 1 set Check valve Coupling ...................... 1 set Vacuum valve
Coupling guard ............ 1 Coupling guard ............ 1 Gate valve
Check valve
255

SQ
SELECTION CHART
: Closed impeller type
SYMBOL
32 SQE 5 .2 S
Phases
S = single phase
No indication =
3 phase
Motor output (kW)
Frequency (5=50 Hz)
Model
Size (mm)
PERFORMANCE TABLE
1. SINGLE PHASE
Size Model Output Capacity Total head Capacity Total head
mm kW m 3 /min m m 3 /min m
25 25SQF5.2S 0.2 0.040 5.4 0.080 4.0
32
32SQE5.2S 0.2 0.050 4.0 0.095 1.9
32SQF5.2S 0.2 0.060 5.2 0.120 3.7
40
40SQE5.2S 0.2 0.075 4.6 0.150 2.5
40SQE5.4S 0.4 0.080 7.5 0.150 6.0
50 50SQE5.4S 0.4 0.110 7.2 0.210 3.6
2. 3 PHASE
Size Model Output Capacity Total head Capacity Total head
mm kW m 3 /min m m 3 /min m
25 25SQF5.2S 0.2 0.040 5.4 0.080 4.0
32
32SQE5.2S 0.2 0.050 4.0 0.095 1.9
32SQF5.2S 0.2 0.060 5.2 0.120 3.7
40
40SQE5.2S 0.2 0.075 4.6 0.150 2.5
40SQE5.4S 0.4 0.080 7.5 0.150 6.0
40SQG5.75 0.75 0.080 12.8 0.200 9.0
50SQE5.4 0.4 0.110 7.2 0.210 3.6
50 50SQE5.75 0.75 0.150 8.3 0.320 6.8
50SQG51.5 1.5 0.140 14.7 0.320 12.0
65SQF5.75 0.75 0.220 7.3 0.380 4.0
65 65SQF51.5 1.5 0.240 9.1 0.500 7.8
65SQG52.2 2.2 0.200 20.3 0.500 13.5
80SQE51.5 1.5 0.400 8.6 0.700 5.6
80 80SQF52.2 2.2 0.320 13.3 0.800 9.0
80SQG53.7 3.7 0.350 21.4 0.800 14.5
100
100SQF53.7 3.7 0.630 14.5 1.250 10.5
100SQG57.5 7.5 0.550 24.4 1.250 18.5
Vib. isolating frame
Type DAS Type DB
- -
- -
- -
- -
- -
- -
Vib. isolating frame
Type DAS Type DB
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
DAS-2
DB-3
- -
DAS-2
DB-3
DAS-2
DB-3
DAS-2
DB-3
DAS-3
DB-4
256

SQ
DIMENSION
SEMI-OPEN IMPELLER TYPE, BARE SHAFT PUMP
Shaft
Strainer
Unit : mm
Size Sø Sp Sq
25 PT-1 44 75
32 PT-1-1/4 54 80
40 PT-1-1/2 63 105
50 PT-2 75 110
65 - 102 190
80 - 122 195
Unit : mm
Pump Companion Shaft Ball Mechanical Weight
Size Model flange bearing seal {Mass}
A B C G E H J K M N O P R T Z Ø t Q S U V W l kg
25 25SQF 60 215 60 175 25 90 40 10 60 160 90 180 205 12 10 PT-1 15 38 18 3 5 5 28 6304ZZ EH-140-20 16
32
32SQE 60 215 60 175 25 90 40 10 60 160 90 180 205 12 10 PT-1-1/4 15 38 18 3 5 5 28 6304ZZ EH-140-20 16
32SQF 60 220 60 200 35 115 40 10 60 150 90 180 210 15 12 PT-1-1/4 18 38 18 3 5 5 28 6304ZZ EH-140-20 18
40SQE 60 220 60 200 35 115 40 10 60 150 90 180 210 15 12 PT-1-1/2 18 38 18 3 5 5 28 6304ZZ EH-140-20 18
40 40SQF 70 225 55 235 45 135 40 -10 90 200 120 230 235 15 12 PT-1-1/2 18 38 18 3 5 5 28 6304ZZ EH-140-20 24
40SQG 70 243 65 285 60 160 50 17 100 240 130 270 226 15 12 PT-1-1/2 18 38 24 4 7 7 36 6305ZZ EH-140-25 35
50SQE 70 225 55 235 45 135 40 -10 90 200 120 230 235 15 12 PT-2 18 38 18 3 5 5 28 6304ZZ EH-140-20 24
50 50SQF 70 250 70 235 50 135 40 15 90 200 120 230 235 15 12 PT-2 18 38 24 4 7 7 36 6305ZZ EH-140-25 30
50SQG 70 253 75 285 50 160 50 27 100 240 130 270 226 15 12 PT-2 18 38 24 4 7 7 36 6305ZZ EH-140-25 37
65
65SQE 70 250 70 235 50 135 40 15 90 200 120 230 235 15 12 PT-2-1/2 18 38 24 4 7 7 36 6305ZZ EH-140-25 30
65SQF 90 255 85 245 60 135 40 20 90 200 120 230 235 15 12 PT-2-1/2 24 38 24 4 7 7 36 6305ZZ EH-140-25 37
80 80SQE 90 255 85 245 60 135 40 20 90 200 120 230 235 15 12 PT-3 24 38 24 4 7 7 36 6305ZZ EH-140-25 37
257

SQ
DIMENSION
ENCLOSED IMPELLER TYPE, BARE SHAFT PUMP
Shaft
Flange
Strainer
Unit : mm
Size Sp Sq
65 102 190
80 122 195
100 182 195
Unit : mm
Size ø1 ø2 g e f t t1 n h
65SQG 65 80 120 140 175 18 2 4 15
80SQF 80 100 130 150 185 18 2 8 15
80SQG 80 80 130 150 185 18 2 8 15
100SQF 100 100 150 175 210 20 2 8 15
100SQG 100 125 150 175 210 20 2 8 15
Unit : mm
Size Model Pump Shaft Ball Mechanical Weight
ø bearing seal {Mass}
kg
A B C G H J K M N O P R T Z Q S U V W l
65 65SQG 135 290 115 305 170 60 10 120 260 160 300 300 18 15 59 28 4 7 7 40 6306ZZ EA-104-30 53
80
80SQF 160 300 135 325 170 50 0 120 260 160 300 300 18 15 59 28 4 7 7 40 6306ZZ EA-104-30 58.5
80SQG 145 290 120 300 170 60 10 120 260 160 300 300 18 15 59 28 4 7 7 40 6306ZZ EA-104-30 53
100
100SQF 160 300 145 315 170 50 0 120 260 160 300 300 18 15 59 28 4 7 7 40 6306ZZ EA-104-30 60
100SQG 175 342 155 425 220 70 15 160 300 200 340 357 18 15 76 32 4.5 8 10 64 6307ZZ EA-104-30 91
258

FSQ
SELF PRIMING PUMPS
APPLICATIONS
• Water supply
• Agriculture
• Sprinkling
• Drainage
• Irrigation
FEATURES
• Self priming pump
Priming required for initial use only
• Fast pumping action
Special design casing provides very fast action
• BPO (back pull out) system
Over haul without suction/discharge pipe removal
• Non-overload design
Ensures stable performance for all range
• Sealed ball bearing
Eliminates need of lubrication
• Semi open impeller
Water mixed with a little sand or mud can be pumped up due to semi-open
impeller design
SPECIFICATIONS & ACCESSORIES
Standard
Optional
Liquid
Fresh water
Temperatures
0~40°C (32~104°F)
Re. NPSH 50Hz ......below 5.5m
Synchronous Speeds 1500 min -1 /50Hz
Installations Indoors Outdoors
Materials
Casing
Cast iron
Impeller Cast iron Bronze
Shaft Carbon steel 420 stainless steel
304 stainless steel
Others
All iron
Flange
JIS 10kg/cm 2 GR.F. thin type
Construction
Nozzle position End suction, top discharge
Impeller type
Semi-open
Stuffing box
Packing
Bearing
Sealed ball
Accessories [Bare shaft pump] Strainer
Air vent valve
Companion flanges (with bolts)
Anchor bolts
[With motor]
Common base…....1
Pressure gauge
Coupling…............. 1 set
Compound gauge
Coupling guard...… 1
Vacuum gauge
Gate valve
Check valve
259

FSQ
SELECTION CHART 1500 min -1
SYMBOLS
125 FSQH 5 5.5
Motor output kW
Frequency 50Hz : 5
Model
Size (mm)
260

FSQ
DIMENSION
BARE SHAFT PUMP
Unit : mm
Size Sø Sp Sq R
Total passage
area mm 2
125 PT-5 215 330 9 730
150 PT-6 215 330 9 730
Unit : mm
Size g e f t t1 n h
125 185 210 250 22 2 8 19
150 215 240 280 22 2 8 19
Unit : mm
Size Model Pump Shaft Ball Mechanical Weight
ø bearing seal {Mass}
A B C D E F G H J M N O P R X Z S Q L U V W #1134 kg
125 125FSQH 250 470 360 195 280 120 14 200 80 360 160 110 150 17 370 19 32 80 63 5 8 10 6307ZZ 4-35x51x8 100
125FSQJ 250 470 385 215 315 120 16 225 80 400 160 110 150 17 370 19 32 80 63 5 8 10 6307ZZ 4-35x51x8 110
150 150FSQH 280 470 405 220 315 120 16 225 80 400 160 110 150 17 370 19 32 80 63 5 8 10 6307ZZ 4-35x51x8 120
150FSQJ 280 470 430 245 315 120 16 250 80 400 160 110 150 17 370 19 32 80 63 5 8 10 6307ZZ 4-35x51x8 130
PUMP WITH BASE AND MOTOR
Unit : mm
Size Sø Sp Sq R
Total passage
area mm 2
125 PS-5 215 330 9 730
150 PS-6 215 330 9 730
50Hz
Unit : mm
Size g e f t t1 n h
125 185 210 250 22 2 8 19
150 215 240 280 22 2 8 19
Size Model Output Pump Motor Common Base Anchor bolt Weight
Ø kW A B C D H L P Frame No. MA MR BN1 BN2 BM BY1 BY2 Fd FI Fa Fb {Mass}
125 125FSQH55.5 5.5 250 470 450 195 290 1167 80 132S 205 239 170 120 660 440 350 M16 315 65 63 196
125FSQJ57.5 7.5 250 470 475 215 315 1206 80 132M 225 258 170 120 660 490 400 M16 315 65 63 229
150 150FSQH55.5 5.5 280 470 495 220 315 1197 80 132S 205 239 170 120 660 490 400 M16 315 65 63 227
150FSQJ511 11 280 470 520 245 340 1331 100 160M 255 323 190 150 740 490 400 M16 315 65 63 282
* All specifications subject to change without notice Note : Motor specifications: Three phase induction motor, totally enclosed fan cooled.
Unit : mm
261

SQPB
SELF PRIMING PUMPS
APPLICATIONS
• Irrigation
• Drainage
• General purpose
FEATURES
• No priming is required except for initial use
• Special design of casing provides very rapid priming for extended piping
• Maintenance is facilitated due to packing type
• Water mixed with a little sand or mud can be pumped up due to semi-open impeller design
• Easy installation with engine for belt driven due to c.c.w rotation
SPECIFICATIONS
Description Standard Optional
Liquid Fresh water, river water, rain water Sea water
Temperatures
0~40°C
Reg. NPSH
4m
Rotation
Counter clockwise when viewed from drive end
Installations
Outdoors
Materials
Casing Cast iron Bronze
Impeller Cast iron Bronze
Shaft Carbon steel Stainless steel
Construction
Impeller
Semi-open
Stuffing box
Packing
Bearing
Sealed ball bearing
262

SQPB
SECTION VIEW
SEMI OPEN IMPELLER
OTHERS
PUMP COUPLED WITH ENGINE
*This picture do not show belt cover.
(for safety purpose belt cover should be installed).
CUT MODEL OF PUMP
263

SQPB
PERFORMANCE CURVE
264

SQPB
DIMENSION
50 SQPB 80 SQPB
100 SQPB
150 SQPB
Unit : mm
Model ø2 g e f t n h
50 SQPB PS-2 - - - - - -
80 SQPB PS-3 130 150 185 18 4 15
100 SQPB PS-4 155 175 210 20 4 15
150 SQPB 150 215 240 280 22 8 19
Model
Pump Shaft End Weight {Mass}
ø1 A B C E G H J T M N O P X Z S Q I V W kg
50 SQPB PS-2 100 240 100 40 165 112 35 10 50 150 80 180 0 12 19 34 27 6 6 17
80SQPB PS-3 120 275 120 25 225 132 40 12 70 190 100 230 10 12 24 50 40 8 7 27
100 SQPB PS-4 130 330 155 25 275 160 50 12 100 230 140 280 20 15 28 55 50 8 7 42
150 SQPB 150 280 470 180 - 400 225 80 16 120 315 160 400 - 19 32 80 68 8 10 130
* All specifications subject to change without notice Note : Motor specifications: Three phase induction motor, totally enclosed fan cooled.
Unit : mm
265

FMQ
SELF PRIMING MULTISTAGE PUMPS
APPLICATIONS
• Water supply
• Agriculture
• Sprinkling
• Drainage
ADVANTAGES
• Energy saving due to high efficiency
• Compact size
• Easy maintenance
• Robust self-priming design
STANDARD SPECIFICATIONS
PERFORMANCE TABLE
Dimension Pump type Fig. Motor Capacity Total head Capacity Total head
mm kW (L/min) m (L/min) m
40
40FMQ252.2 2 2.2 80 46.5 200 35.0
40FMQ353.7 3 3.7 80 73.0 200 59.0
50
50FMQ253.7 2 3.7 140 51.0 320 40.0
50FMQ355.5 3 5.5 140 76.5 320 61.0
65
65FMQ55.5 2 5.5 250 47.5 600 32.5
65FMQ357.5 3 7.5 250 67.0 600 44.0
266

FMQ
SECTION VIEW
PART NO. PART NAME
002 SUCTION CASING
003 DISCHARGE CASING
005 INTERSTAGE CASING
012 SUCTION FLANGE
021 IMPELLER
022 DEFUSER
031 SHAFT
039 KEY
048 IMPELLER NUT
051 BEARING HOUSING
053 BEARING COVER
056 BALL BEARING
085 LANTERN RING BUSHING
091 GLAND
093 DEFLECTOR
100-1 CHECK VALVE
100-2 CHECK VALVE SEAT
107 CASING RING
115 “O” RING
119 PACKING
124 GLAND BOLT
135 WASHER
211 AIR VENT VALVE
217 PLUG
267

FMQ
SELECTION CHART 3000 min -1
Total Head (m)
Capacity (L/min)
268

FMQ
DIMENSION
BARE SHAFT PUMPS
Flange
Shaft
40
50
65
Unit : mm
Size ø g e f t n h
Suction 85 105 140 18 4 15
Discharge 85 105 140 20 4 19
Suction 100 120 155 18 4 15
Discharge 100 120 155 20 4 19
Suction 120 140 175 18 4 15
Discharge 120 140 175 22 4 19
Unit : mm
Size Model Stage Pump Shaft Ball bearing Weight
ø
Pump side Packing {Mass}
A B C D E F G H J M N Z S Q l U V W
Opposite side
kg
40
40FMQ 2 185 360 177 212 212 70 15 160 50 265 100 15 24 50 44 4 7 8 6306ZZ 30x46x7.5-4 41
40FMQ 3 230 360 177 212 212 70 15 160 50 265 100 15 24 50 44 4 7 8 6306ZZ 30x46x7.5-4 50
50
50FMQ 2 195 360 185 225 212 70 15 160 50 265 100 15 24 50 44 4 7 8 6306ZZ 30x46x7.5-4 45
50FMQ 3 240 360 185 225 212 70 15 160 50 265 100 15 24 50 44 4 7 8 6306ZZ 30x46x7.5-4 55
65
65FMQ 2 215 360 205 250 212 70 15 160 50 265 100 15 32 60 50 5 8 10 6307ZZ 30x46x8-4 57
65FMQ 3 265 360 205 250 212 70 15 160 50 265 100 15 32 60 50 5 8 10 6307ZZ 30x46x8-4 68
*All specifications subject to change without notice
In this catalogue, the particulars in { } are in accordance with the International System of Units (SI) and given for reference only.
269

MSQ
MSQ SELF PRIMING MULTISTAGE PUMPS
APPLICATIONS
• General water supply
• Irrigation
ADVANTAGES
• High efficiency is maintained for a wide range due to double volute design
• Long life due to simple construction and quite operation
STANDARD SPECIFICATIONS
270

MSQ
SELECTION CHART 1500 min -1
Total Head (m)
Capacity (L/min)
This area should be recommended to selected FMQ
Discharge flange & JIS10K normal
271

MSQ
PERFORMANCE TABLE
Dimension Pump type Fig. Motor Capacity Total head Capacity Total head
mm kW (L/min) m (L/min) m
40MSQ251.5 2 1.5 90 19.0 180 11.0
40MSQ351.5 3 1.5 90 29.0 180 17.0
40MSQ452.2 4 2.2 90 39.0 180 24.0
40MSQ552.2 5 2.2 90 49.0 180 30.0
40 40MSQ653.7 6 3.7 90 59.0 180 37.0
40MSQ753.7 7 3.7 90 69.0 180 43.0
40MSQ853.7 8 3.7 90 79.0 180 51.0
40MSQ955.5 9 5.5 90 89.0 180 58.0
40MSQ1055.5 10 5.5 90 99.0 180 63.0
50MSQ251.5 2 1.5 140 21.2 280 14.0
50MSQ352.2 3 2.2 140 33.4 280 20.0
50MSQ453.7 4 3.7 140 43.9 280 27.0
50MSQ553.7 5 3.7 140 54.5 280 34.0
50 50MSQ655.5 6 5.5 140 68.4 280 40.0
50MSQ755.5 7 5.5 140 76.4 280 51.0
50MSQ855.5 8 5.5 140 88.0 225 75.0
50MSQ857.5 8 7.5 140 88.2 280 58.0
50MSQ957.5 9 7.5 140 99.0 280 66.0
50MSQ1057.5 10 7.5 140 110.0 280 77.0
65MSQ253.7 2 3.7 225 27.5 450 17.0
65MSQ353.7 3 3.7 225 37.0 450 24.0
65MSQ455.5 4 5.5 225 54.2 450 35.0
65MSQ557.5 5 7.5 225 69.0 450 47.0
65 65MSQ657.5 6 7.5 225 80.2 450 52.0
65MSQ7511 7 11 225 96.0 450 65.0
65MSQ8511 8 11 225 110.0 450 75.0
65MSQ9511 9 11 225 123.0 355 105.0
65MSQ9515 9 15 225 123.1 450 82.0
80MSQ255.5 2 5.5 355 31.0 710 21.0
80MSQ357.5 3 7.5 355 45.8 710 32.0
80MSQ4511 4 11 355 61.9 710 41.0
80 80MSQ5511 5 11 355 77.7 710 54.0
80MSQ6515 6 15 355 90.8 710 62.0
80MSQ7515 7 15 355 108.0 560 92.0
80MSQ7518 7 18.5 355 108.3 710 76.0
80MSQ8518 8 18.5 355 124.0 710 84.0
272