Technical Data Sheet PercoTop ® Putty 3508 - Movac Group Limited
Technical Data Sheet PercoTop ® Putty 3508 - Movac Group Limited
Technical Data Sheet PercoTop ® Putty 3508 - Movac Group Limited
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Technical</strong> <strong>Data</strong> <strong>Sheet</strong><br />
<strong>PercoTop</strong> <strong>®</strong> <strong>Putty</strong> <strong>3508</strong><br />
CS161<br />
Sprayable <strong>Putty</strong><br />
Surface preparation<br />
<br />
<br />
<br />
<br />
Substrates must be free from all contaminants.<br />
Because of the wide variety of substrates and their manufacturing processes, a preliminary test should<br />
be carried out on the respective substrate to ensure that the pretreatment is sufficient to guarantee a<br />
perfect adhesion. For information on substrate and respective surface preparation, refer to the<br />
supplier’s specifications.<br />
Scuff sand smooth substrates.<br />
For UP-GF substrates:<br />
a. eliminate all traces of mould release agents;<br />
b. scuff sand;<br />
c. clean with degreaser before recoating.<br />
Application remarks<br />
<br />
<br />
<br />
<br />
Do not apply CS161 over PVB- (acid curing) adhesion promoters or 1K primers (e.g. synthetic resin).<br />
Can not be used over thermoplastic or tough elastic coatings.<br />
Use only over above mentioned substrates.<br />
If priming is necessary to guarantee durability, following products can be used:<br />
a. CS340, CS341, CS342, CS343, CS344, CS345, CS346 or CS347;<br />
b. CS331 or CS332;<br />
c. CS381.<br />
VOC value ready for use (EU Directive 1999/13/EC)<br />
290 g/l + 5 % CS761.<br />
Product preparation<br />
Mixing ratio<br />
Volume<br />
Weight<br />
CS161 100 100<br />
CS761 5 5<br />
Pot life at 20°C 30 minutes<br />
Reaction temperature At least 15°C<br />
Effective June 2009<br />
CS161 - 2 - EN<br />
2/4
Change language