AGRICULTURAL & EQUESTRIAN

PREMIUM RANGE - CENTURION
CENTURION DUAL WIDTH
Unique “frame within a frame”
enables the crush width to be
set at 580mm, 659mm and
738mm by simply lifting the side
operating handles “over centre”
Cattle Crushes 19
Pallet fork lifting points
welded onto the top
horizontal rails
Traditional
backing up bar
facility
Two full height side doors
on each side hinge from a
middle pillar to allow access
to the animal’s flanks
Hinged vet inspection panel
built into yoke
Handle Closed Lift Handle to move body inwards Body Out Body In
• Fully welded slightly tapered tread plate floor to help keep the animals feet
inside the crush when the side doors are open
Crush • Rear Typegate included as standard
3 Point Linkage Weigh Platform Load Bars F/Trim Pallet Lifting Point Super Scoop Lifting frame Anyhand Rear Gate Sliding Rear Gate Kiosk Lugs 305 extra Length Weight
Centurion • Can Rot be Rump manufactured Bar x whole or part opposite hand if required (extra cost) x
421kg
• Can be manufactured 305mm longer than standard if required (extra cost)
Standard x -Not Available -Optional Extra
F045 2004 3 Point Linkage 04 Weigh Platform Load Bars £2419.92
Crush Type
Centurion Full Access
Crush Type
Centurion Dual Width
x
3 Point Linkage Weigh Platform Load Bars
x
LENGTH BASE LENGTH WIDTH INTERNAL WIDTH HEIGHT
F/Trim Pallet Lifting Point Super Scoop Lifting 2620mm frame Anyhand 2438mm
Rear Gate Sliding 838mm Rear Gate Kiosk 738,659 Lugs 580mm 305 extra Length 1900mm Weight
x
460kg
Standard x -Not Available -Optional Extra
F/Trim Pallet Lifting Point Super Scoop Lifting frame Anyhand Rear Gate Sliding Rear Gate Kiosk Lugs 305 extra Length Weight
x
502kg
Standard x -Not Available -Optional Extra
www.iae.co.uk