AGRICULTURAL & EQUESTRIAN
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Portable Cattle Handling<br />
33<br />
Sliding Gate in Race Joining Arch<br />
For use within race systems, the sliding gate provides a part sheeted barrier to cattle and<br />
features a retractable lintel<br />
Features include<br />
• 840mm o/a wide x 2166mm o/a high<br />
• Acts as a non return gate and stops the next animal in the race<br />
• Slide door can slide from either direction due to the retractable sliding gear<br />
• Flip over plate locks one or both sides of gate<br />
• Comes complete with fixing lugs each side<br />
• Handles and stops are fitted to both sides<br />
• Coupling bars are not included<br />
F040 2008031<br />
04 - Bolt to crush<br />
F040 2008 01 - Standard<br />
£426.46<br />
£408.03<br />
Sliding Gate System in Race Arch<br />
Designed for use directly behind a cattle crush, this system comprises of a sliding gate (see<br />
features above) to stop the next animal in the race whilst the side gates allow access to the<br />
rear of the animal in the crush. Ideal where foot trimming is required.<br />
Features include<br />
• Comes complete with two 1220mm long hinged gates<br />
• Tie bars connect onto the top of IAE cattle crushes for stability<br />
• Creates a safe inspection area to the rear of the crush<br />
• Enables access for foot trimming<br />
• Stops the next animal in the race<br />
• Slide door can slide from either direction due to the retractable sliding gear<br />
• Flip over plate locks one or both sides of gate<br />
• May need some self assembly<br />
• Comes complete with fixing lugs and hinge hooks<br />
• Coupling bars are not included<br />
NB: Cannot be used in conjunction with weigh platform or load bars.<br />
F040 2008 02 £581.30<br />
Access Kiosk<br />
Designed for use in race system. Opposite hand gates can safely be used to allow for an<br />
animal to be stopped and to restrict backing up.<br />
Features include<br />
• Dimensions 1040mm long x 1000mm wide x 1930mm high<br />
• Designed to allow access to the rear of the crush within a race system<br />
• Two gates come with drop over bolt latches fitted<br />
• Creates a cross over passageway in the race or an inspection area to the rear of the crush<br />
• Can accommodate a slide gate to the rear if required<br />
• Comes complete with drilled lug assembly<br />
• Bolt on lug assembly at one end and welded lug assembly at opposite end<br />
• Supplied flat packed for self assembly<br />
• Cannot be used when foot trimming if connected to the crush<br />
• Coupling bars are not included<br />
F040 2012 01 £353.83<br />
www.iae.co.uk
Change language