Interaction Carrara - Elephant Dental
Interaction Carrara - Elephant Dental
Interaction Carrara - Elephant Dental
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
The right solution<br />
for every build-up on metal<br />
Whether working on crowns or bridges, suprastructures, veneers, inlays or onlays: <strong>Interaction</strong> <strong>Carrara</strong><br />
means that there is always a solution on hand. Use sub-structure material made from precious metal or<br />
cobalt-chrome alloys, according to personal preference or as required by the indication.<br />
4<br />
Conventional crowns and bridges.<br />
The <strong>Interaction</strong> <strong>Carrara</strong> ceramic serves a broad indication area in<br />
combi nation with ceramic alloys with a thermal expansion coefficient<br />
ranging from 15.8 to 16.9 μm/m.K (25-500°C). You can choose<br />
from a range of materials, depending on the patient-specific wishes<br />
applicable.<br />
Suprastructures on implants.<br />
If you opt for a ceramic build-up for implant-based solutions, <strong>Interaction</strong><br />
<strong>Carrara</strong> will produce the results envisaged for both screw retained<br />
or cemented restorations. The stability of the sub-structure material<br />
chosen will be decisive for the fit in the mouth and, as such, for patient<br />
comfort.<br />
Certainty; all from just one source.<br />
As soon as they were launched in 1984, it was possible to offer<br />
<strong>Interaction</strong> <strong>Carrara</strong> ceramic solutions in combination with alloys<br />
geared towards use with ceramics. This means that you can always<br />
be assured of a good result! These restorations have already proven<br />
themselves millions of times, over throughout the world.<br />
No deformation.<br />
Even when a restoration is implant-based, excellent alloys are available<br />
for the <strong>Interaction</strong> <strong>Carrara</strong> ceramic. Because of their combination of<br />
a high elongation strain with a high Vickers hardness after hardening,<br />
these ceramics are particularly suitable for use in implant supported<br />
restorations.<br />
Ceramic alloys for crowns and bridges<br />
Alloy: CTE Colour Gold Platinum Palladium Silver<br />
<strong>Carrara</strong> PdF 15,8 rich<br />
yellow<br />
75,0 9,0 - 12,5<br />
Cera H 16,1 yellow 73,1 1,5 5,8 16,0<br />
Cera F 16,3 yellow 58,0 3,0 7,0 27,3<br />
Cera R Plus 16,8 yellow 58,0 2,0 8,0 27,9<br />
Cera E 16,5 white 0,1 - 39,9 51,8<br />
Cera Aurum 16,8 light<br />
yellow<br />
Cera Star 16,9 light<br />
yellow<br />
38,4 - 15 37,5<br />
42 - 15 32,9<br />
Colour Cobalt Chrome Molybdenum Other<br />
Vi-Comp LFC 15,9 white 33,5 29,5 5,0<br />
Fe, Si,<br />
Mn, N, C<br />
The following alloys are the most suitable for suprastructures<br />
Alloy: CTE Colour Gold Platinum Palladium Silver<br />
Cera H 16,1 yellow 73,1 1,5 5,8 16,0<br />
Cera E 16,5 white 0,1 - 39,9 51,8