L5112D10(S) Series C-Bus2 Professional Series High ... - Clipsal

C-Bus Professional Series
High Power Dimmer
(with Socket Outlets)
L5112D10(S) Series
The L5112D10(S) Series C-Bus Professional
Architectural Dimmers are rugged, high quality
dimmer packs (with socket outlets for individual
channels) that are specifically designed for theatrical
dimming applications, providing up to 10A to each of
the 12 dimmable output channels.
The “Advanced Phase Control” (APC) switching
technique gives greater efficiency, resulting in cooler
operation and, ultimately, improved reliability.
The C-Bus 12-Channel Professional Series High
Power Dimmers feature microprocessor-based digital
control. Front panel buttons, channel switches, LED
indicators and a seven-segment display enable the
user to monitor and select the built-in functions.
The user has the ability to select the DMX address,
test selected channels while the remainder of the
dimmer stays “on line”, select output voltage (eg
120V) or ramp curves for designated channels. Other
functions include dimmer “soft” start and channel-bychannel
preheat function.
The C-Bus 12-Channel Professional Series Dimmers
feature opto-controlled electronics switching devices
with carefully designed chokes. These chokes provide
high rise-time with excellent high frequency noise
suppression and low acoustic noise.
The C-Bus 12-Channel Professional Series Dimmers
have been designed to allow for future optional
upgrades to the operating system.
Control to the C-Bus 12-Channel Professional Series
Dimmers can be from either a DMX-512 source
connected to the optional sockets at the front panel,
or from C-Bus connected to either the front-mounted
RJ-45’s or the internal connectors.
The dimmed outlets and the three-phase power entry
are located on the rear panel inside the dimmer.
clipsal.com/cis

L5112D10(S) Series C-Bus Professional Series
High Power Dimmer
• Load rating of 12 channels x 10 Amps.
• Socket outlets for individual channels.
• Suitable for incandescent, low voltage lighting.
Suitable for electronic transformers compatible with
leading edge dimmers.
• Patented APC technology, which means that the
dimmer has greater efficiency than conventional
leading edge dimmer technology resulting in cooler
operation and improved reliability.
• Intuitive operator interface, including direct access
to frequently used functions and an LED per
channel of indication of level and status.
• The electronic design includes a powerful
DSP processor which results in a dimmer with
unsurpassed power for a product of this class.
• Extensive software features include:
• Voltage limiting.
• User-selectable dimming curves.
• Soft-patch of output channels to DMX.
• Configurable fade rates.
• 32 configurable C-Bus scenes.
• Software-configurable from C-Bus.
• Soft Start.
• Cool, quiet and reliable operation.
• Dynamic, real-time Frequency Tracking provides
the flexibility to operate from 40Hz to 80Hz, even on
distorted supply including generators.
• Output voltage line regulation.
• Over-temperature shut-down.
• Facility for addition of RCD module.
• Available with single pole or double pole thermal/
magnetic circuit breakers, depending upon
country sold.
• LED “phase available” indication.
• C-Bus and DMX512 Control protocols.
• Remote override control.
• C-Bus network voltage measurement available via
C-Bus network.
• Built in selectable C-Bus network burden and
network clock generator for simple network
installations.
• Status monitoring and remote reporting.
• Totally digital hard firing means that the dimmer
has excellent immunity to mains supply ripple and
fluctuation resulting in excellent load brightness
stability and less flicker.
• 13 bit fade resolution, means that the dimmer has
extremely smooth fading.
• Mains Supply Terminals accommodates:
1 x 6.0mm2
• Load Terminals accommodates
1 x 4.0mm2 or 2 x 2.5mm2.
• Dimensions: H = 533mm, W = 486mm, D = 163mm.
• Weight: 18kg.
Clipsal Integrated Systems Pty Ltd.
ABN 15 089 444 951
Head Office
12 Park Terrace, Bowden, South Australia 5007
Telephone (08) 8269 0560
International +61 8 8269 0560
Facsimile (08) 8346 0845
International +61 8 8346 0845
E-Mail
cis@clipsal.com.au
Internet
clipsal.com/cis
International Enquiries
Head Office Export Department
Telephone +61 8 8269 0587
Facsimile +61 8 8340 7350
E-Mail
export@clipsal.com.au
Internet
clipsal.com
New Zealand
Clipsal Industries (NZ) Ltd
Telephone +64 9 576 3403
Malaysia
Clipsal Integrated Systems (M) Sdn Bhd
Telephone +60 3 7665 3555
Singapore
Clipsal Integrated Systems Pte Ltd
Telephone +65 266 1998
Hong Kong
Clipsal Integrated Systems (HK) Limited
Telephone +852 2 487 0261
China
Clipsal China Limited
Telephone +86 755 246 1122
Taiwan
Clipsal (Taiwan) Co Ltd
Telephone +886 2 2558 3456
Thailand
Clipsal Thailand Ltd
Telephone +66 2 952 5338
South Africa
Clipsal South Africa (Pty) Ltd
Telephone +27 11 314 5200
United Kingdom
Clipsal Ltd (UK)
Telephone +44 1494 521 111
Greece
Clipsal Hellas S.A.
Telephone +30 1 0993 9165
Patented
© Copyright Clipsal Integrated Systems Pty Ltd 2003