engine cranes engine stands engine supports ... - ATEC Trans-Tool

42
ENGINE CRANES ENGINE STANDS ENGINE SUPPORTS
2-TON ENGINE CRANE
• 4 position boom: .5-Ton, 1-Ton, 1.5-Ton, 2-Ton
• Boom height:
position: 2-Ton, 17-1/8” min.-69-1/4” max. Length: 49-1/8”
position: 1.5-Ton, 12-5/8” min.-75-1/8” max. Length: 58”
position: 1-Ton, 8-1/8” min.-81-1/4” max. Length: 66-7/8”
position: .5-Ton, 3-3/4” min.-87-1/8” max. Length: 75-3/4”
• Adjustable Front and Rear legs. • Weight: 231 lbs.
ATD-7484. . . . . . . . .$339.95
4,000 LB. CAPACITY
FOLDING FLOOR CRANE
• Folds up for compact storage, out of your way.
• Front wheels are 3-1/2” with 5-7/8” rear casters.
• This 4000 lb. capacity crane has a reach of 25” to 46”
OTC-2004 . . . . . . . . . . . . . . . . $475.00
ATD-7454
2-TON FOLDING ENGINE CRANE
• 4 position boom: .5-Ton, 1-Ton, 1.5-Ton, 2-Ton
• Boom Height,
position: 2-Ton, 10-3/4” min.-79-1/4” max. Ln: 50-1/8”
position: 1.5-Ton, 4” min.-83” max. Length: 57-1/4”
position: 1-Ton, 0” min.-86-3/4” max. Length: 64-3/8”
position: .5-Ton, 0” min.-90-1/2” max. Length: 71-1/2”
• Foldable Legs, built-in tool tray, swivel hook
• Weight: 236 lbs.
ATD-7485 . . . . . . . . $389.00
8-TON LONG JACK
ATD-7486. . . . . . . . . . . . . .$98.50
4,400 LB. CAPACITY
HEAVY-DUTY FLOOR CRANE
• Space-saving fold-away feature for storage.
• Adjustable leg spread for “close-in” work.
• Telescoping boom extension for added reach.
• Equipped with 2-speed hydraulic hand pump.
PRESSES
20-TON HYDRAULIC SHOP PRESS W/ BOTTLE JACK
• Automatic ram retraction when jack valve is opened Rugged construction with rigid steel
channel frames.Heavy Duty reinforced angle steel bed provides a stable work area.
• Height: 64-1/2”, Width: 28” •Int. Width: 20” Depth: 19” Weight: 235 Lbs
12-TON HYDRAULIC SHOP PRESS
W/ BOTTLE JACK
• Automatic ram retraction when jack valve is opened.
• Heavy Duty reinforced angle steel bed provides a stable work area.
• Rugged construction with rigid steel channel frames.
• Height: 59”, Width: 22-3/4”
• Int. Width: 16-1/2”, Depth: 18-1/2”
• Ram Stroke: 9-1/8” • Weight: 127.5 Lbs
ATD-7453. . . . . . . $365.00
12-TON HYDRAULIC BENCH PRESS
WITH BOTTLE JACK
• Automatic ram retraction when jack valve is opened. Rugged
construction with rigid steel channel frames. H/D reinforced angle
steel bed provides a stable work area.
• Height: 38”, Width: 22-3/4”, Int. Width: 13-3/4”, Depth: 16-1/8”
• Ram Stroke: 9-1/6” Weight: 152 Lbs
ATD-7452 . . . . . . . . . . . . . . . . $305.00
RHINO BOTTLE JACKS
• ANSI approved, 2 Piece Handles
• Heat Treated Extension screws on all models
through 20-Ton
• Patented built-in by-pass mechanism
• Full power in horizontal position
• 90 Day Warranty
STAMPED JACK STANDS
6-TON CAPACITY
Lifting min. 15-3/8”, Ht. Max. 24-1/4”.
Base size 8-7/8” x 10-7/8”
Ship wt. 29.4 lbs.
90 Day Warranty
RHO-10126 . . . . . . $44.95
3-TON CAPACITY
RHO-10123 . . . . . . $24.99
OTC-1820 . . . . . . . . . . . . . . .$3,595.00
36 MO. LEASE . . . . . . . . . . . . . . . . . . . $123.56
ATD-7454 . . . . . . . . . . . . . . . . $495.00
ITEM NO. CAPACITY LOW HIGH PRICE
RHO-10101 2-Ton 7-1/4” 13-5/8” $11.99
RHO-10103 6-Ton 8-5/8” 16-3/4” $20.35
RHO-10104 8-Ton 8-7/8” 17-5/8” $26.90
RHO-10105 12-Ton 9-1/2” 18-5/8” $35.95
RHO-10107 20-Ton 9-1/2” 18-5/8” $52.50
ATD-7452
U-STYLE ENGINE STAND
• Holds 1250 Lbs.
• Base Size: 33-3/8” (L) x 33-7/8” (W)
• Height: 42-3/4” • Weight: 87.4 Lbs. • ANSI Rated
• Head Plate: 7-1/2” x 6-1/2” x 7/8” x 10-1/2”
• Locks plate in any pos. • 360˚ swivel head
ATD-7482. . . . . . . . $127.95
1,250 LB. FOLDABLE
ENGINE STAND
• Meets ASME/ANSI - PALD safety standards
• “U” Shaped construction for a safe, stable
working area
• Foldable Legs save space
• Head locks in any position
• Base Size: 41-3/4” x 23-5/8”
• Height: 42-3/4”
• Weight: 95 Lbs.
ATD-7480 . . . . . . . . $179.95
360˚ ROTATABLE HEAD
1,250 LB. ENGINE STAND
• Heavy Duty Worm Gear Allows for
Smooth Easy Engine Rotation
• Meets ASME/ANSI-PALD safety standards
• “U” Shaped construction for a safe,
stable working area
• Foldable Legs save space
• Base Size: 41-3/4” x 23-5/8”
• Height: 42-3/4” • Weight: 115 Lbs.
ATD-7479. . . . . . . . $299.00
1,250 LB. CAPACITY ENGINE STAND
• This model has a heavy-duty mounting plate and adapter arms
for servicing light truck and car engines.
• Fixed polyurethane back wheels and poly
swivel casters on front for smooth travel.
• A 24” handle makes easy work of rotating the
engine 360°; hitch pin locks engine in place.
• Physical dimensions: 24” height to center
line; 33” length; and 33-3/4” width.
Wheel dia. 3-1/2”
OTC-2012A . . . . . . . . . . . . . . . $124.95
OTC-1833
25-TON SHOP PRESS
• Raise and lower bed easily on this tough,
economical press that is ideal for pressing
rear axle bearings, piston pins, and more.
• Includes OTC No. 4002 hand pump
and 6-1/4” stroke ram.
OTC-1833 . . . . . . . . . . . . . . $2,350.00
36 MO. LEASE . . . . . . . . . . . . . . . . . . . . $83.00
2-TON HYDRAULIC TROLLEY JACK W/CASE
• Lifting Range: 5-1/2” to 14”
• Internal safety valve prevents over load
• Built-in by-pass device• ANSI Rated
• Steel swivel casters
• Jack comes with Blow Molded Case
• Weight: 21.8 Lbs.
RHO-7304 . . . . . . . . . $42.75
RHO-7304 WITHOUT BLOW
MOLDED CASE
RHO-10110 . . . . . . . . . . . . . . . . $31.99
3-TON HEAVY DUTY HYDRAULIC FLOOR JACK
• Meets ASME/ANSI - PALD Safety Standards
• Lifting range: 5-1/2” to 19”
• U.S. Patented Swift-Lift Lever
• Internal safety valve & Built-in by-pass device prevents over-pumping
• Swivel steel casters
• Extra Heavy-Duty Welded Steel Chassis
• 42-1/8” Two piece handle • 84 lbs.
RHO-10113 . . . . . . . . . $124.96
2-1/2 TON HYDRAULIC GARAGE
JACK WITH FREE 3-TON
RATCHETING JACK STANDS
RHO-10112JS . . . . . . . $104.45
RHO-10113
GOJAK CAR DOLLY
• Lifts tire up to 9” wide • 1 year warranty
• Handles wheel sizes 13” to most low profi le 16”
• Sold Individually, not as a set
1,500 LB. CAPACITY
GOJ-G6200 . . . . . . . . . . . . . . . $259.95
1,250 LB. CAPACITY
GOJ-5000 . . . . . . . . . . . . . . . . $189.00
ENGINE TRANSVERSE BAR
WITH SUPPORT ARM
Engine Transverse Bar w/ Support Arm Makes
removal of transaxle easy by
supporting engine of front wheel
drive vehicles.Support Arm provides
three point support for off-center loads.Includes: 1/8” braided steel cables
and 14” adjustable hooks.Capacity: 700 lbs.
AST-5820 . . . . . . . . . . . . . .$99.95
ENGINE SLINGS
ATD-7530
• Ideal for engine removal or installation
• Working load limit: 1250 lbs.
• Bolts to motor mounting holes.
ATD-7530 . . . . . . . $16.95 ATD-7489
ATD-7489 . . . . . . . $49.95
ENGINE TRANSVERSE BAR
W/ARM SUPPORT
• 700 lb. capacity adjustable transverse bar
• (2) 14” adjustable hook screws
• 1/8” x 38” braided steel cables
ATD-7477
• Width expands from 34-1/2” to a full 61”
• Weight 25.5 lbs.
ATD-7477. . . . . . . . . . . . . .$89.95
THREE-POINT ENGINE SUPPORT BAR
• Cutting edge, patent pending design self-centers load to prevent tipping
on inclined surfaces.
• Smooth sliding legs adjust easily
to different vehicle widths.
• PVC-coated support legs don’t
scratch vehicle surfaces.
• “Quick Connect” third-point bar
makes setup a snap.
• Spinner handle enables lightning fast adjustment.
OTC-1725 . . . . . . . . . . . . . . . . $194.99
TWO-POINT ENGINE SUPPORT BAR
• Smooth sliding legs adjust easily to
different vehicle widths.
• PVC-coated support legs
don’t scratch vehicle surfaces.
• Spinner handle enables lightning
fast adjustment.
OTC-1723 . . . . . . . . . . . . . . . . $149.95
CAR DOLLIES
1,500 LB. EASY ROLLER
• 1,500 lb. capacity per unit.
• Four heavy-duty phenolic casters.
• Hydraulic lift mechanism with locking pin.
• Fits tread widths up to 12”.
• Sold individually not as a pair
RHO-7304
3-TON
RATCHETING
JACK STANDS
WITH THE PURCHASE OF
RHO-10112JS ONLY
A $25.00 VALUE!
OTC-1580 . . . . . . . . . . . . . . . . $129.95
DOUBLE-BAG AIR JACK
• Internal stabilizing cylinder
• Portable, simple and safe
• Compact and lightweight
• Balanced handle for ease of positioning
• Strong, fast and effi cient
HRK-AJ2 . . . . . . . . . . . . . . . . . $549.95
RHINO LIFTING
TOOLS FOR THE SERIOUS DO-IT-YOURSELFER! BACKED WITH A 90 DAY WARRANTY
700 LB. TELESCOPIC TRANSMISSION JACK
• Base Size 36-1/8” L x 32-5/8” w
• Lifting Range: 57” to 76-1/8”
• Four Adjustable load support arms fi t all transmission pan fl anges
• Wide base provides stability; 4 full swivel, ball bearing casters make
maneuvering easy.
• Includes built-in by-pass mechanism
• Weight: 137 Lbs
RHO-7425 . . . . . . $284.95
RHO-7425
750 LB. DELUXE “I” ENGINE STAND
• Holds 750 Lbs. • Height: 30-1/2”
• Base Size: 31-7/8” (L) x 28-3/4” (W)
• 360˚ Adjustable Locking Head Plate
RHO-10137 • Weight: 45.2 Lbs.
• Locks plate in 8 positions
• Meets ASME/ANSI Standards
RHO-10137 . . . . . . $68.95
2-TON FOLDING
ENGINE CRANE
• 4 position boom: .5 , 1 , 1.5 & 2 Ton
• Boom height positions: 2 Ton, 14” or 18-1/8” min., 74” or 80” max.
Length: 50-1/8”; 1.5 Ton, 10” or 14-1/8” min., 78-3/4” or 85-1/8” max.
Length: 57-1/4” ; 1 Ton, 5-1/8” or 10-1/4” min., 83-3/8”
or 91-1/4” max. Length: 64-3/8” .5 Ton, 0” or 6-1/2” min., 88-3/8” or
96-3/8” max. Length: 71-3/8”
• Meets ASME/ANSI Standards • Heavy Gauge Structural Steel
• 8 Ton Long Jack • Adjustable front legs
• Crane folds for compact storage
RHO-10141 . . . . . . . . . . . . . . . $299.95
RHO-10141

1/2-TON RATCHETING HEAD TELESCOPIC HYDRAULIC
TRANSMISSION JACK WITH FREE 8-GALLON
PLASTIC WASTE OIL DRAIN WITH CASTERS
• 1000 lbs. capacity, height range 36-3/4” to 76-5/8”
• Operating width 12-5/8”
• Meets ASME/ANSI-PALD safety standards.
• (4) adjustable load support arms fi t most
transmissions, patented built-in bypass device.
• Ratcheting head quickly adjusts to any
transmission pan confi guration.
• Foot operated pump and release leaves hands free.
• Wide base stability.
• Full swivel ball bearing casters.
• Weight 161 lbs.
• With FREE ATD-5180 8-Gallon Plastic Waste Oil Drain with Casters
ATD-7430PROMO . . . . . . . . . $699.00
1/2-TON RATCHETING HEAD TELESCOPIC AIR
HYDRAULIC TRANSMISSION JACK WITH FREE
8-GALLON PLASTIC WASTE OIL DRAIN WITH CASTERS
• Weight: 180 lbs.
• With FREE ATD-5180 8-Gallon Plastic Waste Oil Drain with Casters.
ATD-7431PROMO . . . . . . . . . $919.00
1,100 LB. HYDRAULIC
TRANSMISSION JACK
• Jack Size: 31-1/8” (L) x 15” (W) x 13” (H)
• Lifting Range: 8-1/2” to 24-3/4”
• Patented built-in by-pass device
• Adjustable head can be tilted forward,
back and to the side for optimum alignment.
• Saddle: 12-5/8” (L), 7-7/8” (W)
• Saddle Tilt: 10˚ R or L, 60˚ FWD, 10˚ BWD
• Weight: 105.6 lbs.
ATD-7435. . . . . . . . .$319.00
2,000 LB. HYDRAULIC
TRANSMISSION JACK
• Jack Size: 39-3/8” (L) x 19-1/8” (W) x 7-7/8” (H)
• Lifting Range: 7-7/8” to 33-1/2”
• Patented built-in by-pass device
• Saddle: 17” x 15-3/4”
• Adjustable head can be tilted forward,
back and to the side for optimum alignment.
• Saddle Tilt: 30˚ FWD, 30˚ BWD, shifts 1-7/8” L/R
• Weight: 197.4 lbs.
ATD-7436. . . . . . . . .$539.00
1-TON HYDRAULIC
TRANSMISSION JACK
• Wide stance tubular steel frame equipped
w/ 4 ball bearing 360° swivel casters
• Overall width 29-7/8”; Overall height 9-1/2”
• Low height 10”; High height 44”
• Two heavy cast adjustable mounting plates
• Forward tilt 40°; Rearward tilt 15°; Sideways tilt 10°
• Power raise 34”
• Overall length 48”
• 2 Year Warranty
ATD-7435
HWA-HW93718 . . . . . . . . . . .$1,795.00
36 MO. LEASE . . . . . . . . . . . . . . . . . . . . $63.40
1/2-TON LOW-LIFT HYDRAULIC
TRANSMISSION JACK
HWA-HW93716 . . . . . . . . . . . . $865.00
NEW
Ratcheting
Heads on
ATD-7430PROMO
& ATD-7431PROMO
2,200 LB. LOW-LIFT TRANSMISSION JACK
WITH FREE MACK TRANSMISSION
MOUNTING BRACKETS AND FREE
ADJUSTAGRIP ® MOUNTING ARM
• The 8-1/4” low height is perfect for
aerodynamic trucks with low ground clearance.
• Special mounting adapter (No. 220492) fi ts popular
Eaton® Fuller® RoadRanger® transmissions
used on nearly all Class 7 and 8 heavy-duty trucks.
Mounting plate angle is adjusted with the turn of a wrench.
• Degree of tilt: 20° back, 15° forward, 12° side to side.
• Swiveling pump handle permits ease of operation in restricted working
spaces. Fast-acting pump quickly raises lifting arm.
• Comes with FREE OTC-221790 Mack
transmission mounting brackets
and a FREE OTC-305811 Adjustable Grip Arm
OTC-5019PROMO . . . . . . . . $2,199.00
36 MO. LEASE. . . . . . . . . . . . . . . . . . . . $77.67 OTC-221790
ATD-7436
NEW
RATCHETING
HEADS
ATD-7430PROMO
2-Stage Pump
TRANSMISSION JACKS
ATD-7437
3,000 LB. HYDRAULIC TRANSMISSION JACK
• Jack Size: 46-3/4” (L) x 25-5/8” (W) x 9-7/8” (H)
• Lifting Range: 7-7/8” to 37-1/4”
• Patented built-in by-pass device
• Saddle Tilt: FWD & BWD
• Adjustable head can be tilted forward, back and to the side for optimum alignment.
• Saddle: 15-1/2” x 13-1/4”, 24-7/8” x 19” (ext)
• Weight: 376.2 lbs.
ATD-7437. . . . . . . . .$935.00
ATD-7433PROMO
FUEL TANK HANDLER
• Provides safe and effi cient handling
of fuel tanks; adjusts horizontally from
24” to 38” and vertically from 7” to 11”
to service tanks up to 40 gallons.
• Universal adapter plate fi ts virtually all
competitive transmission jacks in the market.
• Use with OTC-1728, and Stinger OTC-1793,
OTC-1793A, OTC-1794, OTC-1794A.
• Patent-pending gearing mechanism ensures
equal extension of lift arms to correctly
balance load over jack.
• Four support risers individually adjust to
ensure perfect fi t to any fuel tank design.
• Cross-link polyethylene foam pads protect
tanks from damage.
• American-made, and carries Lifetime
Marathon Warranty ® .
OTC-1758. . . . . . . . .$319.95
1/2-TON HIGH-LIFT
TRANSMISSION JACK
• Universal mounting head provides wide fore & aft tilt
range, making alignment of transmission easier
• Two stage hydraulic cylinder design speeds lifting of
transmission into position for installing.
• Carries OTC’s Lifetime Marathon Warranty
• Foot pump & pedal
• Made in the USA
1/2-TON TELESCOPIC
TRANSMISSION JACK
• First stage utilizes air for a quick initial rise
Second stage uses hydraulic hand pump for precise control
• Wide steel frame equipped w/ 4 ball bearing 360° swivel
casters for easy maneuverability
• Four ratcheting load support arms quickly confi gure to most
transmission pan confi gurations
• Low height 34 1/4”; High height 72”, Base overall width 41”,
Base overall length 41”
• Forward tilt 50°; Sideways tilt 20° (Optional adapters available)
• 2 Year Warranty
HWA-HW93720 . . . . . . $2,033.00
36 MO. LEASE . . . . . . . . . . . . . . . $71.81
OTC-305811
FREE
ATD-5180
8-Gallon Plastic
Waste Oil Drain
With Casters
Retail Value: $79.95
2-Stage
Pump
Air/Manual
Function
ATD-7431PROMO
OTC-1791
OTC-1791. . . . . . . $1,440.00
36 MO. LEASE . . . . . . . . . . $50.86
OTC-1793A
1-TON TELESCOPING HIGH LIFT
TRANSMISSION JACK WITH FREE
8-GALLON PLASTIC WASTE OIL
DRAIN WITH CASTERS
• Jack Size: 42-1/8” (L) x 39-1/2” (W) x 48-5/8” (H)
• Lifting Range: 48-5/8” to 77-3/8”
• Patented built-in by-pass device
• 4 Adjustable arms fi t most trans. pan fl anges
• Foot operated pump & release leaves hands free
• Saddle: 15-1/2” x 12-5/8”, 24-1/2” x 18-7/8” (extended)
• Weight: 305.4 lbs. • Meets ANSI Standards
• Full Swivel Ball Bearing Casters • Wide Base Stability
• With FREE ATD-5180 8-Gallon Plastic Waste Oil Drain with Casters
ATD-7433PROMO . . . . . . . $1,060.00
36 MO LEASE . . . . . . . . . . . . . . . . . . . . . $37.44
1-TON AIR/HYDRAULIC TRANSMISSION
JACK WITH FREE 8-GALLON PLASTIC
WASTE OIL DRAIN WITH CASTERS
• Jack Size: 34-1/8” (L) x 36-1/8” (W) x 40” (H)
• Lifting Range: 36-3/4” to 76-5/8”
ATD-7434PROMO . . . . . . . . $1,220.00
36 MO. LEASE. . . . . . . . . . . . . . . . . . . . . $43.09
2,000 LB. HIGH-LIFT
TRANSMISSION JACK
FOR TRUCKS AND BUSES
• Low height of 41-1/2” allows transmission
to be rolled out from under vehicle’s frame.
• Foot-operated air pump enables the operator
to effortlessly raise the transmission into place.
• Rugged heavy wall tubing and
oversized base for stability.
• A dedicated adapter for Allison
500 and 600 series automatic
transmission is included.
OTC-5078. . . . . . . $2,095.00
36 MO. LEASE . . . . . . . . . . $74.00
1,000 LB. HIGH-LIFT
TRANSMISSION JACK
• Air assist fi rst stage for speed;
second stage is hydraulically
actuated for precision.
• Height range is 34-1/2” to 75”.
Maximum tilt is 50° forward to 20°
backward and 10° to either side.
• Lifetime Marathon Warranty
OTC-1728. . . . . . . $2,165.00
36 MO. LEASE . . . . . . . . . . $76.47
1,000 LB. LOW-LIFT
TRANSMISSION JACK
• Wide wheel base with four swivel casters, and two handle
grips makes it easy to position under the vehicle.
• Universal mounting head, with adjustable
brackets, tilts front-to-back and side-to-side.
• Safety overload prevents use beyond its rated capacity.
• Height range: 6-1/2” to 29-1/2”.
OTC-1521A . . . . . . . . . . . . . . . $454.00
1,000 LB. CAPACITY
HIGH-LIFT TRANSMISSION JACK
• Wide leg base (37-1/8”) with swivel wheels (brakes on
two wheels).
• Fully adjustable universal saddle.
• Foot operated hydraulic pump for ease of
control when positioning or removing transmission.
• Height in low position, 34-7/16”; max. 70-7/8”.
Tilt forward, 24°; backward, 19°; either side, ±20°.
OTC-1793A . . . . . . .$799.00
OTC-1521A
POWER TRAIN LIFT
• Supports up to 1,250 lbs. - ideal for engine and transaxle service.
• Height range is 29-1/2” to 68-1/2”, Comes with tilting plate.
• Compact design and swivel casters for easy maneuverability.
OTC-1585. . . . . . . $2,315.00
36 MO. LEASE . . . . . . . . . . $81.77
43
MOTORCYCLE & ATV LIFTS
MOTORCYCLE & ATV LIFT
• 1,500 lb. capacity and 17” long skids that will lift the largest, widest cruisers.
• Lowest clearance available, 3-1/2” at lowest level,
with a wide lift range of 3-1/2” to 16-3/4”.
• Removable handle provides 360° access to load.
• Features also include foot pedal release, locking rear casters, automatic
safety lock, and two ratcheting tie down straps for safety.
• Two-year warranty.
OTC-1545 . . . . . . . . . . . . . . . . $149.95
MOTORCYCLE & ATV LIFT
• 1,500 Lbs. Capacity
• Locking ratchet bars for greater safety
• Locking casters for greater stability
• Wide load bearing frame
• Non-slip foot pedal
• Compact size allows for easy storage
• Removable handle for convenience
• Low Profi le: Lifting Range - 4-1/2” to 16-1/2”
ATD-7460 . . . . . . . . . . . . . . . . $192.50
ATD 2-TON TRIPOD STAND
Low height 5’ 7-1/2”, High height 6’ 4”, Base 2’
ATD-7440 . . . . . . . . . . . . . $97.50
ATD 3/4-TON HEAVY DUTY
UNDER HOIST STANDS
• Meets ANSI Safety Standards
• Lifting Range: 53-5/8”–79”
• 12” Diameter Base
• Saddle Dim: 5-1/4” x 1-1/2”
ATD-7441 . . . . . . . . . $85.95
ATD-7442 . . . . . . . . . $92.95
• With Foot Pedal
Rubber Cap Included
w/ ATD-7440,
ATD-7441 & ATD-7442
HEAVY DUTY STANDS
ATD-7441
ATD-7442
ATD-7440

44
WHEEL DOLLIES
DUAL WHEEL DOLLY
• Hydraulic jack provides almost
5” of lift and tilts wheel assembly 4°
to prevent damage to wheel seal.
• Swivel casters for easy
maneuverability.
• 6’ chain holds load in place.
OTC-1770A . . . . . . . . . . . . . . . $999.00
ATD 1,500 LB.
HYDRAULIC
WHEEL DOLLY
• Lifting Range: 3”–9”
• Precision Crafted Rollers
• Overload Safety Function
• Size: 42-7/8” L x 38-1/2” W x 34-5/8” L
• Heavy Duty Tubular Construction
• ANSI Rated
• Weight: 191 lbs.
ATD-7227 . . . . . . . . . . . . . . . . $375.00
22-TON CAPACITY UNDER-AXLE JACK
WITH FREE EASY LEVER
• One pull of the handle activates the
self-retracting 22-ton capacity ram.
• Long 49” T-handle for easy positioning
under vehicles with long overhangs.
• Jack has large rubber-tired wheels.
• Lifting range: 8” min. height,
max height 17” with adapter.
Includes four adapters.
• Cylinder stroke is 4-3/4”,
PSI range is 90-145.
• Comes with FREE Easy Lever
Wheel Dolly (OTC-5096A)
OTC-1788APROMO . . . . . . . . $585.00
TRUCK AXLE JACK WITH FREE EASY
LEVER WHEEL DOLLY
• Self-retracting 25 ton capacity hydraulic ram
• Low 8-1/16” minimum working height
• Lift height w/ screw extended: 18-1/16”
• Extra long 53” handle locks in any of
3 positions: vertical, 45º, and horizontal
• Comes with FREE Easy Lever
Wheel Dolly (OTC-5096A).
OTC-5012APROMO . . . . . . $1,385.00
36 MO. LEASE . . . . . . . . . . . . . . . . . . . . $48.92
12-TON RATCHET
STYLE JACK STANDS
• Steel base for strength, self-locking ratchet
handle, durable baked enamel fi nish.
• Base: 12-5/8” x 11-3/8”
Height range: 18-1/8” to 28”.
• Stands conform to ANSI PALD-4 load rating
standard, are factory tested before shipment.
OTC-1784C . . . . . . $104.95
ATD 22-TON CAPACITY
JACK STANDS
• Base size: 9 3/4” (L) x 9 3/4” (W)
• Saddle width: 3 1/8” x 2 3/4”
• Height min: 12 1/8”, Height max: 19 7/8”
• Weight: 68 lbs. / pair
ATD-7449 . . . . . . . . $209.00
5-TON HYDRAULIC
SERVICE JACK
• Overload system prevents use
beyond rated capacity
• Low height 7”, Raised height 27”
• Length 57-3/4” • Wt. 216 Lbs.
• Patented built-in by-pass device
ATD-7390 . . . . . . . . . . $545.00
10-TON HYDRAULIC SERVICE JACK
• Low height 7”, Raised height 27”, Wt. 357 Lbs.
ATD-7391 . . . . . . . . . . . . . . . . $879.00
20-TON AIR/HYDRAULIC
SERVICE JACK
• Low height 7-1/2”, Raised height 26”
AXLE JACKS
SERVICE JACKS
5-TON SERVICE JACK
ATD-7392 . . . . . . . . . . $2,229.00
• A built-in safety overload prevents using
HWA-HW93662 . . . . . . . . . . $2,750.00
36 MO. LEASE . . . . . . . . . . . . . . . . $78.73
the jack beyond its rated capacity.
36 MO. LEASE . . . . . . . . . . . . . . . . . . . . $94.52
• Lifting range: 6” to 22”, reach: 47”.
5 & 10-TON AIR MOTOR
10-TON SERVICE JACK
• Frame height: 7-3/4”,
• Spring-loaded 40” handle, reach: 49”, saddle dia.: 6-3/8”,
CONVERSION KIT
fl oor space: 56” x 14-3/4”.
lifting range: 6-3/4” to 22”
ATD-7399 . . . . . . . . . . . . . . . . $219.95 OTC-1505B . . . . . . . . . . . . . . . . . . . $685.00 OTC-1510B . . . . . . . . . . . . . . . $859.00
HEAVY DUTY JACK STANDS
ATD 10-TON CAPACITY
HIGH LIFT JACK STANDS
• Square based structural frame for stability.
• Professional Jack Stands
• Low height 28”, High height 47”.
• Base size 16” x 16”. Ship wt. 47.4 lbs.
22-TON AIR/HYDRAULIC AXLE JACK
WITH FREE 26-WATT FLUORESCENT “QUAD” LIGHT
• ATD Air Bottle Jacks are equipped with a powerful air motor to raise load effi ciently and
safely to desired height
• Lifting Range: 9-7/8” to 20-1/4”, 2-1/2” Extension
• Holder included for storage of 2-1/2” extension
• Patented built-in by-pass device
• Size: 22-7/8” L x 12-1/2” x 9-5/8” H
• Weight: 96 lbs.
• Come with a FREE (ATD-80001) 26-Watt
Fluorescent “Quad” Light
ATD-7322PROMO2 . . . . . $595.00
2-STAGE 22/35-TON CAPACITY AXLE
JACK WITH FREE 26-WATT FLUORESCENT
“QUAD” LIGHT
ATD-7323PROMO . . . . . . $835.00
PORTABLE
UNDER-AXLE JACK
Ideal for roadside service
• Portable – only 65 lbs.
• Comes with two extensions:
2" and 3-7/8".
OTC-5225 . . . . . . . . $2,340.00
36 MO. LEASE . . . . . . . . . . . . . $82.65
ATD-7447 . . . . . . . . $236.95
12-TON CAPACITY
Low height 17-1/2”. High height 27-1/4”.
Ship wt. 60.5 lbs.
ATD-7448 . . . . . . . . $122.95
3-STAGE UNDER AXLE JACK
Three-stage lift capacity – 22, 38.5, and 71.5 tons.
Ideal for lifting loaded trailers, buses, and other
Class 7 and 8 vehicles.
• Piston and cylinders are
made from chromium
molybdenum vanadium
steel for durability and
then liquid nitrided to prevent rust and seizing.
• Features a high load-approach speed.
• Self-retracting, air-driven cylinder eliminates manual lowering.
• 4-position handle: horizontal, 45 degrees, vertical, or collapsed.
• 7-inch minimum height for low clearance vehicles. .
OTC-5093A . . . . . . . . $2,585.00
36 MO. LEASE . . . . . . . . . . . $88.85
Retail Value:
$67.99
ATD-7322
20-TON AIR OPERATED
HYDRAULIC SERVICE JACK
• Automatic valve prevents overloading
• Low height 9”, High height 19 3/4”
• 2 Year Warranty
HWA-HW93733 . . . . . $1,245.00
36 MO. LEASE . . . . . . . . . . . . . . . $43.97
20-TON TRUCK RAMPS
• Weight: 115 lbs • Long, 33” retractable T-handle
• Non-skid rubber matting
• Durable, heavy-duty rubber wheels
• Capacity per pair: 20-Tons
• Overall length: 51”; tread with: 10”
• Covered by OTC Lifetime Marathon Warranty
• Sold as a pairs
OTC-5268. . . . . . . . $589.00
10-TON HYDRAULIC SERVICE JACKS
• Forged steel hydraulic unit base is sealed
for long life and reliability
• Handle adjusts to three pumping positions
• Automatic valve prevents overloading
• Low height 5-7/8”, High height 26”
• 2 Year Warranty
AIR/MANUAL 10-TON SERVICE JACK
• Operates manually or with air • 2 Year Warranty
• Patented “speed pak” moves saddle quickly to lift position
20-TON
AIR-HYDRAULIC
SERVICE JACK
• Patented “Speed Pak” provides
effortless lift
• Automatic valve prevents overloading
• Low height 9 1/2”, High height 17 1/2”
• 2 Year Warranty
HWA-HW93731 . . . . . . . . . . . . $972.00
HEAVY-DUTY RAMPS
OTC-5269
MANUAL 10-TON SERVICE JACK
HWA-HW93660 . . . . . . . $2,340.00
36 MO. LEASE. . . . . . . . . . . . . . . . $82.65
25-TON TRUCK JACK
• 8” low height allows lifting from axle
or suspension
• 3 position handle
• 2 years warranty
HWA-HW93735 . . . . . . $1,525.00
36 MO. LEASE . . . . . . . . . . . . . . . $53.86
HEAVY-DUTY 20-TON
TRUCK RAMPS
• Powerful new design specifi cally for heavy-duty tasks
• Large 5” diameter steel wheels for extra durability
• Non-skid rubber matting enhances operation safety
• 33” long T-handle increases mobile effi ciency
• Sold in sets of 2 • Weight: 270 lbs.
ATD-7320. . . . . . . . $499.95
ATD-7320
HEAVY-DUTY 20-TON
20-TON WIDE TRUCK RAMPS WIDE TRUCK RAMP
• Weight: 341 lbs.
OTC-5269. . . . . . . . $619.00 ATD-7321. . . . . . . . $599.95
10-TON CAP. AIR LIFT JACK FOR
TRUCKS & TRAILERS WITH FREE
12-TON JACK STAND
• Lifting range is 13” to 52”, Weight: 697 lbs.
• Develops 10-Tons of lift at 200 PSI air pressure.
• An automatic mechanical safety catch engages in 5 height
positions; it must be manually released
• 2 swivel casters and pneumatic tires allows easy
maneuverability.
• Covered by the OTC Marathon Lifetime Warranty®
• Made in the U.S.A.
• Comes with FREE OTC-1778A 12-Ton
Jack Stand
OTC-1590PROMO . . . . . . . . $2,685.00
36 MO. LEASE. . . . . . . . . . . . . . . . . . . . . . $92.28
3-TON ENGINE STAND
• Mounting head tilts for engine clearance in 360 degree rotation.
• 95 to 1 worm gear drive and long handle provide easy engine rotation.
• Floor lock keeps stand from moving during repairs.
• Universal adapter included.
• Used with optional adapters.
HWA-HW93776 . . . . . . . . $3,950.00
36 MO. LEASE . . . . . . . . . . . . . . . . . $135.76
10-TON END LIFT JACK
FOR TRUCKS & TRAILERS
• Three-way heavy duty brass air valve provides
fi ne control when lifting or lowering a vehicle.
• Safety latch design provides six different automatic
safety lock positions to prevent unintentional lowering
of load.
• Heavy duty wide base for stability and strength.
• Two front swivel caster wheel and two 12” diameter
semi-pneumatic rear tires provide easy maneuvering.
• Adjustable lifting arm can be extended to
desired position
HWA-HW93690 . . . . . . . . $2,750.00
36 MO. LEASE . . . . . . . . . . . . . . . . . . $94.52
HEAVY-DUTY LIFTING & ACCESSORIES
BRAKE DRUM DOLLY
• Removes, installs, and transports truck brake drums
• Works on all 15” and 16-1/2” drums found on most class
7 and 8 tractor and trailer brake systems
• Heavy-gauge steel construction • 10” pneumatic tires
• Telescoping, adjustable handle which adjusts from 37” to 55”
• OTC Lifetime Marathon Warranty ®
• 5” height adjustment aids installation • Weight: 52 lbs.
OTC-5017 . . . . . . . . . . . . . . . . $553.25
10-TON CAPACITY COMBINATION
AIR LIFT AND SUPPORT STAND
• Air lift can also be used as a support
stand when servicing a vehicle.
• Height range of 16-1/8” to 49-1/4”.
• Removable handle and 8’ air hose.
• American-made, covered by a
Lifetime Marathon Warranty.
OTC-1591A . . . . . . . . . . . . . .$1,195.00
36 MO. LEASE . . . . . . . . . . . . . . . . . . . . $42.21
HEAVY-DUTY WHEEL STEP
• Tire-mounted wheel step provides quick, easy access to
under-hood components. • Fits heavy-duty vehicles(Class 7/8).
• Installs in seconds; adjusts to fi t 22-1/2” 24” wheel sizes.
• 300 pound capacity. • Folds for easy storage.
• Non-skid platform surface. • OTC Lifetime Marathon Warranty ®.
OTC-1734A . . . . . . . . . . . . . . . . $53.20
HEAVY-DUTY TRUCK STEP
• 400 lbs capacity
• 28” Wide
ATD-10310 . . . . . . . . . . . . . . . . $40.99
STANDARD TRUCK STEP
• 350 lbs capacity • 22-1/2” Wide
ATD-10305 . . . . . . . . . . . . . . . . $33.25
6000 LB. REVOLVER
DIESEL ENGINE STAND
• 96 to 1 ratio worm and gear set rotates
components a full 360°; handle locks in
any position.
• Includes universal mounting plate for use with
individual engine adapter plates.
OTC-1750A . . . . . $3,995.00
36 MO. LEASE . . . . . . . . . . $137.31
CLUTCH HANDLER
• 14” low point enables access below side faring
• Open Stance for easy access to work
• Unique design raises the load
to work as the pump is cycled
• 360º swivel head
• 250 lb. capacity
OTC-5018 . . . . . . . . . . . . . . $1,055.00
36 MO. LEASE . . . . . . . . . . . . . . . . . . . . $37.26
500 LBS. CLUTCH JACK WITH FREE
FLYWHEEL ADAPTER
• Handles 14” & 15-1/2” clutch assembly. removal and installation becomes a
one man operation
• 2” & 1-3/4” spline rotates 360º, turns
side to side and vertically tilts for
precise clutch alignment
• Conveniently located release valve & 360º
rotating pump handleallows precise alignment
when replacing a clutch
• 4 swivel casters maneuver jack with ease
• Min. height: 13-1/4”
• Max. height: 39”
• Dia. of Hub pilot bearing shaft: 1”
• Comes with FREE Flywheel Adapter (ATD-7405)
ATD-7404PROMO . . . . . . $767.00
Retail Value:
$142.85

45
LOW-LIFT TRANSMISSION JACK WITH FREE
MACK TRANS ADAPTER AND FREE
ADJUSTABLE GRIP ARM
2,200 lbs. Capacity Low-Lift Transmission Jack
• The 8-1/4" low height is perfect for aerodynamic trucks with low
ground clearance
• Special mounting adapter fits popular Eaton® Fuller®
RoadRanger® transmissions
• Degree of tilt: 20° back, 15° forward, 12° side-to-side
• Swiveling pump handle permits ease of operation in restricted working
spaces
• Includes a FREE OTC-221790 Mack transmission mounting brackets
and a FREE OTC-305811 AdjustaGrip® Mounting Arm
OTC-5019PROMO . . . . . . . $2,199.00
36 MO. LEASE . . . . . . . . . . . . . . . . . . . . $77.67
OTC-221790
SUPER HEAVY-DUTY DEALS
Retail Value:
$73.95
OTC-305811
TRUCK AXLE JACK WITH FREE
EASY LEVER WHEEL DOLLY
• Self-retracting 25 ton capacity hydraulic ram
• Low 8-1/16” minimum working height
• Lift height w/ screw extended: 18-1/16”
• Extra long 53” handle locks in any of 3 positions: vertical, 45º,
and horizontal
• Comes with FREE OTC-5096A Easy Lever Wheel Dolly
OTC-5012APROMO . . . . . . $1,385.00
36 MO. LEASE . . . . . . . . . . . . . . . . . . . . $48.92
OTC-5096A
Retail Value:
$165.76
10-TON AIR LIFT WITH FREE
12-TON CAPACITY JACK STAND
• Lifting range is 13" to 52".
• Weight - 697 lbs.
• Develops 10 tons of lift at 200 psi air pressure.
• Automatic mechanical safety catch engages in 5 height
positions; it must be manually released.
• Two large swivel casters and pneumatic tires make it easy
to maneuver.
• Made in the U.S.A.
• Covered by the OTC Marathon Lifetime Warranty®.
• Comes with FREE OTC-1778A 12-Ton Jack Stand
OTC-1590PROMO . . . . . . . $2,685.00
36 MO. LEASE . . . . . . . . . . . . . . . . . . . . $92.28
OTC-1778A
Retail Value:
$349.95
STINGER 22-TON CAPACITY UNDER AXLE
JACK WITH FREE EASY LEVER
WHEEL DOLLY
• One pull of the handle activates the self-retracting 22-ton capacity ram
• Long 49” T-handle for easy positioning under vehicles with long
overhangs
• Jack has large rubber-tired wheels
• Lifting range: 8” min. height, max height 17” with adapter
• Includes four adapters
• Cylinder stroke is 4-3/4”, 90-145 psi range
• Comes with FREE OTC-5096A Easy Lever Wheel Dolly
OTC-1788APROMO . . . . . . . . $585.00
OTC-5096A
Retail Value:
$165.76
3 TON LIMITED EDITION 30TH
ANNIVERSARY SERVICE JACK
WITH FREE SABERLIGHT
AND $10.00 REBATE COUPON
• USA patented bypass device prevents over pumping
• Meets ASME/ANSI-PALD Safety Standards
• Flanged side plates for extra strength
• Built-in internal safety valve ensures safe operation
• Rubber saddle pad and handle foam tube protect vehicle
• Features Swift-lift technology
• Comes with FREE ATD-80103 “Saber Light”
and a $10 Rebate Coupon Saber Light
ATD-7331XL . . . . . . . . . . . . . . $179.95
RETAIL
VALUE
$0.00
2-1/2-TON SERVICE JACK
• 5-1/2” low height; 19-1/2” high height; 73 lbs.
• Flanged side plates provide safety and long-term durability
• U.S.A. Patented by-pass device prevents over pumping
• Built-in internal safety valve ensures safe operation
• ANSI Rated
ATD-7333 . . . . . . . . . . . . . . . . $113.95
3-TON ULTRA-PRO SERVICE JACK
• Widest lifting range in its category - with a lifting range from 4” to 23”
• Exclusive Breather Plug eliminates air in the hydraulic system
• U.S.A. Patented by-pass device prevents over pumping
• ANSI Rated
• Weight: 136 lbs. SWIFT LIFT
ATD-7353. . . . . . . . $295.75 TECHNOLOGY!
2-1/2-TON LOW PROFILE
SERVICE JACK
• Lifting Range: 3-3/4” to 20”
• Rubber saddle pad and handle form a
tube to protect the integrity of the vehicle
• U.S.A. Patented by-pass device prevents
over pumping
FLOOR JACKS
SWIFT LIFT
TECHNOLOGY!
• Exclusive Breather Plug eliminates air in the hydraulic system
• 1 Pc. Handle, Length: 49-7/8”
• Weight: 98.6 LBS • Meets ANSI/asme safety standards
• Jack Size: 29-3/4” (L) X 13-1/4” (W) X 6-1/4” (H)
ATD-7352 . . . . . . . . . . . . . . . . $224.95
2-TON SERVICE JACK
• New “OTC Family” look.
• Ergonomic handle for user comfort and easy mobility.
• CE marked – ASME/PALD tested.
• Minimum clearance of 3" (2-Ton).
OTC-5202 . . . . . . . . $339.00
3-TON SERVICE JACK
OTC-5203 . . . . . . . . $509.00
OTC-5202
JACK PACK • 3-TON SERVICE JACK
WITH 3-TON JACK STANDS
INCLUDES:
• 3-Ton Service Jack
• A built-in safety overload system
• 3-ton Ratchet Style Jack Stands
• Rear swivel casters
SPECIFICATIONS:
• Lifting range 6” to 23-1/2”
• Capacity 3-ton
OTC-1500A . . . . . . . . . . . . . . . $119.95
Foot pedal for quick
approach of the lifting
saddle to load
QUICK LIFT 3-1/2-TON
SERVICE JACK
• 1 pump to load, 3 pumps to full ht. unloaded
• Extra wide lift range - from 4” to 21”
• A long 48” spring-loaded handle
• Heavy-duty construction
• Pinned 4-3/4” saddle wont lift off during use
• 2-year Limited Warranty.
OTC-1526. . . . . . . . .$179.90
OTC-1526
2-TON EXTRA-LOW PROFILE SERVICE JACK
• Wide stance and low center of gravity provides optimum stability under load stress
• Extra long low side frames designed for long reach under the car chassis
• Low-profi le design to fi t easily and safely under vehicle
• Universal joint release mechanism provides precision
control of load descent in any handle position
• Exclusively designed breather plug eliminates
air in the hydraulic system, optimizing jack performance
ATD-7325 . . . . . . . . . . . . $269.95
MANUAL 4-TON
HYDRAULIC SERVICE JACK
• Handle adjusts to three pumping positions
• Extra long chassis reaches under low overhangs
• “T” handle permits easier maneuvering
• Automatic valve prevents overloading
• Low height 5-1/4”, High height 26”
• 2 Year Warranty
SWIFT LIFT
TECHNOLOGY!
3-TON HEAVY DUTY
PRO SERVICE JACK
• Low Height: 4”, High Height: 23”
• Sealed pump, reduces risk of damage
• Ideal for use on trucks and SUV’s
• Chassis Length: 30-3/4”
• One piece T-Type handle
• 2 Year Warranty • Weight 110 lbs.
Built -in tray for fasteners and tools
2-TON SERVICE JACK
• The strongest jack frame in its class • 6-1/2” frame height
• 30” Long Chassis • 3-3/4” retracted height
• 3-3/4” to 22-3/4” lifting range, 27” overall reach
• Lifetime Marathon Warranty ®
OTC-1525. . . . . . . . .$335.00
OTC-1525
2-TON SERVICE JACK
• Low Height: 3 3/4”, High Height: 20”
• Sealed pump, reduces risk of damage
• Removable one piece handle
• Chassis Length: 26 3/4”
• 2 Year Warranty
• Weight 90 lbs.
HWA-HW93657 . . . . . $1,290.00
36 MO. LEASE. . . . . . . . . . . $45.56
AIR ACTUATED HYDRAULIC JACKS
• ATD Air Bottle Jacks are equipped with a powerful air
motor to raise load effi ciently and safely to desired height
• Heat Treated Extension screws on both models
• ANSI approved • 2 Piece Handles
• Patented built-in by-pass mechanism
• Full power in horizontal position
• 1-Year Warranty
12-TON JACK
ATD-7370. . . . . . . . .$214.95
20-TON JACK
ATD-7371. . . . . . . . .$289.00
ATD BOTTLE JACKS
ATD-7384
ATD-7371
ATD-7412
HWA-HW93652 . . . . . . . . . $559.00 HWA-HW93642 . . . . . . . . $409.00
ATD-7420
PART # CAPACITY LOW HIGH PRICE
ATD-7380 2-Ton 7-1/8” 13-5/8” $14.65
ATD-7381 4-Ton 8-1/8” 15-1/2” $18.99
ATD-7382 6-Ton 8-1/2” 16-5/8” $22.60
ATD-7383 8-Ton 8-7/8” 17-5/8” $30.75
ATD-7384 12-Ton 9-3/8” 18-1/2” $41.90
ATD-7385 12-Ton short 6” 10-5/8” $40.90
ATD-7386 20-Ton 9-1/2” 18-5/8” $54.25
ATD-7387 20-Ton short 6”-1/2 11-1/4” $57.25
ATD-7387 20-Ton short 6”-1/2 11-1/4” $57.25
ATD-7412 12-Ton 9-1/2” 18-5/8” $176.25
ATD-7420 20-Ton 9-1/2” 18-1/4” $234.95
6-TON CAPACITY
JACK STANDS
• Lifting min. 15-3/8”
• Height max. 24-1/4”
• Ship wt. 29.4 lbs.
ATD-7446. . . . . . . . $45.95
3-TON CAPACITY JACK STANDS
ATD-7443. . . . . . . . $27.95
JACK STANDS
6-TON CAPACITY
JACK STANDS
• Low Height: 15-1/2”
• High Height: 24-3/4”
• Height Intervals: 5/8”
• Base Size: 11” x 11-3/4”
• Cap Size: 1-1/4” x 4 5/8”
HWA-HW93506 . . . . . . . .$112.50
3-TON CAPACITY JACK STANDS
HWA-HW93503 . . . . . . .$74.95
6-TON RATCHET JACK STANDS
• Steel base for strength, self-locking ratchet handle, durable baked enamel fi nish.
• Stands conform to ANSI PALD-4 load rating standard; factory tested before shipment.
• Base: 11-7/16” x 10” • Height range: 15-3/4” to 24”.
OTC-1773C . . . . . . . .$47.75
3-TON RATCHET JACK STANDS
OTC-1772C . . . . . . . .$29.99