The Ingersoll Rand IQV Warranty ensures you ... - ATEC Trans-Tool

MAKITA 14” ELECTRIC
CUT-OFF SAW
• 3,800 RPM, 15 amps
• Adjustable depth stop for precise, repeatable cutting depth
• Lock-off button helps prevents accidental starting
• FREE MKT-9557PB 7.5-AMP 4-1/2" GRINDER
MKT-2414NBX2 . . . . . . . . . . . $229.95
MKT-A938595 . . . . . . . . . . . . . . $18.26
• 14 Inch Cut-Off Wheels - 5 Pack
FREE!
MKT-9557PB
7.5-Amp 4-1/2" Grinder
RETAIL VALUE: $142.00
6.0 AMP 4-1/2” GRINDER WITH
FREE GRINDING WHEELS
• Small circumference barrel grip (only 2.5”) for added comfort
• 6.0 AMP motor for high output power in a compact tool (only 3.1 lbs.)
• All ball bearing design and metal gear housing for durability
• Rotatable gear housing rotates 90° for cutting applications
• Standard Equipment: 4-1/2’’ Grinding Wheel; Wheel Guard;
Lock Nut; Lock Nut Wrench; Side Handle; Inner Flange
MKT-9554NBX . . . . . . . . . . . . . $79.95
MKT-741423-0 . . . . . . . . . . . . . . . . . . . . . $24.15
• 4-1/2” Grinder Wheel 24G - 5 Pack
4-1/2” ANGLE GRINDER
• 6.25 Amps
• 750 Watt 120 Volt
• 11,000 RPM No load speed
• Weight: 5.5 lbs.
• Disk Diameter: 4.5”
• Spindle thread: 5/8” x 11” UNC
• 78” Power Supply Cord
• CSA Approved
• Includes: Side Handle, Grinding Wheel, Wrench,
Extra Brush Set
ATD-10503 . . . . . . . . . . . . . . . . $49.95
14” ELECTRIC CUT-OFF SAW
• 15A, 120V, 60 Hz, 2000W
• Blade inner bore size: 1”
• Disk: 14” x 1/8” x 1”
• With safety switch
ATD-10514 . . . . . . . . . $139.95
6” BENCH GRINDER WITH WORK LIGHTS
• Direct drive 1/2 HP ball bearing induction motor, 3450 rpm
• (2) Flexible 15W work lights, (2) 6” grinding wheels (medium and coarse)
• 1/2” Arbor accommodates 6” wheel with up to 3/4” maximum width
• Adjustable, shatter-resistant eye shields, metal tool rests and spark guards
• Base has pre-cast holes for mounting onto workbench or stand
• Removable wheel guards for mounting of optional wheels
• 5-1/2 ft. power cord
• 120V, CSA & UL Approved • Weight 26 lbs.
ATD-10546 . . . . . . . . $64.95
8” BENCH GRINDER WITH WORK LIGHTS
• Direct drive 3/8 HP ball bearing induction motor, 3450 rpm
• 5/8” Arbor accommodates 8” wheel with up to 1” maximum width
ATD-10548 . . . . . . . . . . . . . . . . $72.95
6” HEAVY-DUTY BENCH GRINDER
• Powerful 5/8 HP induction motor for heavy-duty grinding
• Motor runs at 3,450 rpm for high speed material removal
• Cast-iron base and motor housing
• Precision-machined adjustable aluminum tool rests
allow the user to accurately position work
• AMPS (120V AC): 4.0
• Spindle diameter: 1/2”
DWT-DW756 . . . . . . . . . . . . . . $105.25
8” HEAVY-DUTY BENCH GRINDER
• 3/4 HP induction motor provides superior power for
industrial grinding applications
• Spindle diameter: 5/8”
DWT-DW758 . . . . . . . . . . . . . . $149.95
15-AMP COMMERCIAL DUTY
RECIPROCATING SAW
• 15 AMP Motor to handle the most demanding jobs
• One handed changing of the blade without burning your hand
• Shoe is adjustable to 5 different positions by the push of a button
• Clutch Protects the gears should the blade bind
• Orbital Action 4 settings to choose from for high speed cutting
• Variable Speed Preset Dial 6 settings to match the speed of the saw to the application
• Anti-Vibration Technology Counterbalance system reduces vibration to only 10 m/s2
• Comes in convenient and durable steel case
MKT-JR3070CT . . . . . . . . . . . $253.95
9-AMP HEAVY DUTY RECIPROCATING SAW
• Variable speed 0 - 2800 SPM
• 9 AMP Heavy Duty Reciprocating Saw
• One handed changing of the blade without burning your hand
• Shoe is adjustable to 5 different positions by the push of a button
• Dust and Water Proof Design - Air from the motor fan keeps dust from
entering the tool, plus rubber and felt seals keep out the dust and water for longer tool life
MKT-JR3050T . . . . . . . . . . . . . $129.95
MKT-723066A-5 . . . . . . . . . . . . . . . . . . . . $11.04
• 6” 18 TPI Metal Cutting Reciprocating Blade
“THE ORIGINAL SAWZALL ® RECIPROCATING SAW”
• Variable speed 0 - 2600 SPM • Adjustable pivot shoe
• No starting hole needed for plunge cuts into fl oor or walls
• Comes complete with case
MWK-6509-22 . . . . . . . . . . . . . $173.99
FREE!
4 GRINDING WHEELS
Retails Value:$11.65
14” ABRASIVE CUT-OFF MACHINE
• 3900 RPM
• Heavy duty cast iron base
• 5” pipe cutting capacity
MWK-6176-20 . . . . . . . . . . . . . $224.00
CUT-OFF AND CHOP SAWS
HEAVY-DUTY 4-1/2” 18-VOLT
CORDLESS CUT-OFF TOOL
• Convenient trigger switch with lock-off button for easier gripping
• 3 Position side handle offers greater comfort and control
Specifications:
No Load Speed 6,500 rpm
Spindle Lock
Yes
Spindle Thread 5/8” -11”
Use Wheels RPM Above 10,000 rpm
ANGLE GRINDERS
DWT-DC410KA . . . . . . . . . . . . $282.00
HEAVY DUTY 4-1/2” SMALL ANGLE GRINDER
• Low profi le jam-pot gear case increases durability and allows tool to fi t into tight spaces
• Oversized, protected spindle lock button provides easier and quicker wheel changes
• 5/8”-11 spindle thread accepts a wide range of 4-1/2” accessories.
BENCH GRINDERS & DRILL PRESSES
BENCH GRINDER STAND
• Designed for use with ATD-10546
and ATD-10548 bench grinders as
well as most other bench grinders.
• Multi-slotted table
for mounting fl exibility.
• Built-in cooling tray.
• Heavy, pre-drilled base for fl oor mounting.
• 30” tall.
ATD-10547 . . . . . . . . . . . . . . . . $49.95
6” BENCH GRINDER WITH LIGHTS
• Two grinding wheels (1-coarse and 1-medium)
• 1/2 HP, 120 volt, 1 phase, 60 cycle motor
• Two independently adjustable lights; Two eye shields;
Two 15-watt light bulbs; Two spark guards
• CSA & UL approved
CLA-BT1005A . . . . . . . . . . . . . . $63.75
8” BENCH GRINDER WITH LIGHTS
• Wheel sizes 8” x 3/4”, bore 5/8”
• 1 HP, 120 volt, 1 phase, 60 cycle motor
CLA-BT1006 . . . . . . . . . . . . . . . $89.95
RECIPROCATING SAWS
DEWALT 14” CHOP SAW
• 15.0 amps (3.2 hp)
• 45˚ tool-free pivoting fence allows for fast & accurate angle cuts
• Wide steel base for increased stability / bolt down to work bench
• Adjustable spark guard
DWT-D28700 . . . . . . . . . . $219.95
HEAVY-DUTY 14” CHOP SAW
W/ QUICK-CHANGE
KEYLESS BLADE CHANGE SYSTEME
• Powerful 15.0 Amp/5.5 HP (maximum motor HP) motor
• Quick-Change Blade Change System increases productivity by providing
the user the ability to change wheels without a wrench
• Large cutting capacity (5" round / 4-1/2" x 6-1/2" rectangle)
DWT-D28715 . . . . . . . . . . . . . . $259.00
4-1/2” MAG GRINDER WITH FREE 10
PACK OF 4" GRINDING WHEELS
• Spiral bevel gearing for performance and durability
• All ball and roller bearing construction
• Tool-free adjustable wheel guard
• 8.5-Amp, 10,000 RPM, AC-DC
• Max. HP: 1.6
• Cord Type: 8 ft. Fixed
• FREE 10 Pack of 4" Grinding Wheels
MWK-6148-6PROMO . . . . . . . $138.80
10 AMP HEAVY DUTY 4-1/2” SMALL ANGLE GRINDER
• Dust Ejection System ejects dust particles that enter the tool through the air intake vents
• Jam-pot, low profi le gear case provides precise gear alignment for a smoother, quieter transmission
• Quick-Change wheel release provides easier and quicker wheel removal without the need for a wrench
Specifications:
Amps:
7.0 Amps
Specifications:
Amps:
10.0 Amps
Max Watts Out:
800 W
Max Watts Out:
1,200 W
No Load Speed
11,000 rpm
No Load Speed
11,000 rpm
Use Wheels RPM Above 12,000 rpm
Use Wheels RPM Above 12,000 rpm
Spindle Lock:
Yes
Spindle Lock:
Yes
Spindle Thread: 5/8”-11
Spindle Thread: 5/8”-11”
Tool Length: 10-3/4 “
Tool Length: 11-1/4
Tool Weight:
4.10 lbs.
Tool Weight:
4.6 lbs.
DWT-D28110 . . . . . . . . . . . . . . . $79.95 DWT-D28402 . . . . . . . . . . . . . . $119.95
16 SPEED DRILL PRESS WITH
LASER CENTERING DEVICE
• 1/4 HP motor • 2.5 amp
• 5/8” chuck size • UL approved
CLA-BT1029 . . . . . .$299.00
Quality tools, precision
engineered for performance
and reliability at the factory,
shop or farm.
5 SPEED BENCH DRILL PRESS
• 1700 RPM • 2.5 amp
• 1/2” chuck size • UL Approved
CLA-BT1023 . . . . . .$109.95
VARIABLE RECIPROCATING SAW
Durable hard working unit built for long lasting use.
Includes: Saw, 5” wood blade, 3-1/4” metal blade and deluxe storage case
ATD-10530 . . . . . . . . . . . . . . . . $72.90
CLA-BT1023
HEAVY-DUTY XRP 18V CORDLESS RECIPROCATING SAW KIT
• 1-1/8" stroke length for faster cutting speed
• 0-3,000 spm for faster cutting speed
• 4-position blade clamp allows for fl ush cutting and increased versatility
• Lever-action keyless blade clamp for quick and easy blade changes
• Anti-slip comfort grip provides increased comfort and control
• XRP extended run-time battery provides long run-time & battery life
• Pivoting adjustable shoe with open top for maximum visibility
• Variable speed with trigger lock for increased blade control
Includes:
• 1 hour charger • 18V XRP battery
• Wood cutting reciprocating saw blade • Heavy-duty kit box
DWT-DC385K . . . . . . . . . . . . . $249.95
4 POSITION HEAVY DUTY RECIPROCATING SAW
• 4 Position Blade Clamp allows for fl ush cutting and increased versatility
• Powerful 10.0 Amp motor designed for heavy-duty applications
• Lever-action keyless blade clamp for quick and easy blade changing
• 0-2,800 strokes per minute and 1-1/8” stroke length deliver fast cutting
• Variable speed trigger provides improved control
DWT-DW304PK . . . . . . . . . . . $134.95
V28 SAWZALL ® RECIPROCATING SAW KIT
• Revolutionary 28-Volt Lithium-Ion Technology
• 0-2,000/0-3,000 SPM for metal or wood cutting
• Quik-Lok Blade Clamp for quick tool-free blade changes
• Gear Protecting Clutch for extreme durability
• Keyless Shoe Adjustment quickly adjusts blade depth
MWK-0719-22 . . . . . . . . . . . . . $472.00
FREE!
10 pack of
4" Grinding Wheels
CLA-BT1029
23
LASER
CENTERING
DEVICE!