Delta Power Company - Power-Hydraulik

ENGINEERING DATA Delta Power Company
4484 Boeing Drive - Rockford, IL 61109
Immersion Proof “P” Type “I” Coils
1.93
[49.1]
1.48
[37.5]
1.70
[43.1]
VOLTAGE
PART
DELTA POWER
XXXXXXXX XXXXX
1.54
[39.0]
.98
[25.0]
.64
[16.4] .57
[14.5]
.81
[20.6]
DELTA POWER
XXXXXXXX
.82
[20.8]
ORDERING INFORMATION
P - -
DELTA POWER
XXXXXXXX
DESCRIPTION
1/2 inch (13mm) I.D. Short Immersion Proof Coil.
FEATURES
One piece encapsulated design that is:
• Weatherproof.
• Immersion proof.
• Thermal shock / dunk tested.
• No external metal shell.
COIL SPECIFICATIONS
Wattage 20 Watts Nominal
Continuous Duty +/- 10% rated
Duty Rating
voltage at 120° F (49° C) ambient
Min Current for Actuation 80% of rated current at room temp.
Magnet Wire Class H or Better for all voltages
Temperature Range -40° to 392° F (-40° to 200° C)
Thermo-Plastic, resistant to
Encapsulation Material moisture, caustic solutions, fungus,
and vibrations
IA IJ ID IM
TERMINATIONS VOLTAGE
AMP Superseal - Integral IA 12 12 VDC / 1.6 Amp Yellow Lettering
Deutsch – Integral DT04-2P ID 24 24 VDC / .80 Amp Blue Lettering
AMP Jr. Timer - Integral IJ
Metri-Pack - Integral IM NOTE: Pull type valves require nut 36202070 in lieu of standard nut.
Push type valves require nut 36202071 in lieu of standard nut.
Approximate Coil Weight: .43 lbs. (.19 kg.)
Patent Pending
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone: (815) 397-6628 Fax: (815) 397-2526 E-mail: delta@delta-power.com
2.05
[52.0]
Page 656
.82
[20.8]
.75
[19.0]
.27
[6.8]
DELTA POWER
XXXXXXXX
1.60
[40.6]
.57
[14.4]
.48
[12.1]
DELTA POWER
XXXXXXXX