You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
ENGINEERING DATA <strong>Delta</strong> <strong>Power</strong> <strong>Company</strong><br />
4484 Boeing Drive - Rockford, IL 61109<br />
<strong>Power</strong> 2W<br />
DESCRIPTION<br />
8 size, 3/4-16 thread, “<strong>Power</strong>” series<br />
3/4-16 UNF-2B .562<br />
.738<br />
.002 B<br />
.001 A<br />
.375<br />
PORT ZONE<br />
R.030<br />
Ø.375 MAX PORT ZONE<br />
NOTES:<br />
15°<br />
Ø1.188<br />
Ø<br />
.816<br />
.811<br />
Ø<br />
.689<br />
.685<br />
20°<br />
.502<br />
Ø<br />
.500<br />
-B-<br />
1.) CAVITY CAN BE MACHINED WITH<br />
DELTA FORM TOOL #40500005.<br />
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described<br />
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.<br />
Phone: (815) 397-6628 Fax: (815) 397-2526 E-mail: delta@delta-power.com<br />
45°<br />
32<br />
2.) ALL MACHINED SURFACES TO BE<br />
FINISH OR BETTER, EXCLUDING THREADS.<br />
3.) IT IS VERY IMPORTANT THAT VALVE CAVITIES<br />
MEET ALL DIMENSIONAL AND QUALITY<br />
30°<br />
.001 A<br />
.001<br />
THREADS MUST BE PERPENDICULAR TO THE SPOTFACE<br />
.002 B<br />
IMPROPERLY MACHINED CAVITIES CAN LEAD TO CARTRIDGE<br />
.002 B<br />
.031 REFERENCE TYPICAL<br />
32<br />
.115<br />
.100<br />
STANDARDS OF CONCENTRICITY AND PERPENDICULARITY.<br />
SURFACE. SPOTFACE MUST CLEAN UP TO FULL DIAMETER.<br />
MALFUNCTION AND/OR FAILURE FROM DISTORTION.<br />
Page 625<br />
.800<br />
.860<br />
1.125<br />
-A-
Change language