skybar ONE Wine System Manual - BeverageFactory.com

More documents

Recommendations

Info

TROUBLE- SHOOTING Troubleshooting Your Wine System has been carefully designed to give you many years of trouble-free service. In the unlikely event that your Wine System does not operate satisfactorily, please review the following potential problems and try the steps recommended BEFORE you call an authorized service center. To order replacement parts or for additional help with product questions, please call 1-888-SKYBAR9 (1-888-759-2279). Problem Power 1. The Wine System does not turn on. 2. The Wine System turns on, but an individual chamber is not working. 3. Lights are flashing. Controls 4. Nothing is displayed on the control panel. Dispensing/Pouring 5. Pressing the Replace Bottle Button does not release the Bottle Pour Assembly. Recommended Steps • Ensure that the Wine System is plugged into an outlet. • Ensure that the outlet has power. • Ensure that the individual chamber power buttons are “ON”. • Ensure that the individual chamber power button is on. • Open and close the Chilling Chamber door to reset. • Remove the Bottle Pour Assembly and wash it thoroughly then replace. • Press the Set Button. • Ensure that the Main Power Button is on and that there is power to the unit (See No.1). • Open door first, press and hold the Replace Bottle Button, reach into the Chilling Chamber and gently pull the Bottle Pour Assembly toward you. 18
TROUBLE- SHOOTING Problem Dispensing/Pouring 6. Wine does not pour when the Pour Button is pressed. 7. If the chamber you are trying to pour from still is not pouring. Recommended Steps • Ensure that the wine bottle is installed correctly onto the Bottle Pour Assembly and that the Bottle Pour Assembly is securely engaged into the Chilling Chamber (see page 8). • Ensure that the Pour Tip is installed onto the Pour Spout properly and is securely tightened. • Press the Pour Button when the green light is illuminated. • Note: If the green light is not illuminated and the amber light is illuminated, press the Preserve/ Unlock to Pour Button, which will stop preservation, turn off the amber light and enable pouring, indicated by the green light (see page 14). • Wine will not dispense if the chamber or another chamber is actively in the preservation mode. – Wait for the preservation cycle to be completed within the chamber in which that function is in-process, or – Cancel the preservation process by pressing the Preservation Button of that chamber where vacuum is being created. • Wait for the preservation cycle to be completed within the chamber in which that cycle is in-process. • Or to cancel the preservation process press the Preservation Button of that chamber(s) where vacuum is being created.The preservation button(s) will have a flashing amber light simply press the button(s) it to stop preservation. This then should enable you to pour from any chamber. 19 skybarhome.com
Page 2 and 3: SAFEGUARDS Important Safeguards To
Page 4 and 5: WELCOME WELCOME Conceived as a styl
Page 6 and 7: PARTS Wine System Diagram of Parts
Page 8 and 9: SETUP • After having fully insert
Page 10 and 11: INSTALLING BOTTLES 5. Uncork the bo
Page 12 and 13: SETTING THE TEMPERATURE Selecting t
Page 14 and 15: CHANGING TEMPERATURE SCALE Changing
Page 16 and 17: CARE AND CLEANING A Note About Wine
Page 20 and 21: TROUBLE- SHOOTING Problem Dispensin
Page 22 and 23: USER SERVICING SECTION User Service
Page 24 and 25: WINE NOTES 24
Page 26 and 27: WARRANTY One-Year Limited Warranty
Page 28: © 2008 Sunbeam Products, Inc. doin

skybar ONE Wine System Manual - BeverageFactory.com

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?