Swarovski Zirconia

Swarovski
Zirconia
for sparkling moments
Lenses with Swarovski Zirconia

A sparkling feature
Optiswiss lenses visibly gain enhanced value through a perfect finishing touch with high-quality Swarovski
Zirconia stones. From standard lenses, these lenses are transformed into a luxurious lifestyle object that can be
used everyday or to add a touch of glamour during the festive season.
Seductively beautiful and truly eye-catching.
A passion that combines
Swarovski and Optiswiss – two companies whose passion for perfection and innovation has led to global
success. For more than 100 years, the name Swarovski has stood for imagination, creativity and technical
expertise. For over 70 years, Optiswiss has been dedicated to the production of high-quality lenses.
Swarovski ZIRCONIA – Brilliance in diamond-quality
Pure Brilliance Zirconia from Swarovski represents sheer perfection thanks to scientific innovation. Through
a highly technological and unique cutting process, the Zirconia stone is cut in such a way that it is comparable
to the highest quality diamond. In order to guarantee 100% authenticity and quality assurance, every stone
has been engraved with a microscopic Swarovski Zirconia seal.
Guarantee of quality and authenticity
Swarovski Zirconia with an authenticity seal

Unique quality and precision
The fundamental aim of Optiswiss is using precision technology to create innovative products of an exceptional
quality and therefore guarantee maximum customer satisfaction. This means that only highly-modern,
automated machines are used to produce the glass and insert holes.
The Swarovski Zirconia stone is manually set by our qualified ophthalmic expert team.
Positioning
90º
X: -19.23
Y: 5.87
0‘
• Safety margin from the glass edge to the inserted
hole 3 mm
• A maximum of one stone per lens
• Only temporal positioning of the stones
on a maximum of 20% of the lens
• Placing of the stones also possible for drilled rims
(min. 3 mm distance from the hole)
• Minimum glass thickness of stone:
– for a 1.5 mm stone size: 2.0 mm
– for a 2.0 mm stone size: 2.5 mm
• Delivery takes place for uncut finished lenses
Glass materials
The following glass types can be tipped with precious stones:
RX-single vision lenses
Progressive lenses
ORGA 160 / ORGA 160 Transitions
be 4ty+ HD5 ORGA 160 / be 4ty+ HD5 ORGA 160 Transitions
be 4ty+ HD1 ORGA 160 / be 4ty+ HD1 ORGA 160 Transitions
be 4ty+ HD0 ORGA 160 / be 4ty+ HD0 ORGA 160 Transitions
Stone sizes
Stone Size Preset
swarovski Zirconia 1.50 mm White gold (18 carat)
swarovski Zirconia 2.00 mm White gold (18 carat)

Orders made exclusively through the osshop
Please log into our online shop (www.osshop.com). New customers can register without obligation. There
you will find the heading "Swarovski Zirconia" where all possible glass types are listed.
STEP 1
Click on the desired type of glass and enter your
customer reference and recommended value.
STEP 2
For perfect results we recommend that you draw the
desired glass shape using the graphics tablet.
We would like to point out that the use of standard
shapes may lead to variations.
Please record the centric data before you indicate the
stone size(s) and glass side(s).
STEP 3
The positioning of the stone is only temporally
possible within the pre-determined bright area. Using
the mouse you can pull the stone to the desired
position.
If the stone is sitting correctly, please save the data
and complete your order.
Optiswiss AG • Lyon-Strasse 26 • CH-4053 Basel
T +41 (0)61 337 15 15 • F +41 (0)61 337 15 02
info@optiswiss.com • www.osshop.com