Testing Machines and Systems for Metals

Measurement and
control electronics
Analog dial display for reading
the absorbed impact energy
and angles and intelligent digital
display for the direct reading of
the absorbed impact energy
Electronic measurement and
evaluation unit ImpactWin for
instrumented impact tests.
User software testXpert for the
test data administration.
Features
Easy exchangeability of tubs,
supports and counter-supports.
Pendelum impact tester Zwick 5113
Pendelum impact tester Amsler RKP 450
Exchangeable pendulum
hammers for different types
of test and energies.
Technical data
See table pendulum impact testers
Drop Impact Testers
The Amsler drop impact testers
are impact test systems for the
performance of impact penetration,
notched bar impact and tear tests
in the range up to 800 J and 19 m/s
or up to 2.000 J and 21 m/s. More
fields of application are opened up
Drop impact tester Amsler IFW 420
Creep testing machines (DSM)
by using temperature chambers,
high speed options and various
test tools.
Measurement and
control electronics
Computer-controlled with the
control electronics ImpactWin ® and
the testXpert ® software for the test
control, data backup, readout and
analysis.
Technical data
See table drop impact testers (IFW)
Creep testing machines
Creep testing machines are used
for two tasks:
For the long period creep test.
Here, the strain-time behaviour
at constant force and constant
temperature is determined.
For the relaxation test. Here, the
force-time behaviour at constant
strain and constant temperature
is determined.
The tests can be carried out at
temperatures from -196 to +1,200
(+1,500) ºC and in environments
such as air, inert gas or vacuum.
Series/type DSM 6102 DSM 6100-F
Force application by Servomotor Spring
Type of test creep/relaxation creep/relaxation
Load frame/spring nom. force, kN 50 - 500 5/10/25/50
Screw stroke, mm ± 100 ± 100
Adjustment speed, mm/min max. 20 max. 40
Working area height, mm 1000
Max. power consumption, kVA 2 0.45
29