Pro Nadelbettadapter - ProMik

Semi-Automatic In-Circuit
Programming Station
Bed-of-needles adapter for up to 4 units
ProMik GmbH offers you professional semi-automatic
programming stations suitable for in-circuit programming
in your production. Microcontrollers of different
manufacturers are supported (Freescale/Motorola, ST
Microelectronics, Renesas, NEC, Fujitsu, etc.).
These semi-automatic programming stations mainly consist
of the following components: bed-of-needles adapter
(see Picture 1), a PC with serial interface and a digital
I/O-card. Contact to your target board is achieved through
the bed-of-needles. The control software runs on a
PC with Windows. Up to four autonomous MSP68XX
Programmers simultaneously program the plugged units.
Communication between the PC and the Programmer
is through a standard serial interface (RS232).

Semi-Automatic In-Circuit
Programming Station
Adapter with an additional stamping unit Interface connectors on the adapter rear side
PC Control Software for a System with 3 Programmers
Technical data
• mechanical changeable adapter
with parallel closing pressure mechanic
• robust and durable mechanic,
cover with damper
• the housing can be opened
for debugging purposes
• ease of use due to the slanted housing
• suitable for up to 4 MSP68XX
Programmers
• expandable to a tandem system
(2 adapters can work in parallel
controlled through only one control
software, thus up to 8 programmers
can do their tasks simultaneously)
• handling and visualization is done
through 3 push-buttons/status lamps
red/yellow/green (in conjunction
with the control software running
on the host system
e.g. green lamp = programming OK,
red lamp = programming failed,
green push-button = start the
programming task,
red push-button = confirm failed
programming attempt)
• cover interlock while the programming
task is running, to prevent accidental
opening
• quick and easy changeover for different
units (3 knurled screws for the
bed-of-needles and 2 knurled screws
for the cover with holding down
elements)
• interfaced through a 96-pole
VG-connector, standard 192 test points,
expandable for up to 384 test points
• customized interface
• mech. dimensions:
530 x 450 x 330 mm (B x T x H)
• max. usable area:
350 x 230 mm (B x T)
ProMik Programmiersysteme
für die Mikroelektronik GmbH
Südwestpark 100
90449 Nürnberg, Germany
Telefon +49 911-252665-0
Telefax +49 911-252665-66
info@promik.com
www.promik.com