vault doors

123456connection to the alarm system with cable run through the hingepreparation to install a door monitoring systemswitch-set for monitoring the door (optional)basement for noise detector and cable connectorcable connector (optional)Paxos module basis (optional)Security systemsVault doors – Security systemsSecurity systemsPreparation for alarm connectionPreparation to install alarm detectors acc. to VdS-regulationsSwitch-set for monitoring the doorBoltwork door protectionDrill and torch protectionDiamond core drill protection (KB)EWT 085FWT 085GWT 150HWT 150IWT 150--HWT 150 KBIWT 150 KBJWT 220 KBKWT 300 KBLWT 300 KBstandardoptionPreparation for alarm connectionCable run through the door-frame and the upper hinge into the boltwork-room, with a leader cable forhelp.Preparation to install alarm detectors according to VdS regulationsIn the boltwork room basements for noise detectors and magnetic switches according to VdSregulations are prepared.Switch-set for monitoring the doorSet of VdS approved alarm switches and connectors, to enable a correct monitoring of the lockingstatus of the door. The installation should be done by authorized alarm companies.Boltwork door protectionAs a protection against manipulation and sabotage, the inner door cover is secured by the main locksof the vault door and by two locks.Drill and torch protectionThe boltwork is protected by special layers against attacks with mechanical and thermic tools.Diamond core drill protectionThe door is protected against attacks with crown drills.8