Firebox SSL VPN Gateway Administration Guide - WatchGuard ...

Administering the Firebox SSLNorton Personal FirewallIf you are using the default Norton Personal Firewall settings,you can simply respond to the Program Control alerts the firsttime that you attempt to start the Secure Access client or whenyou access a blocked location or application. When you respondto such an alert, choose the Permit action, select Always usethis action, and click OK.If you have changed the default firewall settings, you mightneed to manually configure the following settings in order toreach the Internet and the resources allowed by the Firebox SSL.To configure the settings, open the Norton Personal Firewallwindow and choose the following tabs.NetworkingProgramsYou might need to add the following as trusted zones:-The IP address of the Firebox SSL-The IP address or range of allowed resourcesClick Add and enter the IP address(es).You might need to grant access to individual applications. ClickAdd and then browse for and select the application. Whenprompted, choose Permit.Sygate Personal Firewall (free and Pro versions)Each time that the Sygate Personal Firewall encounters newactivity for which it does not have a rule, it displays a prompt.To grant access to the applications and locations that you willaccess through the Secure Access client, select the Remembermy answer check box and click Yes when the prompt appears.Tiny Personal FirewallThe following Tiny Personal Firewall settings enable the SecureAccess client to reach the Internet and the resources allowed bythe Firebox SSL.NOTEOne method to configure Tiny Personal Firewall is to respondto the prompts displayed when the firewall encounters newactivity for which it does not have a rule. The followinginformation assumes that you do some pre-configuration ofthe firewall before installing the Secure Access client.28 Firebox SSL VPN Gateway Administration Guide