Modelling of reciprocating and scroll compressors Modélisation des ...

886 M.-E. Duprez et al. / International Journal of Refrigeration 30 (2007) 873e886It is also possible to determine one set of parameters forall the refrigerants and for a given compressor.It must also be noticed that the isentropic and electricalefficiencies that are used for the determination of the powerhave no real physical sense (the use of parameters with physicalsense leads to an over-parameterised model). This lackof physical sense can explain the higher discrepancies athigh temperatures.References[1] H. Rivoalen, Heat Pump Market Overview in Europe, HandsonExperience with Heat Pumps in Buildings, Workshop ReportHPC-WR-23, Arnhem, The Netherlands, October 2001.[2] C.D. Pérez-Segarra, J. Rigola, A. Oliva, Modelling andnumerical simulation of the thermal and fluid dynamic behaviourof hermetic reciprocating compressors. Part 1: theoreticalbasis, HVAC & R Research 9 (2) (2003) 215e235.[3] J. Rigola, C.D. Pérez-Segarra, A. Oliva, Modelling andnumerical simulation of the thermal and fluid dynamic behaviourof hermetic reciprocating compressors. Part 2: experimentalinvestigation, HVAC & R Research 9 (2) (2003)237e249.[4] J. Rigola, C.D. Pérez-Segarra, A. Oliva, Parametric studies onhermetic reciprocating compressors, International Journal ofRefrigeration 28 (2005) 253e266.[5] J. Rigola, C.D. Pérez-Segarra, A. Oliva, J.M. Serra, M.Escribà, J. Pons, Advanced numerical simulation model ofhermetic reciprocating compressors, Parametric study anddetailed experimental validation, in: Proceedings of the 15thInternational Compressor Engineering Conference at PurdueUniversity, USA, 2000, pp. 23e30.[6] J.M. Corberan, J. Gonzalvez, J. Urchueguía, A. Calas, Modellingof refrigeration compressors, in: Proceedings of the 15thInternational Compressor Engineering Conference at PurdueUniversity, USA, 2000, pp. 571e578.[7] M.L. Todescat, F. Fagotti, Thermal energy analysis inreciprocating hermetic compressors, in: Proceedings of theInternational Compressor Engineering Conference at PurdueUniversity, USA, 1992, pp. 1419e1428.[8] P. Popovic, H.N. Shapiro, A semi-empirical method for modellinga reciprocating compressor in refrigeration systems,ASHRAE Transactions 101 (1995) 367e382.[9] E. Winandy, O.C. Saavedra, J. Lebrun, Simplified modellingof a open-type reciprocating compressor, International Journalof Thermal Science 41 (2002) 183e192.[10] M. Grodent, J. Lebrun, E. Winandy, Simplified modelling ofan open-type reciprocating compressor using refrigerantsR22 et R410A. 2nd part: model, in: Proceedings of the 20thInternational Congress of Refrigeration, Sidney, vol. 3, 1999(paper 800).[11] C. Hannay, J. Lebrun, D. Negoiu, E. Winandy, Simplifiedmodelling of an open-type reciprocating compressor usingrefrigerants R22 et R410A. 1st part: experimental analysis,in: Proceedings of the 20th International Congress of Refrigeration,Sidney, vol. 3, 1999 (paper 657).[12] D.I. Jähnig, D.T. Reindl, S.A. Klein, A semi-empiricalmethod for representing domestic refrigerator/freezer compressorcalorimeter test data, ASHRAE Transactions 106(2000) 122e130.[13] J.-L. Caillat, S. Ni, M. Daniels, A computer model for scrollcompressors, in: Proceedings of the International CompressorEngineering Conference at Purdue University, USA, 1988,pp. 47e55.[14] Y. Chen, N.P. Halm, E.A. Groll, J.E. Braun, Mathematicalmodelling of scroll compressors. Part I: compression processmodelling, International Journal of Refrigeration 25 (2002)731e750.[15] Y. Chen, N.P. Halm, E.A. Groll, J.E. Braun, Mathematicalmodelling of scroll compressors. Part II: overall scroll compressormodelling, International Journal of Refrigeration 25(2002) 751e764.[16] C. Shein, R. Radermacher, Scroll compressor simulationmodel, Journal of Engineering for Gas Turbines and Power123 (2001) 217e225.[17] E. Winandy, O.C. Saavedra, J. Lebrun, Experimental analysisand simplified modelling of a hermetic scroll refrigerationcompressor, Applied Thermal Engineering 22 (2002)107e120.[18] Performance Rating of Positive Displacement RefrigerantCompressors and Compressor Units, ARI Standard 504,Air-Conditioning and Refrigeration Institute, Arlington,2004.[19] REFPROP, NIST Standard Reference Database 23, Version 7.0.[20] Bitzer e Software, .[21] Copeland Selection Software Select, .[22] Products datasheets, .