P111 LED P109 LED - CU Phosco

ProductP111LEDLight source Philips LUXEON ® ES LEDsNumber of LED 18, 24*Power 56W*Main voltage 120-277 V / 50-60 HzSurge protection Lantern is protected to ANSI C62.41.2 high exposure 10kV, 10kA levelDriverPhilips Xitanium LED Programmable DriverDrive current 700mA* ( programmable 200mA - 700mA )Lifetimein excess of 60,000 hours (L70 at 25ºC)* Standard configurationCCT 5700K 4000K 3000K111Relative SpectralDistributionvs.WavelengthCharacteristics0.80.60.40.20350 400 450 500 550 600 650 700 750 800Relative Spectral Power Distribution0.80.60.40.20350 400 450 500 550 600 650 700 750 8000.80.60.40.20350 400 450 500 550 600 650 700 750 800Wavelength nmWavelength nmWavelength (nm)Colour Cool white Neutral white Warm whiteTypical CRI 70 65 85Minimum CRI 60 60 80Lantern Configuration for lower initial costNumber of LEDCurrent(mA)Power(W)Flux(lm)5700K 4000K 3000KEfficacy(lm/w)Flux(lm)Efficacy(lm/w)24 700 56.1 4037 72.0 3565 63.5 3140 56.018 700 42.0 3103 73.8 2740 69.1 2414 57.4Flux(lm)Efficacy(lm/w)Lantern Configuration for higher efficiencyNumber of LEDCurrent(mA)Power(W)Flux(lm)5700K 4000K 3000KEfficacy(lm/w)Flux(lm)Efficacy(lm/w)24 700 56.1 4037 72.0 3565 63.5 3140 56.024 650 51.9 3867 74.5 3455 66.5 3005 57.924 600 47.9 3677 76.8 3318 69.3 2857 59.724 550 44.0 3465 78.8 3155 71.7 2696 61.324 500 39.8 3236 81.3 2966 74.5 2521 63.324 450 35.8 2989 83.6 2756 77.1 2333 65.324 400 32.3 2724 84.5 2525 78.3 2130 66.024 350 28.5 2444 85.6 2273 79.7 1914 67.124 300 24.9 2146 86.0 2004 80.4 1685 67.624 250 21.0 1832 87.3 1717 81.9 1443 68.824 200 17.0 1502 88.3 1412 83.0 1187 69.8Flux(lm)Efficacy(lm/w)V1-0412All luminaire flux figures are from luminaire, not LED

Photometric data20m24 x Asymmetric T-DW lens24 x Asymmetric T-DW lens(12 each direction opposing)16 x Asymmetric T-DWand 8 x Asymmetric T-DN lenses10521521521-20m-15m 6m mounting height 15m24 x asymmetric T-DN lens24 x asymmetric T-DW lens(12 each direction opposing)20 2010 10552121Luminaire DLOR 100%Luminaire ULOR 0%1.05P111LED Lumen maintenance prediction(Based on LUXEON document DR04 05/09/11)1Normalised Light Output0.950.90.850.80.75700mA 5700K 6 panel 25C TM-21 LED data700mA 5700K 6 panel 25C extrapolated data700mA 4000K 6 panel 25C TM-21 LED data700mA 4000K 6 panel 25C extrapolated data700mA 3000K 6 panel 25C TM-21 LED data700mA 3000K 6 panel 25C extrapolated data0.70.651 10 1001000's of hoursV1-0412

Xitanium LED driver dimming options1-10VThis is the traditional way of dimming a driver from 100% to 10% based ondimmer voltage.DALIUsing DALI, it is possible to send dimming commands (1-254 levels), set faderates and fade times, query driver or LED status in addition to other features.Xitanium LED driver programming optionsConstant Light Output (CLO)Current traditional lighting sources (HPS, QMH and CMH) depreciate in lightoutput during the life of the product. The CLO feature of the driver enablesdesigners to create solutions with LEDs that deliver constant lumens throughthe life of the product. Based on the type of LEDs used, heat sinking and drivercurrent, we can estimate the depreciation of light output for specific LEDs andthis information can be entered into the driver using the 16 point CLO interface.The driver will increase current based on this input to enable CLO. This featurecan be used to reduce the energy consumption over the life of the installation.LightNon-CLO initial levelCLO Required light levelLife time (h)16 programmable stepsEnd of lifeIntegrated DynadimmerThis driver incorporates the Dynadimmer feature which it allows dimming topredefined light levels based on the ON time duration of the driver. Its primaryuse is for outdoor night applications, where the light level may be reduced duringnon-peak hours. With flexibility in setting time and light levels, we can configurethe driver for specific locations and applications. Using Integrated Dynadimmer,we can set 5 light levels and associated time frames. The driver does not havea real time clock. Instead it calculates a “virtual clock time”, determined by theduration of operation of the driver in the night. After 3 valid “ON-times,” thedriver will be able to calculate the virtual clock time. A valid ON-time is definedas the time for which driver operates continuously for ≥ 4 hours and ≤ 24 hours.After learning driver ON-time for 3 consecutive days, the dim profile takes effectfrom the 4th day onwards.AmpDim(Special order only)AmpDim is a programmable feature integrated in the driver. It enables cabinetbased intelligent dimming without the need for additional control wires orinfrastructure changes. A cabinet controller signals to the driver to lower thelight output via a reduction in the amplitude of the mains voltage. The intelligenceembedded in the LED driver allows for a pre-programming of multiple dimminglevels based on the amplitude of the mains voltage. Historically, mains dimmingwas used on magnetic ballasts to dim conventional lamps. By lowering themains voltage, a proportionate reduction in light output was achieved. Until nowelectronic ballasts were not able to replicate this function.LifetimeThis driver is designed to provide a life time of 100,000 hours at ≤ 70° C TC and50,000 hours at ≤ 80° C TC with min. 90% survivals.V1-0412