4 - ARMO GLOBAL
4 - ARMO GLOBAL
4 - ARMO GLOBAL
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Dear Readers,<br />
Welcome to this year’s second issue of <strong>ARMO</strong><br />
NEWS. The issue is sponsored by Orenda<br />
Automation Technologies Inc.<br />
In this issue, I intend to bring you even further into the<br />
global, international world of <strong>ARMO</strong>, so that you can learn<br />
more about the organisations it brings together, the people<br />
involved in the activities of <strong>ARMO</strong>, the type of work they do,<br />
as well as the final outcomes of their activities.<br />
In the first part of this newsletter, as usual, I share with<br />
you the news from the world of rotomoulding and the<br />
updated calendar of events organised by individual <strong>ARMO</strong><br />
associations. The New President of the Association of<br />
Rotational Moulders of Southern Africa (ARMSA), in his<br />
opening address presents the people from the organising<br />
committee of ARMSA and the most immediate plans for his<br />
organisation. Make sure you check out Mr. Clive Robertson’s<br />
remarkable, truly “rotomoulding” resume.<br />
France’s first Plastic EcoDesign<br />
Center in Lyon organizes its<br />
Open Doors Day<br />
Officially the Center was set up in November 2009. It was<br />
created to promote research and development, organize<br />
trainings and also give advice to companies of the Plastic<br />
& Composite processing industry. In 2010 the Plastic<br />
EcoDesign Center was enlarged by more than 400 m2 of<br />
exhibition surface. On the 4-th of May 2010 the Center<br />
organizes its “Open Doors Day” in Lyon. The French Member<br />
of the <strong>ARMO</strong> – AFR will be involved. The organization<br />
will present the materials and the samples of the rotational<br />
moulding technology.<br />
4<br />
photo: courtesy of ICO Polymers<br />
Moving on, the highlight of this issue is the article by Mr.<br />
Ian Hansen on the new specification of the funnel, officially<br />
named by the Board of <strong>ARMO</strong> as the “<strong>ARMO</strong> funnel”. <strong>ARMO</strong><br />
has no doubt that the standardisation of the funnel will<br />
improve the quality of the rotational moulding technology.<br />
In turn, the “Supplier’s Corner” presents an interesting<br />
article on the psychology of colour, written by Mr. John<br />
Steel of Ico Polymers, featuring extraordinary photographs.<br />
Further pages present descriptions of industry events<br />
to be held soon by the member-organisations of<br />
<strong>ARMO</strong>, including the series of events held by the French<br />
organisation AFR at the first facility of its kind in France, the<br />
modern Plastic EcoDesign Center in Lyon. You are welcome<br />
to participate!<br />
Wishing you a pleasant read, I encourage you to<br />
send me your reflections and comments,<br />
Anna Walorek-Iwanowska<br />
<strong>ARMO</strong> Secretariat Manager