Non-contact Current & Voltage DetectorsVoltage DetectorsA range of voltage and current detectors with features includingadjustable sensitivity and built-in flashlight.401050Featuring Model VT30AC/DC Voltage TesterLarge 3 digit LCD Voltage display, Stepped Voltageindicators, and Polarity indicationLow Impedance TestPush button test quickly identifies phantom voltagesPhase Rotation TestTests phase orientation of three phase power sourcesCAT IV RatingHighest safety available for maximum protectionAC/DC Voltage DetectorNon-contact and Contact detectionof AC Voltage• Contact AC Voltage from 70 to 250 VAC• Non-contact AC Voltage from 70 to 600VAC• Contact DC/Polarity Checkfrom 1.5 to 36VDC• Continuity Check from 0 to 5MΩ• Self Test insures proper batteryinstallation and battery life• 1 year warranty; CE approved• Dims: 5.6x0.6x0.6" (142.2x15.2x15.2mm)Weight: 0.7oz (19.8g)• Complete with two button batteriesEasy to read LCD displayand bargraph clearlyshows test results.DA30Meters with Built-in Voltage DetectorEX300 Series - MiniMultiMeters (p. 29)MA120 & MA150 - MiniClamp Meters (p. 20)DM220 - PocketMultiMeter (p. 35)381676 - Pocket PenMultiMeter (p. 34)Non-Contact CurrentDetectorLocates current in hidden wiresand cables up to 1000A• Detects AC Current (200mA to 1000A)through shielded wires, conduit, and metalcircuit breaker or junction boxes• Sensitivity adjustment• Audible and visible indication• CAT III-600V; CE approved; UL listed• Dims: 5.7x1.1x1" (145x28x25mm)Weight: 1.6oz (45g)• Complete with pocket clip and fourLR44 button batteries; 1 year warrantyAccessories:CA895 ...Vinyl pouch case (fits Voltage and Current Detectors)38<strong>Extech</strong> Instruments: The brand of choice…
Non-contact Current & Voltage DetectorsDV2040130 DV30000000$xxxAC Voltage DetectorNon-contact detectionof AC Voltage up to 600VAC• Detects AC Voltage from 100V to 600V• For use on 50/60Hz circuits• Tip fits into outlets or againstwire insulation• Flashing red LED light and push buttonON/OFF Audible beeper indicator• Locate breaks in power cables• CAT III-600V; CE approved, UL listed• Dims: 6x0.75x1" (152x19x25mm)Wt: 2oz (57g)• Complete with pocket clip andtwo AAA batteries; 1 year warrantyAC Voltage Detector/FlashlightNon-contact detection of AC Voltage upto 600VAC plus a built-in flashlight• Rugged, double molded housing• Detects AC Voltage from 100V to 600V• Suitable for outlets or against wireinsulation testing• Red LED light indicator• For use on 50/60Hz circuits• CAT III-600V; CE approved, UL listed• Dims: 6.25x1" (159x25mm)Wt: 1.5oz (42g)• Complete with two AAA batteries;1 year warrantyAdjustable AC VoltageDetectorNon-contact detection of AC Voltage downto 12VAC with Sensitivity adjust• Detects AC Voltage from 12V to 600V• Sensitivity adjustment increases orreduces sensor trigger threshold• Audible and visible voltage indication• Self test function• CAT III-600V; CE approved, UL listed• Dims: 6.1x1.1x1" (155x28x25mm)Wt: 1.5oz (42g)• Complete with pocket clip and fourLR44 button batteries; 1 year warrantyMeasures Currentthrough conduitDVA30Now withPhase FunctionVT10Now withPhase FunctionVT30Non-Contact ACVoltage and CurrentDetectorDetects and pinpoints wide range Voltageand Current with Sensitivity adjust✓The only two-in-one AC Current (200mAto 1000A) and AC Voltage (12V to 600V)detector designed for electrical testing• Loud audible and bright visible currentand voltage detect indicators• CAT III-600V; CE approved, UL listed• Dims: 7.6x1.2x0.9" (192x31x24mm)Weight: 2.1oz (60g)• Complete with four AG13 buttonbatteries and pocket clip; 1 year warrantyMultifunctionVoltage TesterVoltage, Continuity and Phase Tester withFlashlight; Double molded IP64 housing• LED AC/DC voltage indication:AC: 24, 48, 120, 208, 240, 277, 480, 600DC: 6, 12, 24, 36, 48, 110, 220, 400• Polarity detection with LEDs for positiveand negative DC; Continuity beeper; lowimpedance✓Phase rotation test for motors✓IEC1010-1 CAT IV 600V and CAT III1000V safety rating, CE approved• Dims: 9.4x3x1.6" (240x78x40mm)Wt: 8.4oz (237g)• Complete with 2 AAA batteries, protectivecap, and pouch case; 1 year warrantyDigital Voltage Testerwith BargraphVoltage, Continuity and Phase Tester withFlashlight and backlit digital display withbargraph; Double molded IP64 housing✓Large backlit LCD display• AC Voltage from 0 to 480V;DC Voltage from 0 to 690V• Polarity detection with LEDs for positive andnegative DC; Continuity beeper; low impedance✓Phase rotation test for motors✓IEC1010-1 CAT IV 600V and CAT III 1000Vsafety rating, CE approved• Dims: 9.4x3x1.6" (240x78x40mm)Wt: 8.4oz (237g)• Complete with 2 AAA batteries, protective cap,and pouch case; 1 year warranty…trusted by the professionals. 39