GMG Catalog

Metal-Clad and HeatExchanger GasketsGarlock manufactures a wide variety of heatexchanger and metal-clad gaskets. Among the mostrequested styles are double-jacketed gaskets,Kammprofile, corrugated gaskets, and solid gaskets,all available in a choice of metals and filler materials.Custom configurations of heat exchanger gasketsare also available. Spiral windings can bedesigned with or without partitions welded to thewinding, or inner and outer rings with welded partitions.Contact Garlock for all of your heat exchangergasket needs.TolerancesGasket Inside OutsideOutside Diameter DiameterDiameter Tolerance ToleranceUp to 6" +1/32" / -0 +0 / -1/32"6" to 60" +1/16" / -0 +0 / -1/16"60" and above +3/32" / -0 +0 / -3/32"Gasket WidthsGasket Minimum Width MaximumDiameter (Gasket and Ribs) WidthUp to 12" 3/16" *Over 12" 1/4" ** Note: There is no maximum width for heat exchanger gaskets.Thickness: ±1/64" Radii: ±1/16"Rib Width: ±1/64" Rib Location: ±1/16"WARNING:Properties/applications shown throughout this brochure are typical. Your specific applicationshould not be undertaken without independent study and evaluation for suitability.For specific application recommendations consult Garlock. Failure to select the propersealing products could result in property damage and/or serious personal injury.Performance data published in this brochure has been developed from field testing,customer field reports and/or in-house testing.While the utmost care has been used in compiling this brochure, we assume no responsibilityfor errors. Specifications subject to change without notice. This edition cancelsall previous issues. Subject to change without notice.38