Surfacing Agent MSDS - Fiberglass Supply

More documents

Recommendations

Info

MATERIAL SAFETY DATA SHEETPAGE 285-X3SURFACING AGENT***********************************************************************SECTION IV FIRE AND EXPLOSION HAZARD DATA-----------------------------------------------------------------------Flammability Classification: Class 1CLowest Flashpoint TCC: 88.0 FExplosion Level: Lower- 1.1 Upper- 6.1Lower Flammability Limit: N/AHEAT PROTECTION PROCEDURESContainers exposed to intense heat from fires should be cooled withwater to prevent vapor pressure build up which could result incontainer rupture.EXTINGULSHING MEDIAUse C02, Dry Chemical, or Foam extinguisher.The National Fire Protection Association Class B extinguisher isdesigned to extinguish fires originating from burning liquids.SPECIAL FIRE FIGHTING PROCEDURESWater spray may be ineffective. Water may be used to cool closedcontainers to prevent pressure buildup and possible autoignition orexplosion when exposed to extreme heat. If water is used, fog nozzlesare preferable.UNUSUAL FIRE AND EXPLOSION HAZARD:Keep containers tightly closed. Isolate from heat, electricalequipment, sparks and open flame. Closed container may explode whenexposed to extreme heat. Do not apply to hot surfaces. Never usewelding or cutting torch on or near container (even empty) becauseproduct (even residue) may ignite explosively.***********************************************************************SECTION V HEALTH HAZARD DATA-----------------------------------------------------------------------Based on the presence of components (01) this product may cause skinirritation.Based on the presence of components (01) this product may cause dryingand dermatitis on repeated or prolonged exposure to the skin. Based onthe presence of components (01) this product may cause corneal, injury.Based on the presence of components (01) this product is presumed I tobe moderately toxic.FIRST AIDEYE CONTACT: Flush with luke warm water for 15 minutes. Contact aphysician immediately.SKIN CONTACT: Flush wash with copious amounts of luke warm water.Remove contaminated clothing promptly. Contact a physician immediately.INHALATION: Remove exposed individual to fresh air. Restore breathingif required. Contact a physician immediately.INGESTION; Rinse mouth immediately. Give exposed individual 6 to 8ounces of liquid. (Never give anything by mouth to an unconsciousperson.) Do NOT induce vomiting unless advised by a physician. Contacta physicianFiberglass Supply, Inc. 314 West Depot P. O. Box 345 Bingen WA 98605-0345 USAPhone: (509) 493-3464 Fax: (509) 493-4053 E-mail: fiberglass@gorge.net Web Site: www.fiberglasssupply.com
MATER1AL SAFETY DATA SHEETPAGE 385-X3SURFACING ACENT***********************************************************************immediately.***********************************************************************SECTION VI REACTIVITY DATA-----------------------------------------------------------------------CONDITIONS TO AVOIDAvoid exposure to sparks, open flame, hot surfaces, and alt sources ofhat and ignition.May produce hazardous tunes when heated to decomposition as in welding.Fumes may contain carbon monoxide, carbon dioxide, and oxides ofnitrogen.INCOMPATIBILITY (Materials to Avoid)Based on the presence of components (01) this product is incompatiblewith strong mineral acids, peroxides, and polymerization catalysts.HAZARDOUS POLYMERIZATIONMay occur.STABILITYThis product is stable.***********************************************************************SECTION VII SPILL OR LEAK PROCEDURES-----------------------------------------------------------------------STEPS TO BE TAKER IN CASE MATERIAL. IS RELEASED OR SPILLEDStay upwind and away from spill unless wearing appropriate protectiveequipment. Stop and/or contain discharge if it may be done safely. Keepall sources of ignition away. Ventilate area of spilt. Use non-sparkingtools for cleanup. Cover with inert material to reduce fumes. Keep outof drains, sewers, Or waterways Contact fire authorities. Notify localhealth and pollution control agencies. Call spill response teams itlarge spill.WASTE DISPOSAL METHODDO NOT FLUSH TO SEWER, WATERSEED, OR WATERWAY.Dispose of in accordance with local, state and federal regulations. Donot incinerate closed containers.***********************************************************************SECTION VIII SAFE HANDLING AND USE INFORMATION-----------------------------------------------------------------------PROTECTIVE EYEWEARAvoid contact with eyes. Wear goggles if there is a likelihood ofcontact with eyes. Eyewash stations and safety showers should bereadily available in handling areas.Use safety eyewear with perforated sideshields.RESPIRATORY PROTECTIONIn outdoor or open areas use (NIOSH/MSHA approved) mechanical filterrespirator to remove solid airborne particles of overspray during sprayapplication. In restricted ventilation areas use (NIOS}/MSHA approved)chemical-mechanical filters designed to remove a combination ofparticulate arid gas and vapor. In confined areas use (NIOSE/MSHAapproved) air line type respirators or hoods. Respiratory protectionmay also beFiberglass Supply, Inc. 314 West Depot P. O. Box 345 Bingen WA 98605-0345 USAPhone: (509) 493-3464 Fax: (509) 493-4053 E-mail: fiberglass@gorge.net Web Site: www.fiberglasssupply.com
Page 4 and 5: MATERIAL SAFETY DATA SHEETPAGE 485-

Surfacing Agent MSDS - Fiberglass Supply

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?