10.07.2015 Views

Revive - Germiphene

Revive - Germiphene

Revive - Germiphene

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

MATERIAL SAFETY DATA SHEETProduct name:Last revised date:Print date:REVIVE23-Dec-1021-Jul-111. SUBSTANCE AND SUPPLIER IDENTIFICATIONPRODUCT NAME:<strong>Revive</strong>MANUFACTURER: <strong>Germiphene</strong> CorporationADDRESS:1379 Colborne Street East, Brantford, Ontario N3T 5M1, CanadaPHONE: 519-759-7100FAX: 519-759-1625EMERGENCY PHONE: CANUTEC 613-996-6666PRODUCT USE:Medical, dental, aesthetic instruments rust removal.2. COMPOSITION / INFORMATION ON INGREDIENTSINGREDIENT:Isopropyl alcoholCAS No 67-63-0 % wt 5-15HAZARDOUS: yesINGREDIENT:Sodium hydroxideCAS No 1310-73-2 % wt 5-15HAZARDOUS: yesINGREDIENT:Proprietary mixture of alpha hydroxy acidsCAS No n/a % wt 60-80HAZARDOUS: mild hazard3. HAZARD IDENTIFICATIONEYES:SKIN:INGESTION:INHALATION:Corrosive. Risk of serious damage to eyes.Corrosive. Irritating to skin.Corrosive. Swallowing may cause severe burns of mouth, throat,andstomach.Corrosive. Causes burns of the upper digestive and respiratiorytracts.CHRONIC EXPOSURE: Prolonged contact has a destructive effect upon tissue.AGGRAVATION OF PRE-EXISTING CONDITIONS: Persons with pre-existing skin disorders oreye problems or impaired respiratoryfunction may be more susceptible to theeffects of the substance.<strong>Germiphene</strong> Corporation Page 1 of 4


MATERIAL SAFETY DATA SHEETProduct name:Last revised date:Print date:REVIVE23-Dec-1021-Jul-114. FIRST AID MEASURESEYES:Rinse immediately with plenty of water, also under the eyelids, forat least 15 minutes. If eye irritation persists, consult aspecialist.SKIN CONTACT: Wash off immediately with soap and plenty of water removing allcontaminated clothes and shoes.INGESTION: Immediate medical attention is required. Drink plenty of water. Donot induce vomiting. Call a physician immediately.INHALATION: Move to fresh air.5. FIREFIGHTING MEASURESEXTINGUISHING MEDIA: Carbon dioxide, foam, water.SPECIAL FIREFIGHTING PROCEDURES: Standard procedure for chemical fires.6. ACCIDENTAL RELEASE MEASURESVentilate area of leak or spill. Keep unnecessary and unprotected people away fromarea of spill. Wear appropriate personal protective equipment.Neutralize with sodaor sodium carbonate and flush with plenty of water. Soak up with inert absorbentmaterial (e.g. sand, silica gel, universal binder, sawdust). Pick up and transfer toproperly labeled containers.7. HANDLING AND STORAGEKeep in a tightly closed container. Protect from physical damage. Store in a cool,dry, ventilated area away from sources of heat, moisture and incompatibilities. Donot store with aluminum or magnesium. Do not mix with acids or organic materials.8. EXPOSURE CONTROLS / PERSONAL PROTECTIONVENTILATION:Ensure adequate ventilation, especially in confined areas.RESPIRATORY PROTECTION: Use respirator when performing operations involvingpotential exposure to vapour of the product.EYE PROTECTION:Goggles are recommended.SKIN PROTECTION:Rubber gloves are recommended.OTHER PROTECTIVE CLOTHING OR EQUIPMENT: Use lightweight protective clothing.9. PHYSICAL AND CHEMICAL PROPERTIESAPPEARANCE:Slightly yellowish, translucent liquidODOUR:SpecificPHYSICAL STATE:LiquidpH AS SUPPLIED: 4-6SPECIFIC GRAVITY @ 23°C: 1.272SOLUBILITY IN WATER: InfiniteVISCOSITY:Viscous<strong>Germiphene</strong> Corporation Page 2 of 4


MATERIAL SAFETY DATA SHEETProduct name:Last revised date:Print date:REVIVE23-Dec-1021-Jul-1110. STABILITY AND REACTIVITYSTABILITY: Stable at normal conditions.Conditions to avoid: Avoid temperatures above 200 o C.INCOPATIBILITY (MATERIALS TO AVOID): Oxidizing agents. Sodium hydroxide incontact with acids and organic halogencompounds, especially trichloroethylene, maycauses violent reactions. Contact withnitromethane and other similar nitrocompounds causes formation of shocksensitivesalts. Sodium hydroxide, even infairly dilute solution, reacts readily withvarious sugars to produce carbon monoxide.Hazardous decomposition products: Thermal decomposition can lead to release ofirritating gases and vapours.Hazardous polymerization: Does not occur.11. TOXICOLOGICAL INFORMATIONISOPROPYL ALCOHOLSODIUM HYDROXIDE:Oral rat LD50 5045 mg/kgInhalation LD50 16000 ppm / 8hrDermal rabbit LD50 12800 mg/kgOral rabbit LD50 500 mg/kg12. ECOLOGICAL INFORMATIONN/Av13. DISPOSAL CONSIDERATIONSWaste disposal method:According to state, federal, provincial, and localregulations.14. TRANSPORT INFORMATIONTransport hazard class:N/A15. REGULATORY INFORMATIONN/Av<strong>Germiphene</strong> Corporation Page 3 of 4


MATERIAL SAFETY DATA SHEETProduct name:Last revised date:Print date:REVIVE23-Dec-1021-Jul-1116. OTHER INFORMATIONPrepared by:<strong>Germiphene</strong> Technical DepartmentDisclaimerNo representations or warranties, either expressed or implied, of merchantability, fitness for a particular purpose, orof any nature are made with respect to the product or information contained in this Material Safety Data Sheet. Allinformation contained herein is presented in good faith and is believed to be appropriate and accurate. However, neitherthe above named supplier, nor any of its subsidiaries assumes any liability whatsoever for the accuracy or completenessof the information contained herein. Final determination of suitability of any material is the sole responsibility ofthe user. All meaterials may present unknown hazards and should be used with caution. Although certain hazards aredescribed herein, we cannot guarantee that these are the only hazards that exist. The buyer or user assimes all risksassociated with the use, misuse or disposal of this product. The buyer or user is responsible to comply with allfederal, state, provincial, or local regulations concerning the use, misuse, or disposal of these products.<strong>Germiphene</strong> Corporation Page 4 of 4

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!