SimSoft Working Group

More documents

Recommendations

Info

− Accomplish a DMO mission debrief followed by a local mission debrief.2. MTC ReconfigurationDescribe the reconfiguration process to split the MTC into two 2-ship partitions runningin different security partitions, to support running the next two example missionsconcurrently.3. Mission #2 Two-ship Urban Close Air SupportObjective: Train day or night CAS operations to support a ground commander in anurban environment. Accomplish CAS fundamentals in low-high threat environmentsusing low-high altitude tactics. Train the employment of HMCS/NVG and a variety ofPGM weapons (JDAMs, LGBs, AGM-65), rockets and/or internal gun against geospecificand geo-typical inserted targets.Mission Initialization:− DMO entities:− SFES entities:− Weather:− MS config:− SCL:− Database:− Initialize to:Mission Profile:None (local mission)IADS and ground threats incorporating small arms, AAA, a mix ofsingle digit SAMs (e.g. SA-2/-3/-6/-7/-9) with additional doubledigitSAMs depending on the proficiencies and learning objectivesof the sortie. A maximum amount of ground vehicle targets,including multiple vehicles and human models moving among the3D buildings in the MOUT area, with observable small arms fire.VFR day or VFR night. Insert weather, smoke haze for subsequentresets.MS #1 and #2 as F-16C Block 50 (F-110-GE-120 engine),SNIPER pod with VDL.JDAM and LGB standard configurations with 370-gallon fueltanks on stations 4 and 6.One of the DMO STADGE databases with a high resolution urbanarea.On runway, ready for takeoff, with option to initialize in air at orbitpoint prior to push in to target area.− Accomplish local pre-mission briefing.− Instructor to initialize targets. F-16s will perform ground alert, and proceed to theMOUT area for JTAC directed (role-played by IOS) targeting using availabletechniques (comm., Link-16, IR pointer, laser, ROVER, etc).− Engine start and ground weapons checks.− Two-ship departure or initialize at orbit point (instructor discretion).− Weapons checks, boresight check, FENCE check.− Use common urban grid or Target Reference Points (TRP) in an urban area.
− Once the pilots check in and work with JTAC (role-played by instructor) the pilotswill coordinate to ID, obtain clearance and destroy target(s) following jointprocedures.− Weapons deliveries from any altitude (0-40K’) IAW current tactics for threat/targetscenario. Reload/change weapons for more training.− Accomplish post-mission local debrief.
Page 3 and 4: ARINC 610 - Analogy Article
Page 5: Rev:03ARINC 610 Analogy Article1. I
Page 8 and 9: Rev:03ARINC 610 Analogy Article•
Page 10: Rev:03ARINC 610 Analogy Article4. F
Page 13 and 14: Rev:03ARINC 610 Analogy Article7. W
Page 15 and 16: Rev:03ARINC 610 Analogy Article9. A
Page 17 and 18: Rev:03ARINC 610 Analogy Article11.
Page 23 and 24: Rev:03ARINC 610 Analogy Article•
Page 31 and 32: Attachment 2Attachment 2
Page 35 and 36: 6. Contacts for Questions or Clarif
Page 39 and 40: shall include the selection of pre-
Page 41 and 42: This capability shall be designed t
Page 43 and 44: • use of BDS features and capabil
Page 45: B. Excerpt from F-16 MTC Spec. Belo
Page 49 and 50: 6. Mission #4 Advanced Intercept Da
Page 51 and 52: Booher comments for ARINC 610B IAW
Page 53 and 54: Paragraph 3.7.1.3.2 Fidelity Critic
Page 55 and 56: Takeoff/ClimbLevel OffEquipment Set
Page 63 and 64: The overall impact of the above neg
Page 65: or slews the box could also produce

SimSoft Working Group

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?