800 Series DC Permanent Magnet Motors - Photonic Sourcing
800 Series DC Permanent Magnet Motors - Photonic Sourcing
800 Series DC Permanent Magnet Motors - Photonic Sourcing
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>800</strong> <strong>Series</strong><strong>DC</strong> <strong>Permanent</strong> <strong>Magnet</strong> <strong>Motors</strong>Larger external rear output bearing for fast starts & stopsDesigned with stall torque performanceQuiet operationRotation direction: CW and CCWModel <strong>800</strong>HNLifetime lubricationUL Approved, Class F RatingModel <strong>800</strong>PApplications:Automatic TellerMachingsTransit TicketDispensersMarineNavigation AidsAircraft Lightingwww.mhrhodes-cramer.com
<strong>800</strong> <strong>Series</strong> <strong>DC</strong> <strong>Permanent</strong> <strong>Magnet</strong> <strong>Motors</strong>DescriptionM.H. Rhodes/Cramer Company <strong>DC</strong> <strong>Permanent</strong> <strong>Magnet</strong> <strong>Motors</strong> are a shaded pole, synchronous-type that provides smooth, quiet performanceand allows operation to a stall condition without damage or increase in temperature rise. External rear bearing provides stability,strength and allows for a double-ended output shaft that can be confi gured with pinions, levers, fl ats or knurls. <strong>DC</strong> permanent magnetmotors are available with a pear-shaped gearbox designed to contain a wide range of gear ratios.DimensionsModel <strong>800</strong>HNModel <strong>800</strong>PModel <strong>800</strong>HNModel <strong>800</strong>PShaft InformationTo better assist you in selecting a motor that meets your specifi -cations, please provide the following information:Shaft type (round, fl at or knurled)Shaft diameter (A)Shaft length (B)Shaft width at fl at (C)Shaft length at fl at (D)Knurl length (E)Knurl set back (F)Bearing OD (G)Bearing height (H)SpecificationsModelStarting Torque @ 1 RPMRunning Torque @ 1 RPMCurrent Input (No load)Standard VoltageOperating Temperature RangeGear Train RatingStaticDynamicNoise SuppressionMounting Centers (Round)Mounting Centers (Pear)Standard MountingAgency Approval<strong>800</strong>P and <strong>800</strong>HN60 oz. in.60 oz. in.as low as 18 ma.4 to 24 V<strong>DC</strong>+77°F to 185°F (+25°C to 85°C)Standard Duty90 oz. in.30 oz. in.Varistor type2.125 in. (53.975 mm)1.875 in. (47.625 mm)2 holeUL, RoHS CompliantFor additional shaft and motor specifi cation information, pleasevisit www.mhrhodes-cramer.com “Shaft Information” page.OptionsExtended shafts for manual rotation ofmotor or actuatorDouble-ended shafts for actuation oftwo deviceswww.mhrhodes-cramer.comM.H. Rhodes/Cramer Company105 Nutmeg Road South • South Windsor, CT 06074 USAToll Free: 877.684.6464 • PH: 860.291.8402 • FX: 860.620.0897© 2008 M.H. Rhodes/Cramer Company, Divisions of Capewell Components Company, LLC. All rights reserved. # C-<strong>800</strong>-<strong>DC</strong> Rev.03.09
Change language