Ideal Full Tools Catalogue - RF Test Solutions

Thermo-Shrink ® Heavy-Wall Heat Shrinkable Tubingn TS-46 irradiated cross-linked polyolefin with 3:1 standard shrink ration Adhesive liner provides complete insulation and protection to electrical splicesin above-grade, underground or underwater applicationsn Maximum flame retardancyn Meets UL 486D, CSA C22.2 No. 198.2, ANSI C119.1, Western UndergroundGuides Nos. 2.4, 2.5, MIL-DTL-23053/15, IEEE 383 Vertical Flame Test, ANSIC37.20.2, ICEA S-19-8 and NEMA insulation thickness requirementsHeat Shrinkn Continuous operating temperature from -55°C to 110°Cn Rated for 600V, 90°C continuous usen Shrink temperature of 120°CModelExpandedl.D.(Min.)(In.)RecoveredI.D.(Max.)(In.)NominalRecoveredWall Thickness(In.)CableRange*TS-46-400 .400 .150 .060 12-6 AWGTS-46-750 .750 .240 .090 8-1/0 AWGTS-46-1100 1.100 .350 .120 2-4/0 AWGTS-46-1500 1.500 .470 .160TS-46-2000 2.000 .630 .160*Reference only. Consult the wire manufacturer’s catalog for specific O.D. of wire and insulation.3/0 AWG-400 KCMIL250-750KCMILLength(In.)Cat.No.6 46-3439 46-34448 46-3466 46-3479 46-34848 46-3506 46-3519 46-35248 46-3549 46-35612 46-35748 46-3589 46-36918 46-37148 46-372PropertiesShrink TemperaturesHeavy Wall120°C to 250°C (200°C recommended)LISTEDContinuous Operating Temperature -55°C to 110°CTensile Strength (PSI)Ultimate ElongationSecant Modulus @ 2% StrainSpecific Gravity2,100 PSI min.600% min.25,000 PSI max.1.20 max.Heat Aging, 168 hrs. @ 175°C Tensile Strength Elongation 500%Heat Shock, 4 hrs. @ 225°CFlammabilityLow Temperature Brittle PointVolume ResistivityDielectric StrengthCorrosive EffectSolvent Resistance 24 hrs. Immersion per MIL-DTL-23053No cracks, flowing or drippingSelf-extinguishing-55°C1013ohm-cm min.500V/mil (20kV/min.)Non-corrosiveGood to excellentWater Absorption 0.5%Fungus ResistanceNo growthB-76Longitudinal Change, 3 min. +1%/-10%All values are typical performance data and are not to be used as design data.www.idealindustries.com1-800-435-0705 for Customer Service