Ideal Full Tools Catalogue - RF Test Solutions

More documents

Recommendations

Info

Stationary Gripper for RedHandle UnitsFor 10, 12 & 14 AWG WireL-5215.129Stationary Gripper for BlackHandle UnitsFor 16 thru 30 AWG wire.Short stop-latch protects wire strands bylimiting the stripping stroke to 5/32 in. andretains the slug until the wire is readyfor terminating.Transparent wire stop providesuniform stripping length.Gripper pads are available in your choice ofeither parallel, file or grit-type. File-type padsmay be used on hard-to-grip insulations such asKapton ® and some Teflon ® .L-5217Stripmaster ® Wire StrippersReplacement Gripper PadsFor Custom Stripmaster ® and Custom Steel Stripmaster ® WireStrippersSurfaceTypeGripper Set*Cat. No.Movable GripperCat. No.Stationary Gripper(Thickness)Grit** LB-197 L-5212 L-5215 (.129 in.)Grit** LB-198 L-5212 L-5217 (.156 in.)File LB-721 LB-718 LB-719 (.129 in.)File LB-722‡ LB-718 LB-720 (.156 in.)Parallel LB-730 LB-727 LB-728 (.129 in.)Parallel LB-731 LB-727 LB-729 (.156 in.)For Custom Stripmaster ® Lite Wire StrippersSurfaceTypeGripper Set*Cat. No.Movable GripperCat. No.Stationary Gripper(Thickness)Grit* LB-1188 LB-882 LB-883 (.109 in.)File LB-1189 LB-1184 LB-1185 (.109 in.)Parallel LB-1190 LB-1186 LB-1187 (.109 in.)* Gripper Set includes one movable gripper, one stationary gripper.** Grit pads are standard for most Custom Stripmaster ® and CustomStripmaster ® Lite products.‡ These are for use on hard-to-grip surfaces such as Kapton ® and Teflon ® .Gripper pad selection depends on insulation type and user preference.Note: For 10-14 AWG, use .129 in. stationary gripper. For 16-30 AWG, use .156 in.gripper.Replacement Frame AssembliesFor Custom Stripmaster ® Wire StrippersFor Custom Stripmaster ® Lite Wire StrippersFrame onlyFrame only, Wire Stop and LatchFor Custom Steel Stripmaster ® Wire StrippersFrame only, 10-14 AWGFrame only, 16-30 AWGFrame only, 10-14 AWG, internal spring (see note)Frame only, 16-30 AWG, internal spring (see note).156Cat. No.Frame only, 10-14 AWG L-5616Frame only, 16-30 AWG L-5617Frame only, 10-14 AWG, Wire Stop and Latch L-5618Frame only, 16-30 AWG, Wire Stop and Latch L-5619Frame only, 10-14 AWG, internal spring (see note) L-9039Frame only, 16-30 AWG, internal spring (see note) L-9038Note: Frames with internal springs allow additional blade penetration pressure fordifficult and multi-layered insulation types.Cat. No.LB-895LB-896Cat. No.LB-1091LB-1092LB-1090LB-1089Note: Frames with internal springs allow additional blade penetration pressure fordifficult and multi-layered insulation types.Optional AccessoriesShort Stop-LatchCat. No.For Custom & Custom Steel Stripmaster ® Wire Strippers L-5269For Custom Stripmaster ® Lite Wire StrippersLB-1194Transparent Adjustable Wire Stop AssemblyCat. No.For Custom & Custom Steel Stripmaster ® Wire Strippers L-5270For Custom Stripmaster ® Lite Wire StrippersLB-1195C-6www.idealindustries.com1-800-324-9571 for Customer Service
Stripmaster ® Wire StrippersCustom Stripmaster ® Wire Stripper and Custom Stripmaster ® Lite Wire Stripper MIL-spec reference chartWire Specification Custom Stripmaster ® Custom Stripmaster ® LiteCat. No. Blade Only Cat. No. Wire Gauge Cat. No. Blade Only Cat. No. Wire GaugeMIL-W-81044/4/5/6MIL-W-5086/1/7MIL-W-81044/8/9/10MIL-W-16878/5MIL-W-81381/3/445-17045-17145-17345-17445-175MIL-W-22759/32/33/44/45/46 45-198745-1654MIL-81044/11/12/13MIL-W-22759/34/35/41/42/43Raychem 44A021X, 44/051XMIL-W-16878/4MIL-W-22759/11/12/22/2345-161145-250045-198745-17845-17645-161145-17745-178MIL-W-81044/16/17 45-161145-1610MIL-W-81381/1/2//6/7/8/9/10/17/21 45-160945-155145-178MIL-W-81381/11/12/13/14/2245-160845-165445-178MIL-W-22759/18/19 45-160845-1551L-5210L-5211L-5562L-5563L-556445-1987-145-1654-145-1611-145-2500-145-1987-1L-5561L-555945-1611-1L-5560L-556145-1611-145-1610-145-1609-145-1551-1L-556145-1608-145-1654-1L-556145-1608-145-1551-110-14 AWG16-26 AWG10-14 AWG16-26 AWG26-30 AWG16-26 AWG16-26 AWG10-14 AWG10-14 AWG16-26 AWG26-30 AWGN/A N/A N/A45-63545-63745-63745-213345-213245-213345-211845-640LB-915LB-917LB-91745-2133-145-2132-145-2133-145-2118-1LB-92016-22 AWG24-30 AWG24-30 AWG16-24 AWG16-24 AWG16-24 AWG20-26 AWG24-30 AWG10-14 AWG10-14 AWG16-26 AWG26-30 AWG 45-640 LB-920 24-30 AWG10-14 AWG16-26 AWG45-2131 45-2131-1 16-24 AWG10-14 AWG16-26 AWG26-30 AWG 45-640 4LB-920 24-30 AWG10-14 AWG16-26 AWG26-30 AWG10-14 AWG16-26 AWG45-640 4LB-920 24-30 AWGN/A N/A N/AMIL-W-81381/17/21 45-1633 45-1633-1 16-26 AWG 45-2020 45-2020-1 20-26 AWGMIL-W-81381/18/19/20 45-160945-1551MIL-W-22759/16/17 45-161145-198745-1609-145-1551-145-1611-145-1987-110-14 AWG16-26 AWG10-14 AWG16-26 AWG 45-213345-2118N/A N/A N/A45-2133-145-2118-1MIL-W-24640/19/22/23/24 45-1957 45-1957-1 14-22 AWG N/A N/A N/AMIL-W-85485/5/6/7/8 45-192545-1924MIL-W-85485/9/10/11/12MIL-W-85485/9/1045-161145-1610BMS 1360 Type 1-6, 19-21, 23-27, 33-34 45-254145-2543BMS 1360 Type 12-18, 28-32 45-254245-2544BMS 1360 Type 7-12 45-256545-2564MIL-W-22759/80/81/82/91/92 45-254245-2544MIL-W-22759/83/84/85/86/87/88/89/90 45-254145-254345-261845-1925-145-1924-145-1611-145-1610-145-2541-145-2543-145-2542-145-2544-145-2565-145-2564-145-2542-145-2544-145-2541-145-2543-145-2618-110-14 AWG16-24 AWG16-24 AWG22-26 AWGN/A N/A N/A10-14 AWG16-24 AWG 45-2131 45-2131-1 16-24 AWG10-14 AWG16-24 AWG 45-2697 45-2697-110-14 AWG16-24 AWG10-14 AWG16-26 AWG10-14 AWG16-24 AWG 45-269345-269210-14 AWG16-24 AWG16-26 AWG16-24 AWGN/A N/A N/AN/A N/A N/A45-2693-145-2692-116-22 AWG20-26 AWG45-2685 45-2685-1 16-24 AWGStripmaster ® Wire StrippersNOTE: The above blades represent the best blade for nominal conductor sizes within the wire spec. tolerance. If the conductor size is over or under the nominal dims. an alternate blade may berequired. Please contact our wire stripping applications engineer at 1-800-324-9571 for alternate blades and for blade numbers for MIL-specs. not listed on this chart.1-800-324-9571 for Customer Service www.idealindustries.com C-7
Page 1 and 2:
FULL-LINE CATALOGVISION. PERFORMANC
Page 3 and 4:
TABLE OF CONTENTSWire TerminationTw
Page 7:
Wire TerminationWing-Nut ® Wire Co
Page 11:
Wire TerminationWire-Nut ® WireCon
Page 14 and 15:
In-Sure Push-In Wire ConnectorsWire
Page 16 and 17:
Crimp Terminals-Rings, Forks, Disco
Page 18 and 19:
Vinyl Insulated Multi-Stack Disconn
Page 20:
Disconnect Adapter - Male to Female
Page 25 and 26:
Wire TerminationThe Buchanan C-24 C
Page 28 and 29:
Splice Cap Crimp ConnectorsFour-Way
Page 30 and 31:
Ordering InformationUse the followi
Page 32 and 33:
B-TAP ® Insulation-Piercing Tap Co
Page 34 and 35:
200 Series Terminal Blocks - Nylon
Page 36 and 37:
Nylon INTERMEDIATE HEAVY DUTY Termi
Page 38 and 39:
Phenolic Fuse BlocksTerminal Blocks
Page 40:
Mounting ChannelsJumpersJumper for
Page 43 and 44:
Tools & SuppliesFish Tape Cases and
Page 45 and 46:
Tools & SuppliesS-Class ® Fish Tap
Page 47 and 48:
Tools & SuppliesTuff-Rod Fishing Po
Page 49 and 50:
Tools & SuppliesYellow 77 ® Plus W
Page 51 and 52:
Tools & SuppliesDuct SealNoalox ®
Page 53 and 54:
Tools & SuppliesHickeysBenderBootn
Page 55 and 56:
Tools & SuppliesConduit MeasuringTa
Page 57 and 58:
Tools & SuppliesKinetic SuperWire S
Page 59 and 60:
Tools & SuppliesV-Notch Strippern C
Page 61 and 62:
Tools & SuppliesCable Rippern Slits
Page 63 and 64:
Tools & SuppliesSide-Cutting Pliers
Page 65 and 66:
Tools & SuppliesCable Cutters35-305
Page 67 and 68:
Tools & SuppliesSide-Cutting Pliers
Page 69 and 70:
Tools & SuppliesMulti-Crimp Toolsn
Page 71 and 72:
Tools & Supplies9-in-1 Ratch-a-NutS
Page 73 and 74:
Tools & SuppliesCushioned-Grip Scre
Page 75 and 76:
Tools & SuppliesQuick-Rotatingn Ide
Page 77 and 78:
Tools & SuppliesNutmaster ® Nutdri
Page 79 and 80:
Tools & Suppliesn Handles all commo
Page 81 and 82:
Tools & SuppliesTorpedo Leveln 9 in
Page 83 and 84:
Tools & SuppliesTool Kits featuring
Page 85 and 86:
Tools & SuppliesElectrician’s Too
Page 87 and 88:
Tools & SuppliesLarge Mouth BagsJou
Page 89 and 90:
Tools & SuppliesJourneyman Insulate
Page 91 and 92:
Tools & SuppliesFuse Puller and Tes
Page 93 and 94:
Tools & SuppliesCarbide Tipped Hole
Page 95 and 96:
Tools & SuppliesTri-Bore Multi-Purp
Page 97 and 98:
Tools & SuppliesHole Saw KitsHole S
Page 99 and 100:
Tools & SuppliesLong-Life Metal Cut
Page 101 and 102:
Tools & SuppliesNailbiter Premium S
Page 103 and 104: Tools & SuppliesJab SawHeavy-Duty H
Page 105 and 106: Tools & SuppliesPlenum TiesUL Liste
Page 107 and 108: Tools & SuppliesStandard (50 lb.) T
Page 109 and 110: Tools & SuppliesMounting Padsn Pate
Page 111 and 112: Tools & SuppliesGrommets*n Installs
Page 113 and 114: Tools & SuppliesCoaxial Cable Strap
Page 115 and 116: Tools & SuppliesThermo-Shrink ® Th
Page 117 and 118: Tools & SuppliesThermo-Shrink ® Me
Page 119 and 120: Tools & SuppliesWire Marker Booklet
Page 121 and 122: Tools & SuppliesStandard and Heavy-
Page 123 and 124: Tools & SuppliesMedium and Light-Du
Page 125 and 126: Tools & SuppliesFull-Size Rocker Sw
Page 127 and 128: Tools & SuppliesPush-Button Switche
Page 129 and 130: Tools & SuppliesDoor and Slide Swit
Page 131 and 132: Tools & SuppliesMiniature Indicator
Page 133 and 134: Tools & SuppliesHow to Select Resur
Page 135 and 136: Tools & SuppliesBasic Lockout/Tagou
Page 137 and 138: Tools & SuppliesIndustrial Lockout/
Page 139 and 140: Tools & SuppliesMulti-Pole Breaker
Page 141 and 142: Tools & SuppliesCircuit Breaker Loc
Page 143 and 144: Tools & SuppliesAdjustable Cable Lo
Page 145 and 146: Tools & SuppliesHeavy-Duty Lockout
Page 147 and 148: Tools & SuppliesDetectable Undergro
Page 150 and 151: Stripmaster ® and Stripmaster ® L
Page 152 and 153: Custom Stripmaster ® Wire Stripper
Page 156: Free Application Engineering Servic
Page 159 and 160: Test & MeasurementTightSight ® Cla
Page 161 and 162: Test & MeasurementMultimeter Select
Page 163 and 164: Test & Measurement361 Contractor-Gr
Page 165 and 166: Test & MeasurementOpen/Closed Circu
Page 167 and 168: Test & MeasurementCursors continuou
Page 169 and 170: Test & MeasurementMini AFCI/GFCI Fa
Page 171 and 172: Test & MeasurementInsulation Tester
Page 173 and 174: Test & MeasurementSplit-Jaw Smart M
Page 175 and 176: Test & MeasurementDigital Light Met
Page 177 and 178: Test & MeasurementThermocouplen Mea
Page 180 and 181: LanTEK ® II Series Cable Certifier
Page 182 and 183: 10 Gigabit Alien Crosstalk Testing
Page 184 and 185: SecuriTEST PRO CCTV/Security Tester
Page 186 and 187: Test-Tone-Trace KitVDV MultiMedia C
Page 188 and 189: Compression ConnectorsRTQ Reg/Tri/Q
Page 190 and 191: Compression Connector InstructionsC
Page 192 and 193: F-Type Coaxial ConnectorsF-Series C
Page 194 and 195: Punch Down ToolsRatchet TelemasterV
Page 196 and 197: UTP/STP/Coaxial Cable Strippersn Ad
Page 198 and 199: Round Cable Slitting and Ringing To
Page 200 and 201: Pro Installer Kit - 33-945n This pr
Page 202 and 203: Technician’s Service Kit - 33-505
Page 204 and 205:
FiberMASTER Fiber Optic Test KitMea
Page 206 and 207:
DualScribe Double-EndedFiber Optic
Page 208 and 209:
Item Page Item Page Item Page Item
Page 210 and 211:
Page 212 and 213:
Page 214 and 215:
Page 216 and 217:
Page 218 and 219:
Page 220 and 221:
Page 222 and 223:
Page 224 and 225:
Page 226 and 227:
®OUR GLOBAL NETWORK OFOPERATING LO
Page 228:
WirE Termination n Tools & Supplies
show all

Ideal Full Tools Catalogue - RF Test Solutions

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?