Multi-functional electric energy meters - Circutor

More documents

Recommendations

Info

Multi-functional electric energy metersSELECTION TABLE - Three-phase Energy MetersCIRWATT - - x -TYPE METER TB III TC TD4 wires • • • 40.2S active class / 0.5 Reactive class • 020.5S active class/ 1.0 Reactive class • 05C Active class / 1.0 Reactive class 05B Active class / 2.0 Reactive class • 103 x 57 / 100 V a.c. (4w) • L3 x 63.5 / 110 V a.c. (4w) • • M3 x 127 / 220 V a.c. • • N3 x 220 / 380 V a.c. • O3 x 230 / 400 V a.c. (4w) • • Q3 x 127 / 220 V a.c....3x230/400 Va.c. • • U5 (10) A Transformer • • • T510 (100) A Direct • • D150 Hz • • A60 Hz • • BAutomatic (50 / 60 Hz) • CConnectionmodeAccuracyMeasuredvoltageCurrent measureFrequencyWithout communications • 0R1 / R2 (PLC) RS232 / -R1 / R2 (PLC) RS485 / -R1 / R2 (PLC) Ethernet / -R1 / R2 (PLC)R1 / R2 (PLC)R1 / R2 (PLC)R1 / R2 (PLC)R1 / R2 (PLC)R1 / R2 (PLC)R1 / R2 (PLC)R1 / R2 (PLC)RS232/ - (PLC A)RS232/ - (PLC B)RS232 /RS232RS485 /RS485RS232 /RS485RS232 /Ether.RS232/USBRS485 /Ether.RS232 /RS232RS232 /RS485RS232 /Ether.PLC A 4PLC B 5RS232 /RS232RS485 /RS485RS232 /RS485RS232 /Ether.Without card • 0Inputs / outputs (optomos) ● ● ● 4inputs / outputs (relay) ● ● ● 5Inputs (water and gas) ● AEarth leakage measure ● B123789ACDCommunicationsExpansionmodulestype B meter • Btype C meter • CTypetype D meter • DImport only (2 Quadrants) • • 0Bidirectional (4 Quadrants) • • • 1Unidirectional (4 Quadrants) • 2Without more features • • • 0Cutoff relay • 2RegistrationmodeMore featuresQ1-6
Multi-functional electric energy metersCIRWATT ASingle-phase active energy meter, Class 1DescriptionCIRWATT A is a single-phase, digital multifunctionmeter, Class 1, for the metering ofactive energy.CIRWATT A complies with the existing regulationsapplicable to electronic meters and ithas an autonomous data retention systemthat avoids them from being lost when thereis an interruption in the power supply. Likewise,it can be read through the screen (evenwhen there is no power supply) and throughthe optical port (protocol IEC-61107).ApplicationIt has been specially designed for installationswhere electromechanical meters do notsatisfy the current needs, particularly thosethat require a single-phase meter with a billingsystem.FeaturesPower supplyBatteryNominal voltage 127 V or 230 V (depending on the type) Type LithiumTolerance 80 %... 120 % U nWorking life > 10 yearsConsumption < 0,4 W ClockFrequency 50 / 60 Hz Type Grid frequency quartz oscillatorOperating range - 20 ... + 60 ºC Drift < 0.5 s/day at 25 ºCMeasured voltageRelay outputsConnection Asymmetrical Type Mechanical relay ; 230 V - 10 AReference voltages 127 V or 230 V (depending on the type) LED outputsFrequency 50 / 60 Hz Maximum rate 1000 pulses / kW·hMeasured currentSecurityCategory III (110 V) inaccordance with EN-61010Currents (In) 5 (60) A, 10 (60) A, 10 (120) A Build featuresAccuracy Enclosure In compliance with DIN 43859Active energy Class 1.0 (IEC 62053-21) Dimensions In compliance with DIN 43857Calculation and processing Degree of protection IP 51Microprocessor Based on DSP Optical reader IEC-61107 for local accessConverter 16 bits EventsMemoryInverse consumption detectionData RAM type, stored by Lithium battery Total inverse energySetup and events Non-volatile memory of the FLASH type Operating hoursTerminal cover opening detectionQ1-7
Page 3: Multi-functional electric energy me
Page 10 and 11: 6Multi-functional electric energy m
Page 12 and 13: 9Multi-functional electric energy m
Page 14 and 15: Multi-functional electric energy me
Page 38: Q1-38Multi-functional electric ener

Multi-functional electric energy meters - Circutor

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?