Nokia Access Product Catalogue - Mic Data

More documents

Recommendations

Info

RedBack Redback products are focussed on three main functionalities as follows: BRAS, Edge Router and Ethernet aggregation. Operators may use the same equipment for many different purposes including termination of DSL connections, deployment of VOIP, VoD and offering MPLS/VPN L2/L3 services with sophisticated QoS features for business customers. There are several interface types available for network connection. The SmartEdge TM 800 30 Broadband <strong>Access</strong> The SmartEdge TM 800 Router is targeted at IP dedicated access services, as well as hosting and network based storage sites and backbone core applications. The product is distinguished by a number of features for providers focused on delivering highly available IP services today, and having total flexibility to support new IP services in the future. Software modularity and process restartability The SmartEdge OS is highly modular to improve system reliability. Every protocol such as PPP, SNMP, BGP, OSPF, IS-IS, and RIP is implemented as a separate process. The Routing Information Base (RIB) and configuration UI are also separate processes. Failure of one process has no impact on any other process. For example, if a network event crashes BGP process it does not affect any other protocols and does not cause a system crash. If any process fails, it can simply be restarted without affecting any other process. High-performance switching and programmable forwarding The SmartEdge 800 platform employs a very high-performance packet mesh, whereby every card is interconnected to every other card. The packet mesh has 160 Gbps of switching capacity and is built with ASICs developed by Redback. All of the packet forwarding functions in the SmartEdge 800 are implemented with Redback’s specialized network processors, called Packet Processing ASICs (PPA). The SmartEdge 800 platform uses a dedicated PPA on every line card for input packet processing and another dedicated PPA on every line card for outgoing packet processing. With dedicated packet processors for incoming and outgoing traffic, the SmartEdge 800 platform can support high-performance forwarding, with a rich set of packet processing features (ACLs, rate limiting, etc.) turned on, both on the access side (toward the customer) and the backbone side. Since PPA is fully programmable, new services can be introduced simply by reprogramming them with right software code. Thus, PPAs offer investments protection along with ability to add new functionality with virtually no hardware swap. Distributed forwarding Forwarding functions on the SmartEdge 800 platform are distributed on every line card and handled by the PPA. A failure of one line card has no impact whatsoever on packet forwarding for any other line card. Thus, there is no central point of failure for packet forwarding, even for specialized packet types. Chassis: The SmartEdge 800 chassis has 14 slots with 2 slots dedicated to the controller cards and 12 slots available for a flexible combination of traffic cards. A separate area of the chassis has fans for forced-air cooling. The SmartEdge 800 chassis is designed for mounting in a standard 19- or 23-inch rack. All cards are installed at the front of the chassis. With the exception of the DS-3 and E3 traffic cards, the cards have port connectors on their front panels. Connectors for the DS-3 and E3 cards that are installed in slots 1 to 5 and 10 to 14 are located at the rear of the chassis.
The SmartEdge TM 400 Available Interface The SmartEdge TM 400 The SmartEdge 400 router is a carrier-class product with an architecture that supports packetized traffic. The SmartEdge 400 router can be used as an edge aggregation router to directly connect customers to the network and supports a variety of interfaces and vital services, such as quality of service (QoS) and inbound and outbound access control lists (ACLs). New services can easily be added with software upgrades. Because of the optimized packet forwarding capabilities and support of highbandwidth uplink interfaces, the SmartEdge 400 router can also be used in the metropolitan core to aggregate traffic from other routers into the long-haul transit core. The SmartEdge 400 chassis has six slots with two slots dedicated to the controller cards and four slots available for a flexible combination of traffic cards. A separate area of the chassis has fans for forced-air cooling. The SmartEdge 400 chassis is designed for mounting in a standard 19- or 23-inch rack. All cards are installed at the front of the chassis. With the exception of the DS-3 and E3 traffic cards, the cards have their port connectors on their front panels. The BNC connectors for the DS-3 and E3 cards are located at the rear of the chassis. Cable management brackets are attached to the right side of the front of the chassis and to the left side of the rear of the chassis. SmartEdge 400 can handle up to 24000 simultanious connections. Available interfaces are the same for SmartEdge 400 & SmartEdge 800. Among the available interfaces the newest are the 3rd generation interfaces: Gigabit Ethernet Cards, Gigabit Ethernet 1020 and 10-Gbps Gigabit Ethernet. Packet - POS, FR, PPP • 1 x OC-48c/STM-16 • 4 x OC-12c/STM-4 • 8 x OC-3c/STM-1 • 12 x Clear Channel DS3 • 24 x Channelized E1 copper Channelized Packet • 1 x Channelized OC-12 (DS3) • 1 x Channelized OC-12 (DS3/DS1) • 12 x Channelized T3 • 3 x Channelized T3 • 3 x Channelized STM1-> E1 Route Processors • XCRP3-Base • XCRP3-Advanced Ethernet • 1x10 Gbit Ethernet XFP opt module • 10x1 Gbit Ethernet SFP opt modules • 20x1 GigE GE1020+exp SFP opt modules • 4 x Gigabit Ethernet • 4 x Gigabit Ethernet-Adv • 4 x Gigabit Ethernet Traffic management features • 12 x 10/100 Ethernet ATM • 12 x DS3 ATM • 2 x ATM OC-3c/STM-1 • 4 x ATM OC-3c/STM-1 • 1 x ATM OC-12c/STM-4 Broadband <strong>Access</strong> 31
Page 1: Nokia Access Product Catalogue Wire
Page 4 and 5: Access Products 4
Page 6 and 7: Dynanet ACM2 TPS 64 Q1 DCN 6 Access
Page 8 and 9: PDH DF2-8 and DF34 DM8 and DM34 CO2
Page 10 and 11: Mechanics Mechanics and power Mecha
Page 12 and 13: Power Supply A power supply system
Page 14 and 15: Installation Distribution frames Ca
Page 16 and 17: Copper Access Equipments (Modems) D
Page 18 and 19: Copper Access Equipments (Modems) D
Page 20 and 21: Nokia NMS/10 NMS/10 is an integrate
Page 22 and 23: Nokia Broadband Management Suite Th
Page 24 and 25: MetroHopper PDH radio Nokia MetroHo
Page 26 and 27: FlexiHopper Microwave radio FIU 19E
Page 28 and 29: 28 Broadband Access
Page 32 and 33: RedBack Gigabit Ethernet cards Giga
Page 34 and 35: Nokia Networks´ Service Portfolio
Page 36: Copyright © 2006 Nokia. All rights

Nokia Access Product Catalogue - Mic Data

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?