Quartz Crystal Microbalance Digital Controller

More documents

Recommendations

Info

CertificationStanford Research Systems certifies that this product met its published specifications at the timeof shipment.WarrantyThis Stanford Research Systems product is warranted against defects in materials andworkmanship for a period of one (1) year from the date of shipment.ServiceFor warranty service or repair, this product must be returned to a Stanford Research Systemsauthorized service facility. Contact Stanford Research Systems or an authorized representativebefore returning this product for repair.Information in this document is subject to change without notice.Copyright © Stanford Research Systems, Inc., 2004. All rights reserved.Stanford Research Systems, Inc.1290-C Reamwood AvenueSunnyvale, California 94089www.thinkSRS.comPrinted in U.S.A.QCM200 Quartz Crystal Microbalance
Safety and Preparation For UseiSafety and Preparation for UseLine VoltageThe QCM200 Controller operates from a 90-132 or 175-264 VAC power source having aline frequency between 47 and 63 Hz. Power consumption is 20 VA total.Power Entry ModuleA power entry module, labeled A.C. POWER on the back panel of the QCM200 providesconnection to the power source and to a protective ground.Power CordThe QCM200 package includes a detachable, three-wire power cord for connection to thepower source and protective ground.The exposed metal parts of the box are connected to the power ground to protect againstelectrical shock. Always use an outlet which has a properly connected protective ground.Consult with an electrician if necessary.Keep all electrical wiring in your experimental setup neatly organized and in goodworking condition. Inspect all HV wires periodically for problems as part of your safetycheckups.GroundingA chassis grounding lug is available on the back panel of the QCM200. Connect a heavyduty ground wire, #12AWG or larger, from the CHASSIS GROUND lug directly to afacility earth ground to provide additional protection against electrical shock.BNC shields are connected to the chassis ground and the AC power source ground via thepower cord. Do not apply any voltage to the shield.GFCI (Ground Fault Circuit Interrupter)GFCI protected outlets are often available in production and laboratory environments,particularly in proximity to water sources. GFCI’s are generally regarded as an importantdefense against electrocution. However, the use of GFCI in conjunction with theQCM200 must not be regarded as a substitute for proper grounding and careful systemdesign. GFCI’s must also be tested regularly to verify their functionality. Always consultan electrician when in doubt.Line FuseThe LINE FUSE is internal to the instrument and may not be serviced by the user.QCM200 Quartz Crystal Microbalance
Page 1: Operation and Service ManualQCM200Q
Page 5 and 6: ContentsiiiContentsSafety and Prepa
Page 7 and 8: OverviewvFront Panel OverviewFigure
Page 9 and 10: OverviewviiBack Panel OverviewFigur
Page 11 and 12: OverviewixQCM25 Crystal Oscillator
Page 13 and 14: SpecificationsxiSpecificationsQCM20
Page 15 and 16: Getting Started 1Chapter 1Getting S
Page 17 and 18: Chapter 1 Getting Started 3Quick St
Page 19 and 20: Chapter 1 Getting Started 5Paramete
Page 21 and 22: Chapter 1 Getting Started 7Liquid S
Page 23 and 24: Chapter 1 Getting Started 98. Place
Page 25 and 26: Chapter 1 Getting Started 11Flow Ce
Page 27 and 28: Chapter 1 Getting Started 13Operati
Page 29 and 30: Theory, Operation and Calibration 1
Page 31 and 32: Chapter 2 Theory, Operation and Cal
Page 53 and 54:
Chapter 2 Theory, Operation and Cal
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Sensor Crystals and Holders 49Chapt
Page 65 and 66:
Chapter 3 Sensor Crystals and Holde
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
QCM Circuit Description 75Chapter 4
Page 91 and 92:
Chapter 4 QCM Circuit Description 7
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Frequency Counter Selection Criteri
Page 115 and 116:
QCM200 Remote Progamming 101Appendi
Page 117 and 118:
Appendix B QCM200 Remote Programmin
Page 119 and 120:
Appendix B QCM200 Remote Programmin
show all

Quartz Crystal Microbalance Digital Controller

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?